Package: installation-reports Boot method: Flash drive Image version: Release 1, wheezy installer Date: 2012 Feb 21
Machine: Dell T5600 Processor: Memory:32G Partitions: <df -Tl will do; the raw partition table is preferred> Output of lspci -knn (or lspci -nn): Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: I wanted to install a Raid 1 system with 2 active disks and one missing spare. After selecting no partition for the spare, no MD drive was created but I was back at the create raid prompt. I got around this by using a recovery disk to create the md drive before starting the install. --As an additional problem, the entire install failed in that the new system would hang during the boot (Someting after usb discovery) -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/5127950f.2080...@ll.mit.edu
