On 2014-12-14, Karsten Merker wrote: > based on your installation report, I have just added the > Wandboard Quad to the list of supported systems in the > installation guide.
Great! > Could you perhaps give a short list of which hardware components > are working with Debian's kernel, so that I can add that to the > installation guide as well? I understand from your installation > report that MMC, LAN, USB and HDMI video work. Yes, those all work. > The module list > shows modules loaded for SATA and WLAN, but I cannot assess from > the module list whether these actually work correctly (on some > systems there can be be issues with GPIO-controlled regulators > for the SATA power or a requirement for OOB communication to the > SDIO WLAN module), so I would appreciate an explicit > confirmation. I haven't succesfully tested WLAN. It requires firmware as well as an additional configuration file alongside the firmware. I've tried using the files from https://github.com/xypron/wandboard-bcm4329 unsuccessfully. SATA is working for me running the 3.16 kernel from jessie on a wheezy system, so I *suspect* it will work fine on a purely jessie system, but haven't actually tested it. > Besides these, do the following components work? > - Serial Console Works. console=ttymxc0,115200 > - Audio (HDMI, analog, S/PDIF) I don't believe HDMI audio has kernel support yet. Analog may require firmware not present in Debian; I have yet to get it to work. S/PDIF also may require additional firmware; I don't have S/PDIF hardware to verify. > - USB OTG Unconfirmed. Haven't tried much. > - Bluetooth Haven't gotten it to work. I believe it requires the same firmware as WLAN, and possibly additional configuration. live well, vagrant
signature.asc
Description: PGP signature
