Your message dated Sun, 06 Feb 2011 09:38:54 +0000
with message-id <e1pm154-00027y...@franck.debian.org>
and subject line Bug#414117: fixed in netcfg 1.60
has caused the Debian Bug report #414117,
regarding netcfg doesn't wait long enough to detect link
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
414117: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=414117
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Boot method: CD, with the command 'install'
Image version: Netinst daily image
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso, version 20070211-2.iso
md5sum: 045f122cd20090fca10772c72f61ab57
Date: 2007-02-12
Machine: Dell PowerEdge 1950
Dual Xeon CPUs, dual SATA hdd, no raid controller
Partitions:
System is configured with two identical disks in (software) RAID1
The first partition is /, is an ext3 partition.
The remainder is an LVM volume, with is sliced up further
# df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/md0 ext3 482090 102625 354573 23% /
tmpfs tmpfs 1038312 0 1038312 0% /lib/init/rw
udev tmpfs 10240 92 10148 1% /dev
tmpfs tmpfs 1038312 4 1038308 1% /dev/shm
/dev/mapper/vg00-local
ext3 2064208 68680 1890672 4% /local
/dev/mapper/vg00-mysql
ext3 10321208 154236 9642684 2% /srv/mysql
/dev/mapper/vg00-svn
ext3 154818540 192072 146762148 1% /srv/svn
/dev/mapper/vg00-tmp
ext3 1032088 36580 943080 4% /tmp
/dev/mapper/vg00-usr
ext3 6192704 1535244 4342888 27% /usr
/dev/mapper/vg00-var
ext3 4128448 299216 3619520 8% /var
/dev/mapper/vg00-www--logs
ext3 10321208 154244 9642676 2% /var/log/apache2
/dev/mapper/vg00-vhosts
ext3 10321208 154236 9642684 2% /var/www/vhosts
raw partition table:
# sfdisk -l /dev/sda
Disk /dev/sda: 30394 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sda1 0+ 61 62- 497983+ fd Linux raid autodetect
/dev/sda2 62 30393 30332 243641790 fd Linux raid autodetect
/dev/sda3 0 - 0 0 0 Empty
/dev/sda4 0 - 0 0 0 Empty
same for /dev/sdb
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [e]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Install base system: [o]
Clock/timezone setup: [o]
User/password setup: [o]
Install tasks: [o]
Install boot loader: [o]
Overall install: [o]
Comments/Problems:
System has two ethernet interfaces. Same type of device, just different MACs.
The installer consistently picked the "wrong" interface during installation -
i.e. the one that was not plugged in.
I tried a couple of i386 netinst installs, and one using the amd64 netinst.
Behaviour was consistent in all these cases.
I did try moving the ethernet cable to the other interface at the network
configuration stage, and got link-up messages etc. I moved it back to
complete the install because I was looking for further problems precipiated
by this. This is likely the well-known problem with udev, and might be fixed
by the udev rules described in debian bugs #403706 and #405775.
I haven't tried this yet.
I answered 'no' to the "use network mirror" during apt-setup-udeb.
At the tasksel stage I selected "standard system" which added 9 packages.
On one occasion there was a hang while these packages were being copied from
the cdrom and installed. There was an error message from
apt-setup/generators/50mirror, and while all the dialogs indicated all the
packages were copied, it got stuck after or during the 6th.
However I was unable to reproduce this.
udev continues to give problems with disk renumbering; I would install
to a disk detected as /dev/sdb and reboot and the disk would now be named
/dev/sda. This needs to be documented in the release notes; its a
significantly different behaviour from sarge.
I worked around this issue by putting the disks into an mdadm raid set;
this uses uuids to identify disks unambigously for udev and I get to use
reasonably short device names in /etc/fstab. I decided to use LVM to give
me flexibility in resizing partitions after installation (and multiple
partitions are a pain).
The installer's default choices for this were reasonable but I dislike
having /boot as a separate partition; I would rather have all of / and
put /usr, /var /home and so on in separate partitions.
I followed (approximately) the paritioning and disk setup described by
http://dev.jerryweb.org/raid/ - I changed my mind several times about
the layout and redid it completely a number of times; partman soaked up
the punishment admirably.
The mdadm system for controlling the raid mirror also works well.
After installation, I was able to fail a disk, remove it and hot-add it back
with no problem.
I was also able to boot the system if the second disk was unplugged.
I could not boot with the first disk unplugged, this is a BIOS limitation.
Looking good!
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
hardware-summary.pe1950.gz
Description: Binary data
--- End Message ---
--- Begin Message ---
Source: netcfg
Source-Version: 1.60
We believe that the bug you reported is fixed in the latest version of
netcfg, which is due to be installed in the Debian FTP archive:
netcfg-static_1.60_i386.udeb
to main/n/netcfg/netcfg-static_1.60_i386.udeb
netcfg_1.60.dsc
to main/n/netcfg/netcfg_1.60.dsc
netcfg_1.60.tar.gz
to main/n/netcfg/netcfg_1.60.tar.gz
netcfg_1.60_i386.udeb
to main/n/netcfg/netcfg_1.60_i386.udeb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 414...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Matt Palmer <mpal...@debian.org> (supplier of updated netcfg package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sun, 06 Feb 2011 12:59:07 +1100
Source: netcfg
Binary: netcfg netcfg-static
Architecture: source i386
Version: 1.60
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Matt Palmer <mpal...@debian.org>
Description:
netcfg - Configure the network (udeb)
netcfg-static - Configure a static network (udeb)
Closes: 399071 414117 496647 606515 610553
Changes:
netcfg (1.60) unstable; urgency=low
.
[ Matt Palmer ]
* Increase the frequency of DHCP discover packets sent during DHCP
configuration using udhcpc. This should ameliorate some problems with
DHCP configuration when a link is slow to become available.
Thanks to Ferenc Wagner for the patch.
* Clarify the requirements for hostnames. Closes: #399071.
* Modify ethtool-lite so that it distinguishes between "ethtool failed"
and "ethtool says link is down". This should reduce link up/link down
confusion. Closes: #496647.
* Wait for up to 3 seconds (in 0.25s increments) looking for the link on
an interface. Add a progress bar to show the progress of this
operation. Closes: #414117.
* Wait for link detection on static interface configuration.
Closes: #606515.
* Release DHCP lease at the completion of the install. Closes: #610553.
.
[ Updated translations ]
* Czech (cs.po) by Miroslav Kure
* Basque (eu.po) by Piarres Beobide
* French (fr.po) by Christian Perrier
* Kazakh (kk.po) by Baurzhan Muftakhidinov
* Nepali (ne.po)
* Russian (ru.po) by Yuri Kozlov
* Slovak (sk.po) by Ivan Masár
* Swedish (sv.po) by Daniel Nylander
* Telugu (te.po) by Arjuna Rao Chavala
* Thai (th.po) by Theppitak Karoonboonyanan
Checksums-Sha1:
150da085b3151e44ec2346dd7951b6316ffa673d 1087 netcfg_1.60.dsc
d9fc057133018d249e800046770e351fe057d8e5 426818 netcfg_1.60.tar.gz
4a3fa640810e8432ec8f6d8f9443f4e9a1fb6c2b 318010 netcfg_1.60_i386.udeb
867de966db11bd4025521b2729f61f96663e273e 243732 netcfg-static_1.60_i386.udeb
Checksums-Sha256:
acfaa16d8c649ba047758af690216ea31f28af6a943443209b4d9ae86da20472 1087
netcfg_1.60.dsc
7dcead5de32a689ff5d32f7efd851f007b9c8f74b63ea1868c4e39e642e3cb1a 426818
netcfg_1.60.tar.gz
a7b73c85a4e2c875c5f3302248df55d79458bc282999045844afce8845febf81 318010
netcfg_1.60_i386.udeb
f27a71edc33db4f8b101cc9fa062f7fd29fccddfdcf70e9810bc2e370caa5ce6 243732
netcfg-static_1.60_i386.udeb
Files:
b8e61b3bd5f10588d92117eb366ff086 1087 debian-installer optional netcfg_1.60.dsc
1bd95ab09187ce4dec5c10a939edb4cf 426818 debian-installer optional
netcfg_1.60.tar.gz
e245696aea11efe9d5f7ba89d2c70fd4 318010 debian-installer optional
netcfg_1.60_i386.udeb
9ebb07fbb04e88b68b930a199b533bc9 243732 debian-installer optional
netcfg-static_1.60_i386.udeb
Package-Type: udeb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iD8DBQFNTgSIBEnrTWk1E4cRAlp6AJ9dKlIC071ycb2mU4I8itgeU4ktUACeJLCf
CCr8i3SRTmBMqzl2jvsCr7E=
=0JEP
-----END PGP SIGNATURE-----
--- End Message ---