A Terça 22 Fevereiro 2011 07:46:05 mplia mpliaaa você escreveu: > Package: Debian-Installer > Version: 6.0 > > Description: By default, the Squeeze installer uses mdadm metablock version > 1.2 when it creates a new raid-0 array. This results in grub not being able > to install, since there's obviously an incompatibility between grub and > this new metablock version. A workaround on this issue is to boot via a > livecd and build the array using the --metablock=0.90 parameter on mdadm. > Then reboot with debian and install squeeze on this pre-made array (grub > installs properly). > Solution: see above. Perhaps the squeeze installer should use the > --metablock=0.90 parameter by default?
grub-pc installed was: 1.98+20100804-14. This is what happened when i tried to install with RAID0: Mar 8 09:43:52 grub-installer: info: Installing grub on '/dev/sda' Mar 8 09:43:52 grub-installer: info: grub-install supports --no-floppy Mar 8 09:43:52 grub-installer: info: Running chroot /target grub-install -- no-floppy --force "/dev/sda" Mar 8 09:43:53 grub-installer: /usr/sbin/grub-probe: error: unknown filesystem. Mar 8 09:43:53 grub-installer: Auto-detection of a filesystem of /dev/md0 failed. Mar 8 09:43:53 grub-installer: Please report this together with the output of "/usr/sbin/grub-probe --device-map=/boot/grub/device.map --target=fs -v /boot/grub" to <bug-g...@gnu.org> Mar 8 09:43:53 grub-installer: error: Running 'grub-install --no-floppy -- force "/dev/sda"' failed. ...but i did another installation with RAID1 and it was sucessfull and the system boots. It is also using version 1.2 as in the previous installation in RAID0. -- Melhores cumprimentos/Best regards, Miguel Figueiredo http://www.DebianPT.org
<<attachment: gruberror.png>>
