Op 08-12-14 om 22:46 schreef Geert Stappers:
Okay.
This is from the original posting:
I went into chroot /target and installed aptitude, the kernel and
grup-pc, but grub-install failed, because of no devices present.
My guess is that in the chroot the mount command will *not* show
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=62683,mode=755)
devpts on /dev/pts type devpts
(rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
My advices is to exit the chroot, mount at least /dev in /target/dev
and re-enter the /target chroot.
Unfortunately, i removed /target/* so i had a clean startpoint.
But now the partitioner fails to end (or fails to show a dialog) so i
can't get anything on target again.
I have to kill the process, because on terminal 1 no dialog is shown.
See the last lines of the log of partman:
/bin/partman: *******************************************************
/lib/partman/init.d/25md-devices:
*******************************************************
/lib/partman/init.d/30parted:
*******************************************************
/lib/partman/init.d/35dump:
*******************************************************
/lib/partman/init.d/49md:
*******************************************************
/lib/partman/init.d/50biosgrub:
*******************************************************
/lib/partman/init.d/50lvm:
*******************************************************
/lib/partman/init.d/50lvm:
*******************************************************
/lib/partman/init.d/52crypto:
*******************************************************
/lib/partman/init.d/70update_partitions:
*******************************************************
/lib/partman/init.d/80autouse_swap:
*******************************************************
/lib/partman/display.d/10initial_auto:
*******************************************************
/lib/partman/display.d/50initial_auto_raid:
*******************************************************
/lib/partman/display.d/55initial_auto_raid_fs:
*******************************************************
/lib/partman/display.d/80manual_partitioning:
*******************************************************
/lib/partman/choose_partition/20auto/choices:
*******************************************************
/lib/partman/choose_partition/25md/choices:
*******************************************************
/lib/partman/choose_partition/30lvm/choices:
*******************************************************
/lib/partman/choose_partition/35crypto/choices:
*******************************************************
/lib/partman/choose_partition/60partition_tree/choices:
*******************************************************
/lib/partman/undo.d/30parted:
*******************************************************
How can i get a minimal working target again (with apt-get installed)?
FYI, I have access to usb and wget to get extra files if needed.
Regards,
Michiel
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/5486bc80.6030...@gmail.com
