Package: flash-kernel
Version: 3.3
Severity: serious
Hi!
Overriding the RootFS device for the initramfs doesn't seem to
work. Might well also be a bug in initramfs-tools. Setting serious
because it prevents this system from booting, feel free to change.
[ 17.714542] IP-Config: eth0 hardware address 00:08:9b:d1:4b:10 mtu 1500 DHCP
RARP
[ 17.714549] IP-Config: eth0 complete (dhcp from 10.70.255.1):
[ 17.714552] address: 10.42.0.6 broadcast: 10.255.255.255 netmask:
255.0.0.0
[ 17.714556] gateway: 10.130.130.130 dns0 : 172.16.0.1 dns1 :
0.0.0.0
[ 17.714559] domain : asgard
[ 17.714563] rootserver: 10.42.23.2 rootpath:
[ 17.714566] filename : F_TS-419P2+
[ 17.728125] Begin: Assembling all MD arrays ...
[ 17.776829] md: md0 stopped.
[ 17.786608] md: bind<sdb1>
[ 17.786976] md: bind<sdc1>
[ 17.787305] md: bind<sdd1>
[ 17.787987] md: bind<sda1>
[ 17.981071] raid6: int32x1 122 MB/s
[ 18.151049] raid6: int32x2 192 MB/s
[ 18.321192] raid6: int32x4 200 MB/s
[ 18.491240] raid6: int32x8 254 MB/s
[ 18.491265] raid6: using algorithm int32x8 (254 MB/s)
[ 18.494632] async_tx: api initialized (async)
[ 18.495755] xor: measuring software checksum speed
[ 18.541021] arm4regs : 1810.400 MB/sec
[ 18.591022] 8regs : 1086.000 MB/sec
[ 18.641019] 32regs : 1503.600 MB/sec
[ 18.641042] xor: using function: arm4regs (1810.400 MB/sec)
[ 18.667005] md: raid6 personality registered for level 6
[ 18.667054] md: raid5 personality registered for level 5
[ 18.667073] md: raid4 personality registered for level 4
[ 18.667836] bio: create slab <bio-1> at 1
[ 18.667889] md/raid:md0: not clean -- starting background reconstruction
[ 18.667926] md/raid:md0: device sda1 operational as raid disk 0
[ 18.667950] md/raid:md0: device sdd1 operational as raid disk 3
[ 18.667972] md/raid:md0: device sdc1 operational as raid disk 2
[ 18.667992] md/raid:md0: device sdb1 operational as raid disk 1
[ 18.668728] md/raid:md0: allocated 4218kB
[ 18.668834] md/raid:md0: raid level 5 active with 4 out of 4 devices,
algorithm 2
[ 18.668983] md0: detected capacity change from 0 to 6000789159936
[ 18.669072] mdadm: /dev/md/0 has been started with 4 drives.
[ 18.685574] md0: unknown partition table
[ 18.869802] Success: assembled all arrays.
[ 18.869948] done.
[ 18.871347] + [ -e /conf/param.conf ]
[ 18.871682] + . /conf/param.conf
[ 18.871914] + ROOT=/dev/mapper/root-root
[ 18.872071] + debug=y
[ 18.872208] + rootdelay=2
[ 18.872366] + /scripts/local-top/lvm2
[ 18.882717] device-mapper: uevent: version 1.0.3
[ 18.883977] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 18.922123] Volume group "root" not found
[ 18.922443] Skipping volume group root
[ 18.923555] Unable to find LVM volume root/root
[ 18.924038] + [ -e /conf/param.conf ]
[ 18.924365] + . /conf/param.conf
[ 18.924596] + ROOT=/dev/mapper/root-root
[ 18.924752] + debug=y
[ 18.924889] + rootdelay=2
[ 18.925046] + /scripts/local-top/cryptroot
[ 18.959385] Unlocking the disk
/dev/disk/by-uuid/b55ee1d9-d00e-42c4-946c-a4d85e169d3b (md0_crypt)
[ 18.959467] Enter passphrase: [ 26.957381] Reading all physical volumes.
This may take a while...
[ 26.971742] Found volume group "root" using metadata type lvm2
[ 27.038792] 1 logical volume(s) in volume group "root" now active
[ 28.453053] /scripts/local-top/cryptroot: line 1: can't open /dev/ram: no
such file
[ 28.453760] cryptsetup: md0_crypt set up successfully
[ 28.458560] + [ -e /conf/param.conf ]
[ 28.458905] + . /conf/param.conf
[ 28.459138] + ROOT=/dev/mapper/root-root
[ 28.459293] + debug=y
[ 28.459430] + rootdelay=2
[ 28.459566] + ROOT=/dev/ram
[ 28.459749] + [ n != y ]
[ 28.460065] + log_end_msg
[ 28.460194] + _log_msg done.\n
[ 28.460374] + [ n = y ]
[ 28.460684] + printf done.\n
[ 28.460832] done.
[ 28.460892] + wait_for_udev 10
[ 28.461121] + command -v udevadm
[ 28.461408] + udevadm settle --timeout=10
[ 28.465738] + [ -n ]
[ 28.466096] + [ /ram = /dev/ram ]
[ 28.466429] + [ ! -e /dev/ram ]
[ 28.466765] + log_begin_msg Waiting for root file system
[ 28.466958] + _log_msg Begin: Waiting for root file system ...
[ 28.467149] + [ n = y ]
[ 28.467469] + printf Begin: Waiting for root file system ...
[ 28.467623] Begin: Waiting for root file system ... + slumber=2
[ 28.467868] + slumber=20
[ 28.468017] + [ ! -e /dev/ram ]
[ 28.468337] + /bin/sleep 0.1
[ 28.570103] + slumber=19
[ 28.570297] + [ 19 -gt 0 ]
[ 28.570654] + [ ! -e /dev/ram ]
[ 28.570988] + /bin/sleep 0.1
[ 28.672723] + slumber=18
[ 28.672912] + [ 18 -gt 0 ]
[ 28.673252] + [ ! -e /dev/ram ]
[ 28.673579] + /bin/sleep 0.1
[ 28.775280] + slumber=17
[ 28.775468] + [ 17 -gt 0 ]
[ 28.775805] + [ ! -e /dev/ram ]
[ 28.776141] + /bin/sleep 0.1
[ 28.877808] + slumber=16
[ 28.877998] + [ 16 -gt 0 ]
[ 28.878335] + [ ! -e /dev/ram ]
[ 28.878678] + /bin/sleep 0.1
[ 28.980349] + slumber=15
[ 28.980538] + [ 15 -gt 0 ]
[ 28.980876] + [ ! -e /dev/ram ]
[ 28.981239] + /bin/sleep 0.1
[ 29.082903] + slumber=14
[ 29.083090] + [ 14 -gt 0 ]
[ 29.083430] + [ ! -e /dev/ram ]
[ 29.083769] + /bin/sleep 0.1
[ 29.185442] + slumber=13
[ 29.185633] + [ 13 -gt 0 ]
[ 29.185977] + [ ! -e /dev/ram ]
[ 29.186315] + /bin/sleep 0.1
[ 29.287976] + slumber=12
[ 29.288162] + [ 12 -gt 0 ]
[ 29.288497] + [ ! -e /dev/ram ]
[ 29.288835] + /bin/sleep 0.1
[ 29.390511] + slumber=11
[ 29.390698] + [ 11 -gt 0 ]
[ 29.391066] + [ ! -e /dev/ram ]
[ 29.391399] + /bin/sleep 0.1
[ 29.493045] + slumber=10
[ 29.493238] + [ 10 -gt 0 ]
[ 29.493575] + [ ! -e /dev/ram ]
[ 29.493914] + /bin/sleep 0.1
[ 29.595577] + slumber=9
[ 29.595763] + [ 9 -gt 0 ]
[ 29.596103] + [ ! -e /dev/ram ]
[ 29.596441] + /bin/sleep 0.1
[ 29.698122] + slumber=8
[ 29.698314] + [ 8 -gt 0 ]
[ 29.698651] + [ ! -e /dev/ram ]
[ 29.698993] + /bin/sleep 0.1
[ 29.800691] + slumber=7
[ 29.800882] + [ 7 -gt 0 ]
[ 29.801242] + [ ! -e /dev/ram ]
[ 29.801583] + /bin/sleep 0.1
[ 29.903261] + slumber=6
[ 29.903451] + [ 6 -gt 0 ]
[ 29.903790] + [ ! -e /dev/ram ]
[ 29.904129] + /bin/sleep 0.1
[ 30.005795] + slumber=5
[ 30.005982] + [ 5 -gt 0 ]
[ 30.006319] + [ ! -e /dev/ram ]
[ 30.006661] + /bin/sleep 0.1
[ 30.108320] + slumber=4
[ 30.108509] + [ 4 -gt 0 ]
[ 30.108848] + [ ! -e /dev/ram ]
[ 30.109185] + /bin/sleep 0.1
[ 30.210854] + slumber=3
[ 30.211062] + [ 3 -gt 0 ]
[ 30.211404] + [ ! -e /dev/ram ]
[ 30.211728] + /bin/sleep 0.1
[ 30.313385] + slumber=2
[ 30.313571] + [ 2 -gt 0 ]
[ 30.313908] + [ ! -e /dev/ram ]
[ 30.314244] + /bin/sleep 0.1
[ 30.415913] + slumber=1
[ 30.416102] + [ 1 -gt 0 ]
[ 30.416442] + [ ! -e /dev/ram ]
[ 30.416784] + /bin/sleep 0.1
[ 30.518439] + slumber=0
[ 30.518629] + [ 0 -gt 0 ]
[ 30.518956] + break
[ 30.519107] + [ 0 -gt 0 ]
[ 30.519434] + log_end_msg 1
[ 30.519612] + _log_msg done.\n
[ 30.519795] + [ n = y ]
[ 30.520108] + printf done.\n
[ 30.520259] done.
[ 30.520329] + [ ! -e /dev/ram ]
[ 30.520671] + echo Gave up waiting for root device. Common problems:
[ 30.520824] Gave up waiting for root device. Common problems:
[ 30.520888] + echo - Boot args (cat /proc/cmdline)
[ 30.521056] - Boot args (cat /proc/cmdline)
[ 30.521129] + echo - Check rootdelay= (did the system wait long enough?)
[ 30.521281] - Check rootdelay= (did the system wait long enough?)
[ 30.521354] + echo - Check root= (did the system wait for the right
device?)
[ 30.521508] - Check root= (did the system wait for the right device?)
[ 30.521574] + echo - Missing modules (cat /proc/modules; ls /dev)
[ 30.521720] - Missing modules (cat /proc/modules; ls /dev)
[ 30.521788] + panic ALERT! /dev/ram does not exist. Dropping to a shell!
[ 30.522005] + command -v chvt
[ 30.522243] + chvt 1
[ 30.524437] + echo ALERT! /dev/ram does not exist. Dropping to a shell!
[ 30.524650] ALERT! /dev/ram does not exist. Dropping to a shell!
[ 30.524736] + [ -n ]
[ 30.525018] + modprobe -v i8042
[ 30.528594] modprobe: module i8042 not found in modules.dep
[ 30.528875] + true
[ 30.529058] + modprobe -v atkbd
[ 30.531966] + modprobe -v ehci-hcd
[ 30.535580] modprobe: module ehci-hcd not found in modules.dep
[ 30.535854] + true
[ 30.536031] + modprobe -v uhci-hcd
[ 30.539640] modprobe: module uhci-hcd not found in modules.dep
[ 30.539916] + true
[ 30.540100] + modprobe -v ohci-hcd
[ 30.543704] modprobe: module ohci-hcd not found in modules.dep
[ 30.543977] + true
[ 30.544157] + modprobe -v usbhid
[ 30.547765] modprobe: module usbhid not found in modules.dep
[ 30.548045] + true
[ 30.548283] + REASON=ALERT! /dev/ram does not exist. Dropping to a shell!
PS1=(initramfs) /bin/sh -i
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.4-trunk-amd64 (SMP w/6 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20130509202213.613.49137.report...@hepworth.siccegge.de
