On Sun, Jul 13, 2014 at 12:26 PM, Bastien ROUCARIES <roucaries.bast...@gmail.com> wrote: > On Sun, Jul 13, 2014 at 9:39 AM, Ian Campbell <i...@hellion.org.uk> wrote: >> On Sun, 2014-07-13 at 00:58 +0200, Bastien ROUCARIES wrote: >>> On Sun, Jul 13, 2014 at 12:14 AM, Martin Michlmayr <t...@cyrius.com> wrote: >>> > * Bastien ROUCARIES <roucaries.bast...@gmail.com> [2014-07-12 19:05]: >>> >> Hi UImage is too big to get into mtd :S You said that it it is a >>> >> trimmed down version ? Any idea to trim more ? >>> > >>> > I believe we said the initramfs generated by initramfs-tools is >>> > trimmed down. How big is the uimage and how much space do you have? >>> >>> 5242880 byte or 5M >> >> The kirkwood kernel is just under 2MB, so there's no way the uImage >> could be 5M. This is enforced at kernel build time see >> linux/debian/config/armel/defines which has: >> [kirkwood_image] >> recommends: uboot-mkimage >> # SheevaPlug: 4194304 - 8 - 64 = 4194232 >> # QNAP TS-119/TS-219: 2097152 - 8 - 64 = 2097080 >> check-size: 2097080 >> >> Maybe we are talking about uInitrd/uRamdisk? > > Yes it is uInitrd >>> >> BTW it seems that this config need a serial console in order to set >>> >> ssh password. Do you have pointer about documentation of how to set it >>> >> without serial. I plan to document dns-320 on the wiki. >>> > >>> > Take a look at oldsys-preseed. You could just generate a dummy stanza >>> > that will do DHCP with a fallback IP address (instead of actually >>> > reading the network config from the device). >> >> I always thought that this was the default behaviour of the >> network-console flavour images, is it not? > > No it is not. It ask for hostaname and password for ssh > > Bastien >> Ian. >> Ping
-- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/cae2spay2bobjrkhczcb5podi4dczsmxplxxqlsd2id6o3qz...@mail.gmail.com
