Package: installation-reports
Boot method: Netinst CD
Image version: Wheezy alpha1 kfreebsd-i386 netinst CD
Date: 2012-05-18
Machine: VirtualBox 3.2.10_OSE r66523
Processor: virtual Intel T2400 1.83GHz 1-Core CPU
Memory: 512 MB
Partitions: UFS partition for root + swap
# fdisk /dev/ad4
last_lba(): I don't know how to handle files with mode 20660
You will not be able to write the partition table.
Command (m for help): p
Disk /dev/ad4: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors
Units = cylinders of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e411b
Device Boot Start End Blocks Id System
/dev/ad4p1 * 2048 15988735 7993344 a5 FreeBSD
/dev/ad4p2 15990782 16775167 392193 5 Extended
/dev/ad4p5 15990784 16775167 392192 82 Linux swap /
Solaris
Output of lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma]
[8086:1237] (rev 02)
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton
II] [8086:7000]
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01)
00:02.0 VGA compatible controller [0300]: Innotek Systemberatung GmbH
VirtualBox Graphics Adapter [80ee:beef]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet
Controller [8086:100e] (rev 02)
00:04.0 System peripheral [0880]: Innotek Systemberatung GmbH VirtualBox Guest
Service [80ee:cafe]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97
Audio Controller [8086:2415] (rev 01)
00:06.0 USB Controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f]
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 08)
00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E)
SATA Controller [AHCI mode] [8086:2829] (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [0]
Install boot loader: [O]
Overall install: [0]
Comments/Problems:
- Installation went mostly fine!
- I used one UFS filesystem for root-partition, no other
partitions beside swap.
- I couldn't get a german keyboard layout, neither in the
installation, nor in the installed system.
- Kernel 8.3 was installed.
- I installed without internet access from netinst CD, thus only
the "Standard system tools" task was installed, so no X.
- The installed system boots fine. But english keyboard layout on the
console.
- If I manage to transfer the installation logs from the VirtualBox
system, I will post it here afterwards.
Thanks
Holger
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Powered by Sylpheed 3.0.2 under
Debian GNU / / _ _ _ _ _ __ __
/ /__ / / / \// //_// \ \/ /
/____/ /_/ /_/\/ /___/ /_/\_\ 6.0 / Squeeze.
Registered LinuxUser #311290 - http://counter.li.org/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20120518225805.80713371.li...@wansing-online.de
