Package: installation-reports Boot method: <USB> Image version: <Full URL to image you downloaded is best> Date: <Wed May 4 2011 about noon>
Machine: <ASUS M4A89/USB3 Pro - 12GB RAM - AMD Phenom II quad core - ASUS EAH5850 graphics> Processor:AMD Phenom II quad core SN 9213227D90014 Memory:3 x 4GB DDR3 Kingston KHX1600C9D3K3/12GX Partitions: <2gb boot, 4gb swap, 63gb root> Output of lspci -knn (or lspci -nn): 00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11] (rev 02) 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] 00:04.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] 00:05.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) [1002:5a1b] 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (rev 40) 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41) 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40) 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40) 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] 00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] 00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] 02:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 04:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01) 05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02) 05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02) 06:00.0 VGA compatible controller [0300]: ATI Technologies Inc Cypress [Radeon HD 5800 Series] [1002:6899] 06:00.1 Audio device [0403]: ATI Technologies Inc Cypress HDMI Audio [Radeon HD 5800 Series] [1002:aa50] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: NIC install was incomplete. Motherboard is ASUS M4A89 series with on-board NIC (Realtek 8111e). Still, it initiated with the install. It saw my home network and router, but not beyond - but it DID manage to find the Debian website (NOT the pages in the install). DNS lookups failed, but if a TCP address was entered, the site would be found (lookup takes a while though). Traceroute to Google shows: 2 98.67.134.1 adsl-98-67-139-1.shv.bellsouth.net 10 12.123.153.18 crl.attga.ip.att.net 16 * * 17 * * 18 74.125.47.103 yw-in-f103.1e100.net and it takes more than 5 min for Traceroute to finish (each server rectifies very slowly). Other computers on the home network have no problems - we are about 100' from a DSL node. The ifconfig command appears not to work (at least, not in a bash shell). The GUI network administration tool does NOT have an eth0 (or any NIC) tab - only General, DNS, and Hosts. dmesg: [ 1.599444] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.599453] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.599463] alloc irq_desc for 51 on node 0 [ 1.599464] alloc kstat_irqs on node 0 [ 1.599466] r8169 0000:03:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 [ 1.599500] r8169 0000:03:00.0: setting latency timer to 64 [ 1.599503] r8169 0000:03:00.0: unknown MAC, using family default [ 1.599537] alloc irq_desc for 61 on node 0 [ 1.599538] alloc kstat_irqs on node 0 [ 1.599547] r8169 0000:03:00.0: irq 61 for MSI/MSI-X [ 1.599934] eth0: RTL8168b/8111b at 0xffffc9000187e000, bc:ae:c5:8b:85:17, XID 0c200000 IRQ 61 Note that the manufacturer board NIC spec is not the same as what dmesg and lspci -nn found Also, I had to disconnect the RAID array because the installer put Linux on it without giving me an option to place it on the un-arrayed drive (which has to be on SATA 5 or 6, since those are IDE compatible and slower). ----- Fight back spam! Download the Blue Frog. http://www.bluesecurity.com/register/s?user=c2VyZWJyZW4%3D
