Thank you, it works! To give those parameter "console=ttyS0,38400 video=off" to
the Kernel I added a new label in the menu where I could choose the normal or
the expert installation. I have done that in the file
/path-to-tftp-share/debian-installer/i386/boot-screens/adtxt.cfg with those
lines:
-------------------------------------------------
label auto
menu label ^Serial Install
kernel debian-installer/i386/linux
append priority=low console=ttyS0,38400 video=off
initrd=debian-installer/i386/initrd.gz --
-------------------------------------------------
When I now choose "Serial Install" the kernel boots without video mode, and I
can complete the installation.
Jonas
_________________________
Jonas Meier
MSW Informatikdienste
jonas.me...@msw.ch
>>> "Lennart Sorensen" <lsore...@csclub.uwaterloo.ca> Donnerstag, 30. August
>>> 2012 >>>
On Thu, Aug 30, 2012 at 11:35:23AM +0200, Jonas Meier wrote:
> dear list
>
> I want to install Debian Squeeze on a Alix 2d2
> (http://www.pcengines.ch/alix2d2.htm). This little Box only boots from a
> CF-Card or PXE and can only be managed over a serial interface.
>
> So I installed tfpd-hpa on an other server, downloaded the Debian Netboot
> from
> (ftp://ftp.ch.debian.org/debian/dists/squeeze/main/installer-i386/current/images/netboot/)
> and configured the daemon. In "pxelinux.cfg/default" I added the line
> "serial 0 38400". Now when I started the Alix board and booted it over PXE I
> came to the menu, where I could choose the normal or the expert installation.
> No matter which one I choose, I always had the error "Undefined video mode
> number: 314". Here a copy of the output:
> -------------------------
> Loading debian-installer/i386/linux.....
> Loading debian-installer/i386/initrd.gz.........ready.
> Probing EDD (edd=off to disable)... ok
> Undefined video mode number: 314
> Press <ENTER> to see video modes available, <SPACE> to continue, or wait 30
> sec
> Mode: Resolution: Type: ER to boot or TAB to edit a menu entry
> 0 F00 80x25 CGA/MDA/HGC
> -------------------------
> It doesn't matter what I do, nothing happens. How can I define that it should
> use again the serial console and not an other video mode?
If it doesn't have video but only serial, then you probably have to pass
an option to the kernel when booting to disable the normal video.
Something like:
console=ttyS0,38400 video=off
I didn't look them up to check that I remembered them right.
--
Len Sorensen
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20120830145506.gt1...@csclub.uwaterloo.ca
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/5040def20200001e0000b...@gwia.msw.ch
