Package: installation-reports Severity: normal Tags: d-i
-- Package-specific info: Boot method: network Image version: http://d-i.debian.org/daily-images/armel/20150415-00:19/kirkwood/network-console/qnap/ts-219/kernel Date: 2015-04-15 Machine: QNAP Turbo Station TS-212 Partitions: # fdisk -l Disk /dev/mtdblock0: 512 KiB, 524288 bytes, 1024 sectors Disk /dev/mtdblock1: 2 MiB, 2097152 bytes, 4096 sectors Disk /dev/mtdblock2: 9 MiB, 9437184 bytes, 18432 sectors Disk /dev/mtdblock3: 3 MiB, 3145728 bytes, 6144 sectors Disk /dev/mtdblock4: 256 KiB, 262144 bytes, 512 sectors Disk /dev/mtdblock5: 1,3 MiB, 1310720 bytes, 2560 sectors Disk /dev/md2: 517,6 MiB, 542769152 bytes, 1060096 sectors Disk /dev/md9: 517,6 MiB, 542769152 bytes, 1060096 sectors Disk /dev/md13: 448,1 MiB, 469893120 bytes, 917760 sectors Disk /dev/sda: 29,9 GiB, 32126271488 bytes, 62746624 sectors Disk /dev/sdb: 465,8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Clock/timezone setup: [O] User/password setup: [O] Detect hard drives: [O] Partition hard drives: [ ] Install base system: [O] Install tasks: [O] Install boot loader: [ ] Overall install: [O] Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install: - As I have a serial cable connected to it I am able to intercept the automatic u-boot boot sequence. That way I entered to load kernel/initrd from a TFTP server. - Booting that way did not show any error to me. - On the serial line I got asked to setup a password for the install user. - Via SSH with this user and password I am able to login to the installer. - From there the installation went nearly like any other debian installation. - I installed to an USB stick. Before this I had a debootstrapped wheezy installation which neeeds also the kernel/initrd to be loaded via TFTP. That way I was still able to boot the original firmware (even when I did nearly never used it anymore). That way I tried to maintain the original firmware in a working state even when installing Jessie. But I was not aware that the Installer would overwrite the kernel in the internal flash without further asking. (Most probably because the internal flash holds for installations without serial console already the kernel/initrd of the debian installer.) As a comparision on x86 the user gets asked where or even if the bootloader should be installed. So that is not a big problem as I would have somewhere backups of the internal flash around (which I probably will never need) and also now I can just power up this device and can just upgrade the kernel without the hazzle :-) (Therefore I was not sure if I should file against debian-installer or give it another severity.) Thanks for maintaining this awesome Distribution. Kind regards, Bernhard -- on the initial u-boot prompt: # right after power on press enter to avoid the automatic timeout setenv serverip 192.168.178.199; setenv ipaddr 192.168.178.139; setenv bootargs console=ttyS0,115200 initrd=0xa00000,0xa00000 ramdisk=34816; tftpboot 0x400000 /boot/linux/debian-installer-netboot/jessie-8rc2-daily-2015-04-15_kirkwood/kernel; tftpboot 0xa00000 /boot/linux/debian-installer-netboot/jessie-8rc2-daily-2015-04-15_kirkwood/initrd.gz; bootm 0x400000 -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="8 (jessie) - installer build 20150415-00:11" X_INSTALLATION_MEDIUM=network-console ============================================== Installer hardware-summary: ============================================== uname -a: Linux nas3c3b5d 3.16.0-4-kirkwood #1 Debian 3.16.7-ckt9-2 (2015-04-13) armv5tel GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. 88F6281 [Kirkwood] ARM SoC [11ab:6281] (rev 03) lspci -knn: Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab] usb-list: usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 01 usb-list: Manufacturer: Linux 3.16.0-4-kirkwood ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 01 Device 02: USB2.0 Hub [05e3:0608] usb-list: Level 01 Parent 01 Port 00 Class 09(hub ) Subclass 00 Protocol 01 usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 01 Device 03: PCTV 460e [2013:024c] usb-list: Level 02 Parent 02 Port 01 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: PCTV Systems usb-list: Interface 00: Class ff(vend.) Subclass 00 Protocol 00 Driver <none> usb-list: usb-list: Bus 01 Device 04: Slider 3.0 [1b1c:1a06] usb-list: Level 02 Parent 02 Port 03 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: Corsair usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver usb-storage lsmod: Module Size Used by lsmod: dm_mod 79965 0 lsmod: raid1 27872 3 lsmod: md_mod 103547 1 raid1 lsmod: jfs 156194 0 lsmod: crc32c_generic 1405 1 lsmod: btrfs 943406 0 lsmod: xor 4057 1 btrfs lsmod: raid6_pq 83506 1 btrfs lsmod: vfat 8641 0 lsmod: fat 48792 1 vfat lsmod: ext4 451043 1 lsmod: mbcache 5495 1 ext4 lsmod: jbd2 79979 1 ext4 lsmod: usb_storage 40389 2 lsmod: sd_mod 35766 7 lsmod: crc_t10dif 984 1 sd_mod lsmod: crct10dif_common 1154 1 crc_t10dif lsmod: ehci_orion 3054 0 lsmod: evdev 9207 0 lsmod: sata_mv 26284 3 lsmod: ehci_hcd 55676 1 ehci_orion lsmod: libata 150388 1 sata_mv lsmod: scsi_mod 164902 3 usb_storage,libata,sd_mod lsmod: usbcore 166603 3 usb_storage,ehci_hcd,ehci_orion lsmod: usb_common 1850 1 usbcore lsmod: mvmdio 2979 0 lsmod: mv643xx_eth 26378 0 lsmod: of_mdio 2348 2 mvmdio,mv643xx_eth lsmod: libphy 23128 3 mvmdio,of_mdio,mv643xx_eth lsmod: gpio_keys 7782 0 df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 25384 92 25292 0% /run df: devtmpfs 121652 0 121652 0% /dev df: /dev/sdb3 4674688 736260 3873220 16% /target df: /dev/sdb3 4674688 736260 3873220 16% /dev/.static/dev df: devtmpfs 121652 0 121652 0% /target/dev free: total used free shared buffers free: Mem: 253820 192988 60832 0 24328 free: -/+ buffers: 168660 85160 free: Swap: 2047996 16324 2031672 /proc/cmdline: console=ttyS0,115200 initrd=0xa00000,0xa00000 ramdisk=34816 /proc/cpuinfo: processor : 0 /proc/cpuinfo: model name : Feroceon 88FR131 rev 1 (v5l) /proc/cpuinfo: BogoMIPS : 1198.08 /proc/cpuinfo: Features : swp half thumb fastmult edsp /proc/cpuinfo: CPU implementer : 0x56 /proc/cpuinfo: CPU architecture: 5TE /proc/cpuinfo: CPU variant : 0x2 /proc/cpuinfo: CPU part : 0x131 /proc/cpuinfo: CPU revision : 1 /proc/cpuinfo: /proc/cpuinfo: Hardware : QNAP TS-119/TS-219 /proc/cpuinfo: Revision : 0000 /proc/cpuinfo: Serial : 0000000000000000 /proc/ioports: 00001000-0000ffff : PCI0 I/O /proc/ioports: 00010000-0001ffff : PCI1 I/O /proc/iomem: 00000000-0fffffff : System RAM /proc/iomem: 00008000-0053edeb : Kernel code /proc/iomem: 00586000-0062848b : Kernel data /proc/iomem: e0000000-e7ffffff : PCIe 0 MEM /proc/iomem: e8000000-efffffff : PCIe 1 MEM /proc/iomem: f1001418-f100141b : kirkwood_cpuidle /proc/iomem: f1010300-f101031f : rtc-mv /proc/iomem: f1010600-f10107ff : orion_spi.0 /proc/iomem: f1010600-f10107ff : orion_spi.0 /proc/iomem: f1011000-f101101f : mv64xxx_i2c.0 /proc/iomem: f1011000-f101101f : mv64xxx_i2c.0 /proc/iomem: f1012000-f10120ff : serial8250.0 /proc/iomem: f1012000-f101201f : serial /proc/iomem: f1012100-f10121ff : serial8250.1 /proc/iomem: f1012100-f101211f : serial /proc/iomem: f1020108-f102010b : orion_wdt /proc/iomem: f1020300-f1020303 : orion_wdt /proc/iomem: f1030000-f103ffff : regs /proc/iomem: f1050000-f1050fff : orion-ehci.0 /proc/iomem: f1050000-f1050fff : orion-ehci.0 /proc/iomem: f1060800-f10608ff : xor 0 low /proc/iomem: f1060900-f10609ff : xor 1 low /proc/iomem: f1060a00-f1060aff : xor 0 high /proc/iomem: f1060b00-f1060bff : xor 1 high /proc/iomem: f1072000-f1075fff : ge00 base /proc/iomem: f1072004-f1072087 : ge00 mvmdio base /proc/iomem: f1080000-f1084fff : sata base /proc/iomem: f5000000-f50007ff : sram /proc/interrupts: CPU0 /proc/interrupts: 1: 2112997 orion_irq orion_tick /proc/interrupts: 5: 2 orion_irq mv_xor.0 /proc/interrupts: 6: 2 orion_irq mv_xor.0 /proc/interrupts: 7: 2 orion_irq mv_xor.1 /proc/interrupts: 8: 2 orion_irq mv_xor.1 /proc/interrupts: 11: 134427 orion_irq eth0 /proc/interrupts: 19: 441268 orion_irq ehci_hcd:usb1 /proc/interrupts: 21: 1996 orion_irq sata_mv /proc/interrupts: 29: 103 orion_irq mv64xxx_i2c /proc/interrupts: 33: 755 orion_irq serial /proc/interrupts: 34: 7 orion_irq /proc/interrupts: 46: 14213 orion_irq orion-mdio /proc/interrupts: 79: 1 orion_gpio0 79 USB Copy /proc/interrupts: 80: 0 orion_gpio0 80 Reset /proc/interrupts: Err: 0 /proc/meminfo: MemTotal: 253820 kB /proc/meminfo: MemFree: 60832 kB /proc/meminfo: MemAvailable: 174724 kB /proc/meminfo: Buffers: 24328 kB /proc/meminfo: Cached: 119388 kB /proc/meminfo: SwapCached: 384 kB /proc/meminfo: Active: 77820 kB /proc/meminfo: Inactive: 83408 kB /proc/meminfo: Active(anon): 6320 kB /proc/meminfo: Inactive(anon): 52180 kB /proc/meminfo: Active(file): 71500 kB /proc/meminfo: Inactive(file): 31228 kB /proc/meminfo: Unevictable: 0 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 253820 kB /proc/meminfo: LowFree: 60832 kB /proc/meminfo: SwapTotal: 2047996 kB /proc/meminfo: SwapFree: 2031672 kB /proc/meminfo: Dirty: 1040 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 17176 kB /proc/meminfo: Mapped: 3276 kB /proc/meminfo: Shmem: 40988 kB /proc/meminfo: Slab: 23676 kB /proc/meminfo: SReclaimable: 19084 kB /proc/meminfo: SUnreclaim: 4592 kB /proc/meminfo: KernelStack: 584 kB /proc/meminfo: PageTables: 480 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 2174904 kB /proc/meminfo: Committed_AS: 80872 kB /proc/meminfo: VmallocTotal: 761856 kB /proc/meminfo: VmallocUsed: 7424 kB /proc/meminfo: VmallocChunk: 749636 kB /proc/bus/input/devices: I: Bus=0019 Vendor=0001 Product=0001 Version=0100 /proc/bus/input/devices: N: Name="gpio-keys" /proc/bus/input/devices: P: Phys=gpio-keys/input0 /proc/bus/input/devices: S: Sysfs=/devices/platform/gpio-keys/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd event0 /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=3 /proc/bus/input/devices: B: KEY=1000000 0 0 0 0 0 0 0 20 0 0 0 0 /proc/bus/input/devices: -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (500, 'testing') Architecture: armel (armv5tel) Kernel: Linux 3.16.0-4-kirkwood Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150421190057.16426.9144.reportbug@nas3c3b5d
