Package: installation-reports
Boot method: ISO Image version: http://cdimage.debian.org/cdimage/jessie_di_rc1/amd64/iso-cd/debian-jessie-D I-rc1-amd64-netinst.iso Date: 31/01/2015 Machine: VM (esx 4.1) Processor: 2 Memory: 2G Partitions: not arrived to this point Output of lspci -knn (or lspci -nn): links to screens with output: https://www.dropbox.com/s/662jzguws6ikt39/Zrzut%20ekranu%202015-01-31%2020.4 4.04.png?dl=0 https://www.dropbox.com/s/nn5ebckfid3ibxc/Zrzut%20ekranu%202015-01-31%2020.4 4.48.png?dl=0 https://www.dropbox.com/s/4uvf48pt407qpxc/Zrzut%20ekranu%202015-01-31%2020.4 4.55.png?dl=0 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [OK] Detect network card: [OK] Configure network: [E ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: Installer is trying to get ip from dhcp, then he ask me about dns servers, hostname, domain name, and on next step, where he should inform me about problem with getting address from dhcp and propose to setup it manually, he shows only blue screen with grey line in bottom. Ctrl+c restart network configuration procedure but he always stuck in the same step. In network where I notice this problem I have no DHCP server for IP version v4, but IPv6 autoconfig works (without dns). I try in vlan where ipv6 autoconfig is disabled, this problem does not exists.
