Le Fri, Mar 22, 2013 at 07:42:26PM +0100, Martin Lucina a écrit : > > Anyhow, my question / offer to help is: AFAICS at the moment there is no > real documentation on how joe user can install wheezy on their Dreamplug > using d-i, or if there is I haven't found it. > > In my case, being vaguely familiar with U-boot (and having just flashed > U-boot 2013.01.01 on the plug), I followed these steps: > > 1. Download uImage and uInitrd from [1]. > > http://ftp.nl.debian.org/debian/dists/testing/main/installer-armel/current/images/. > 2. Copy both to a (FAT-formatted) USB stick. > 3. Boot into U-boot, stop the autoboot and run the following commands: > > usb start > usb tree > [determine, using "fatls" etc, which device is the usb stick] > setenv bootargs console=ttyS0,115200 > fatload usb 2:1 0x6400000 uImage > fatload usb 2:1 0x8000000 uInitrd > bootm 0x6400000 0x8000000 > > Who can I contact about getting these steps into the wheezy installation > guide in some prominent place?
Dear Martin, thanks for your input. The installation guide is packaged, so you can make your suggestion and send a patch through a bug report against the "installation-guide" package (which will be received on the "debian-boot" mailing list). As you figured out by yourself, the "debian-arm" mailing list is also a good place for discussing the additions that you propose. Have a nice week-end, -- Charles Plessy Tsurumi, Kanagawa, Japan -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130323001744.ga30...@falafel.plessy.net
