reassign 607906 linux-2.6
thanks
I reproduced the panic with the daily installer (first attachment). By
stopping before disk-detect and using a shell I could narrow this down
to the "modprobe mptspi" command (second attachment). It takes quite
some time to hit the BUG, which is then sooner or later followed by a
kernel panic.
However, I can't trigger the problem under "dmesg -n8": then the disks
are detected all right (third attachment).
All of this seems 100% reproducible.
Thanks,
Feri.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-29)
(b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Fri Dec 10
15:32:53 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffeb2c0 (usable)
[ 0.000000] BIOS-e820: 000000005ffeb2c0 - 000000005fff0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x5ffeb max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] RAMDISK: 5f98b000 - 5ffda59c
[ 0.000000] Allocated new RAMDISK: 00100000 - 0074f59c
[ 0.000000] Move RAMDISK from 000000005f98b000 - 000000005ffda59b to
00100000 - 0074f59b
[ 0.000000] ACPI: RSDP 000fdfc0 00014 (v00 IBM )
[ 0.000000] ACPI: RSDT 5ffeff80 00030 (v01 IBM SERONYXP 00001000 IBM
45444F43)
[ 0.000000] ACPI: FACP 5ffeff00 00074 (v01 IBM SERONYXP 00001000 IBM
45444F43)
[ 0.000000] ACPI: DSDT 5ffeb2c0 04A4E (v01 IBM SERGEODE 00001000 MSFT
0100000B)
[ 0.000000] ACPI: FACS 5ffefe00 00040
[ 0.000000] ACPI: APIC 5ffefe40 00092 (v01 IBM SERONYXP 00001000 IBM
45444F43)
[ 0.000000] ACPI: ASF! 5ffefd80 0004B (v16 IBM SERONYXP 00000001 IBM
45444F43)
[ 0.000000] 647MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0001000000 - 0001453a28] TEXT DATA BSS ==> [0001000000
- 0001453a28]
[ 0.000000] #2 [000009d400 - 0000100000] BIOS reserved ==> [000009d400
- 0000100000]
[ 0.000000] #3 [0001454000 - 000145a228] BRK ==> [0001454000
- 000145a228]
[ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000
- 0000008000]
[ 0.000000] #5 [0000100000 - 000074f59c] NEW RAMDISK ==> [0000100000
- 000074f59c]
[ 0.000000] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000
- 000000f000]
[ 0.000000] found SMP MP-table at [c009d540] 9d540
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005ffeb
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0005ffeb
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x488
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x6
ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 2/0x1
ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 3/0x7
ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 12, version 17, address 0xfec02000, GSI 32-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap:
60000000:9ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 390024
[ 0.000000] Kernel command line: DEBIAN_FRONTEND=text console=tty0
console=ttyS0,115200n8r panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005ffeb)
[ 0.000000] Memory: 1547416k/1572780k available (2337k kernel code, 24040k
reserved, 1149k data, 444k init, 663476k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1368000 - 0xc13d7000 ( 444 kB)
[ 0.000000] .data : 0xc124848f - 0xc1367c00 (1149 kB)
[ 0.000000] .text : 0xc1000000 - 0xc124848f (2337 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3059.716 MHz processor.
[ 0.012006] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6119.43 BogoMIPS (lpj=12238864)
[ 0.020016] Security Framework initialized
[ 0.024008] SELinux: Disabled at boot.
[ 0.028008] Mount-cache hash table entries: 512
[ 0.032119] Initializing cgroup subsys ns
[ 0.036007] Initializing cgroup subsys cpuacct
[ 0.040004] Initializing cgroup subsys devices
[ 0.044004] Initializing cgroup subsys freezer
[ 0.048003] Initializing cgroup subsys net_cls
[ 0.052028] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.057642] CPU: L2 cache: 512K
[ 0.060003] CPU: L3 cache: 1024K
[ 0.064012] CPU: Intel(R) Xeon(TM) CPU 3.06GHz stepping 05
[ 0.069300] Checking 'hlt' instruction... OK.
[ 0.090296] ACPI: Core revision 20090903
[ 0.101630] Enabling APIC mode: Flat. Using 3 I/O APICs
[ 0.104629] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152001] devtmpfs: initialized
[ 0.152001] regulator: core version 0.5
[ 0.152052] NET: Registered protocol family 16
[ 0.156097] EISA bus registered
[ 0.159307] ACPI: bus type pci registered
[ 0.160149] PCI: PCI BIOS revision 2.10 entry at 0xfd7dc, last bus=8
[ 0.164003] PCI: Using configuration type 1 for base access
[ 0.172242] bio: create slab <bio-0> at 0
[ 0.180186] ACPI: Interpreter enabled
[ 0.183907] ACPI: (supports S0 S4 S5)
[ 0.185014] ACPI: Using IOAPIC for interrupt routing
[ 0.192910] ACPI: No dock devices found.
[ 0.197959] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.206507] ACPI: PCI Root Bridge [PCI1] (0000:02)
[ 0.212130] ACPI: PCI Root Bridge [PCI2] (0000:04)
[ 0.217309] ACPI: PCI Root Bridge [PCI3] (0000:06)
[ 0.220103] pci 0000:06:08.0: PME# supported from D0 D3hot D3cold
[ 0.224005] pci 0000:06:08.0: PME# disabled
[ 0.228079] pci 0000:06:08.1: PME# supported from D0 D3hot D3cold
[ 0.232004] pci 0000:06:08.1: PME# disabled
[ 0.237342] ACPI: PCI Root Bridge [PCI4] (0000:08)
[ 0.240429] vgaarb: device added:
PCI:0000:00:06.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.244008] vgaarb: loaded
[ 0.248072] PCI: Using ACPI for IRQ routing
[ 0.252244] Switching to clocksource tsc
[ 0.257079] pnp: PnP ACPI init
[ 0.260221] ACPI: bus type pnp registered
[ 0.274776] pnp: PnP ACPI: found 16 devices
[ 0.279030] ACPI: ACPI bus type pnp unregistered
[ 0.283721] PnPBIOS: Disabled by ACPI PNP
[ 0.287810] system 00:01: ioport range 0x510-0x517 has been reserved
[ 0.294238] system 00:01: ioport range 0x504-0x507 has been reserved
[ 0.300659] system 00:01: ioport range 0x500-0x503 has been reserved
[ 0.307080] system 00:01: ioport range 0x420-0x427 has been reserved
[ 0.313501] system 00:01: ioport range 0x460-0x461 has been reserved
[ 0.319929] system 00:0b: ioport range 0x1ec-0x1ef has been reserved
[ 0.326356] system 00:0b: ioport range 0x400-0x4fe could not be reserved
[ 0.333126] system 00:0b: ioport range 0x600-0x600 has been reserved
[ 0.339547] system 00:0b: ioport range 0x800-0x80f has been reserved
[ 0.345969] system 00:0b: ioport range 0xc00-0xcfe could not be reserved
[ 0.352740] system 00:0b: ioport range 0xf50-0xf58 has been reserved
[ 0.359162] system 00:0b: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.401487] NET: Registered protocol family 2
[ 0.406011] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.413574] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.421683] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.428608] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.435294] TCP reno registered
[ 0.438607] NET: Registered protocol family 1
[ 0.457810] Unpacking initramfs...
[ 0.677545] Freeing initrd memory: 6461k freed
[ 0.687684] audit: initializing netlink socket (disabled)
[ 0.693190] type=2000 audit(1294691487.693:1): initialized
[ 0.701390] highmem bounce pool size: 64 pages
[ 0.705916] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.713712] VFS: Disk quotas dquot_6.5.2
[ 0.717759] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.724429] msgmni has been set to 1740
[ 0.728511] alg: No test for stdrng (krng)
[ 0.732731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.740216] io scheduler noop registered
[ 0.744206] io scheduler anticipatory registered
[ 0.748887] io scheduler deadline registered
[ 0.753273] io scheduler cfq registered (default)
[ 0.758213] isapnp: Scanning for PnP cards...
[ 1.116716] isapnp: No Plug & Play device found
[ 1.122695] Linux agpgart interface v0.103
[ 1.127011] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.133447] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.139835] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.145671] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x64,0x60
irq 1,12
[ 1.153322] PNP: PS/2 controller has invalid data port 0x64; using default
0x60
[ 1.160715] PNP: PS/2 controller has invalid command port 0x60; using
default 0x64
[ 1.170076] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.175115] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.180331] mice: PS/2 mouse device common for all mice
[ 1.185723] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.191918] rtc0: alarms up to one year, 242 bytes nvram
[ 1.197342] EISA: Probing bus 0 at eisa.0
[ 1.201440] Cannot allocate resource for EISA slot 2
[ 1.206498] EISA: Detected 0 cards.
[ 1.210062] cpuidle: using governor ladder
[ 1.214240] cpuidle: using governor menu
[ 1.218248] No iBFT detected.
[ 1.221359] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.230489] TCP cubic registered
[ 1.233897] NET: Registered protocol family 10
[ 1.238919] lo: Disabled Privacy Extensions
[ 1.243577] Mobile IPv6
[ 1.246090] NET: Registered protocol family 17
[ 1.252087] Using IPI Shortcut mode
[ 1.255741] registered taskstats version 1
[ 1.260131] rtc_cmos 00:08: setting system clock to 2011-01-10 20:31:29 UTC
(1294691489)
[ 1.268501] Initalizing network drop monitor service
[ 1.273559] Freeing unused kernel memory: 444k freed
[ 1.278898] Write protecting the kernel text: 2340k
[ 1.283860] Write protecting the kernel read-only data: 896k
[ 1.883385] Floppy drive(s): fd0 is 1.44M
[ 1.887563] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.894081] Copyright (c) 1999-2006 Intel Corporation.
[ 1.899633] usbcore: registered new interface driver usbfs
[ 1.905874] usbcore: registered new interface driver hub
[ 1.911437] usbcore: registered new device driver usb
[ 1.916731] e1000 0000:06:08.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[ 1.927539] FDC 0 is a National Semiconductor PC87306
[ 1.932880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.948432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.954914] ACPI: Invalid link context
[ 1.958742] ohci_hcd 0000:00:0f.2: PCI INT A: no GSI - using IRQ 11
[ 2.209570] e1000: 0000:06:08.0: e1000_probe: (PCI-X:100MHz:64-bit)
00:0d:60:eb:2b:08
[ 2.217730] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 2.223051] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus
number 1
[ 2.230550] ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfebfe000
[ 2.257929] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 2.264906] e1000 0000:06:08.1: PCI INT B -> GSI 30 (level, low) -> IRQ 30
[ 2.294018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.300881] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.308185] usb usb1: Product: OHCI Host Controller
[ 2.313130] usb usb1: Manufacturer: Linux 2.6.32-5-486 ohci_hcd
[ 2.319122] usb usb1: SerialNumber: 0000:00:0f.2
[ 2.568252] e1000: 0000:06:08.1: e1000_probe: (PCI-X:100MHz:64-bit)
00:0d:60:eb:2b:09
[ 2.576522] usb usb1: configuration #1 chosen from 1 choice
[ 2.582241] hub 1-0:1.0: USB hub found
[ 2.586068] hub 1-0:1.0: 4 ports detected
[ 2.618233] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 2.631243] udev[46]: renamed network interface eth1 to enet2
[ 2.638427] udev[48]: renamed network interface eth0 to enet1
Starting system log daemon: syslogd, klogd.
Detecting network hardware ..95%..100%
[...]
Checking the Debian archive mirror ..25%..50%..75%..100%
Loading additional components
..10%..20%..30%..40%..50%..60%..70%..80%..90%..100%
Generating SSH host key
Setting up the clock ..100%
Detecting disks and all other hardware
[ 108.028034] BUG: unable to handle kernel paging request at 5f494350
[ 108.032002] IP: [<f80aeefd>] mpt_handshake_req_reply_wait+0x69/0x257
[mptbase]
[ 108.032002] *pde = 00000000
[ 108.032002] Oops: 0000 [#1]
[ 108.032002] last sysfs file: /sys/bus/pci/drivers/mptspi/uevent
[ 108.032002] Modules linked in: sg sr_mod cdrom ata_generic mptspi mptscsih
pata_serverworks mptbase scsi_transport_spi libata rsrc_nonstatic pcmcia_core
usb_storage scsi_mod fan ohci_hcd ehci_hcd thermal thermal_sys floppy e1000
usbcore nls_base
[ 108.032002]
[ 108.032002] Pid: 5163, comm: scsi_scan_2 Not tainted (2.6.32-5-486 #1)
eserver xSeries 345 -[867091X]-
[ 108.032002] EIP: 0060:[<f80aeefd>] EFLAGS: 00010282 CPU: 0
[ 108.032002] EIP is at mpt_handshake_req_reply_wait+0x69/0x257 [mptbase]
[ 108.032002] EAX: ffffffff EBX: ffffffff ECX: f7313b8c EDX: 5f494350
[ 108.032002] ESI: f68b6000 EDI: f7313bdc EBP: 00000001 ESP: f7313bac
[ 108.032002] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 108.032002] Process scsi_scan_2 (pid: 5163, ti=f7312000 task=f68978e0
task.ti=f7312000)
[ 108.032002] Stack:
[ 108.032002] 0000000b f68b624c f68b6000 f68b6000 f7313c30 00002714 f80af707
00000014
[ 108.032002] <0> f7313c1c 0000000a 00000001 00000001 02000004 00011000
00000000 00000050
[ 108.032002] <0> 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000
[ 108.032002] Call Trace:
[ 108.032002] [<f80af707>] ? SendIocInit+0x184/0x27d [mptbase]
[ 108.032002] [<c102b8a6>] ? process_timeout+0x0/0x5
[ 108.032002] [<f80afb39>] ? mpt_downloadboot+0x339/0x381 [mptbase]
[ 108.032002] [<f80afe6a>] ? KickStart+0x2e9/0x562 [mptbase]
[ 108.032002] [<c1243a80>] ? printk+0xe/0x16
[ 108.032002] [<f80b01d8>] ? MakeIocReady+0xf5/0x22f [mptbase]
[ 108.032002] [<f80b1b15>] ? mpt_do_ioc_recovery+0x15c/0x1184 [mptbase]
[ 108.032002] [<c1115377>] ? vsnprintf+0x32c/0x377
[ 108.032002] [<c11150dd>] ? vsnprintf+0x92/0x377
[ 108.032002] [<c10067a2>] ? sched_clock+0x5/0x7
[ 108.032002] [<f812a0d5>] ? mptspi_ioc_reset+0xc/0x2b [mptspi]
[ 108.032002] [<f80b2be8>] ? mpt_HardResetHandler+0xab/0x176 [mptbase]
[ 108.032002] [<f80b31b0>] ? mpt_config+0x337/0x3bf [mptbase]
[ 108.032002] [<f812945d>] ? mptspi_write_spi_device_pg1+0x175/0x1cc [mptspi]
[ 108.032002] [<f8129510>] ? mptspi_write_width+0x5c/0x61 [mptspi]
[ 108.032002] [<f8129cbc>] ? mptspi_target_alloc+0x167/0x17a [mptspi]
[ 108.032002] [<f806b993>] ? scsi_alloc_target+0x1ab/0x212 [scsi_mod]
[ 108.032002] [<f806c898>] ? __scsi_scan_target+0x3f/0x529 [scsi_mod]
[ 108.032002] [<c1019dcb>] ? update_curr+0x102/0x18f
[ 108.032002] [<c1019dcb>] ? update_curr+0x102/0x18f
[ 108.032002] [<c101d11c>] ? dequeue_entity+0x15/0x147
[ 108.032002] [<f806cdc9>] ? scsi_scan_channel+0x47/0x73 [scsi_mod]
[ 108.032002] [<f806cea4>] ? scsi_scan_host_selected+0xaf/0xe4 [scsi_mod]
[ 108.032002] [<f806cf2a>] ? do_scsi_scan_host+0x51/0x56 [scsi_mod]
[ 108.032002] [<f806cf40>] ? do_scan_async+0x11/0xf1 [scsi_mod]
[ 108.032002] [<f806cf2f>] ? do_scan_async+0x0/0xf1 [scsi_mod]
[ 108.032002] [<c103350c>] ? kthread+0x60/0x65
[ 108.032002] [<c10334ac>] ? kthread+0x0/0x65
[ 108.032002] [<c1003997>] ? kernel_thread_helper+0x7/0x10
[ 108.032002] Code: f7 f9 8b 96 84 00 00 00 89 04 24 c1 e0 10 0d 00 00 00 42
89 02 ba 05 00 00 00 89 e9 89 f0 e8 23 ff ff ff 8b 96 84 00 00 00 89 c3 <8b> 02
83 c9 ff a9 00 00 00 08 0f 84 85 01 00 00 83 c2 30 31 c0
[ 108.032002] EIP: [<f80aeefd>] mpt_handshake_req_reply_wait+0x69/0x257
[mptbase] SS:ESP 0068:f7313bac
[ 108.032002] CR2: 000000005f494350
[ 108.357481] ---[ end trace 39e910fe8ff9f4b1 ]---
..95%..100%
[ 109.548029] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 109.552007] IP: [<(null)>] (null)
[ 109.552007] *pde = 00000000
[ 109.552007] Oops: 0000 [#2]
[ 109.552007] last sysfs file:
/sys/devices/pci0000:00/0000:00:0f.1/host0/target0:0:0/0:0:0:0/block/sr0/uevent
[ 109.552007] Modules linked in: ide_generic ide_core sg sr_mod cdrom
ata_generic mptspi mptscsih pata_serverworks mptbase scsi_transport_spi libata
rsrc_nonstatic pcmcia_core usb_storage scsi_mod fan ohci_hcd ehci_hcd thermal
thermal_sys floppy e1000 usbcore nls_base
[ 109.552007]
[ 109.552007] Pid: 5317, comm: grep Tainted: G D (2.6.32-5-486 #1)
eserver xSeries 345 -[867091X]-
[ 109.552007] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 109.552007] EIP is at 0x0
[ 109.552007] EAX: 00000000 EBX: 0000006e ECX: 00000000 EDX: f68f9e3c
[ 109.552007] ESI: f68b69fc EDI: c1407c10 EBP: 00000000 ESP: f68f9e1c
[ 109.552007] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 109.552007] Process grep (pid: 5317, ti=f68f8000 task=f6894410
task.ti=f68f8000)
[ 109.552007] Stack:
[ 109.552007] c102b4be f68f9e3c 00000100 00000000 c1408a1c c140881c c140861c
c140841c
[ 109.552007] <0> f68f9e3c f68f9e3c 00000046 00000001 00000004 c1407b00
c1026a33 00000101
[ 109.552007] <0> 0000000a 00000100 00000046 f68b6000 f68f9f00 00000001
c1026b05 f68b6000
[ 109.552007] Call Trace:
[ 109.552007] [<c102b4be>] ? run_timer_softirq+0x156/0x1cd
[ 109.552007] [<c1026a33>] ? __do_softirq+0x8e/0x130
[ 109.552007] [<c1026b05>] ? do_softirq+0x30/0x3b
[ 109.552007] [<c1026bc4>] ? irq_exit+0x25/0x53
[ 109.552007] [<c100e64f>] ? smp_apic_timer_interrupt+0x60/0x68
[ 109.552007] [<c1003811>] ? apic_timer_interrupt+0x31/0x40
[ 109.552007] [<c109007b>] ? validate_slab_slab+0x6f/0xea
[ 109.552007] [<c109bcc3>] ? do_path_lookup+0x25/0x68
[ 109.552007] [<c109be11>] ? do_filp_open+0xc5/0x7ba
[ 109.552007] [<c10969da>] ? vfs_fstatat+0x2a/0x50
[ 109.552007] [<c10a35a6>] ? alloc_fd+0x4a/0xac
[ 109.552007] [<c1092472>] ? do_sys_open+0x48/0x115
[ 109.552007] [<c1092583>] ? sys_open+0x1e/0x23
[ 109.552007] [<c100314c>] ? syscall_call+0x7/0xb
[ 109.552007] Code: Bad EIP value.
[ 109.552007] EIP: [<00000000>] 0x0 SS:ESP 0068:f68f9e1c
[ 109.552007] CR2: 0000000000000000
[ 109.757296] ---[ end trace 39e910fe8ff9f4b2 ]---
[ 109.761983] Kernel panic - not syncing: Fatal exception in interrupt
[ 109.768409] Pid: 5317, comm: grep Tainted: G D 2.6.32-5-486 #1
[ 109.775005] Call Trace:
[ 109.777522] [<c12439cc>] ? panic+0x38/0xde
[ 109.781770] [<c124571c>] ? oops_end+0x81/0x8d
[ 109.786288] [<c1014e7c>] ? no_context+0x104/0x10d
[ 109.791151] [<c1014fcc>] ? __bad_area_nosemaphore+0x147/0x152
[ 109.797056] [<c10067a2>] ? sched_clock+0x5/0x7
[ 109.801656] [<c10372df>] ? sched_clock_local+0x15/0x11c
[ 109.807038] [<c1246551>] ? do_page_fault+0x0/0x26a
[ 109.811985] [<c1014fe1>] ? bad_area_nosemaphore+0xa/0xc
[ 109.817369] [<c1244e2b>] ? error_code+0x6b/0x70
[ 109.822055] [<c102b4be>] ? run_timer_softirq+0x156/0x1cd
[ 109.827527] [<c1026a33>] ? __do_softirq+0x8e/0x130
[ 109.832474] [<c1026b05>] ? do_softirq+0x30/0x3b
[ 109.837164] [<c1026bc4>] ? irq_exit+0x25/0x53
[ 109.841679] [<c100e64f>] ? smp_apic_timer_interrupt+0x60/0x68
[ 109.847584] [<c1003811>] ? apic_timer_interrupt+0x31/0x40
[ 109.853139] [<c109007b>] ? validate_slab_slab+0x6f/0xea
[ 109.858522] [<c109bcc3>] ? do_path_lookup+0x25/0x68
[ 109.863556] [<c109be11>] ? do_filp_open+0xc5/0x7ba
[ 109.868504] [<c10969da>] ? vfs_fstatat+0x2a/0x50
[ 109.873279] [<c10a35a6>] ? alloc_fd+0x4a/0xac
[ 109.877795] [<c1092472>] ? do_sys_open+0x48/0x115
[ 109.882657] [<c1092583>] ? sys_open+0x1e/0x23
[ 109.887172] [<c100314c>] ? syscall_call+0x7/0xb
[ 109.891859] Rebooting in 10 seconds..
~ # depmod -a
~ # modprobe mptspi
~ # [ 143.684565] BUG: unable to handle kernel paging request at 49544371
[ 143.688003] IP: [<f809fd0f>] WaitForDoorbellAck+0x2d/0x72 [mptbase]
[ 143.688003] *pde = 00000000
[ 143.688003] Oops: 0000 [#1]
[ 143.688003] last sysfs file: /sys/bus/pci/drivers/mptspi/uevent
[ 143.688003] Modules linked in: mptspi mptscsih mptbase scsi_transport_spi
rsrc_nonstatic pcmcia_core usb_storage scsi_mod fan ohci_hcd ehci_hcd thermal
thermal_sys floppy usbcore nls_base e1000
[ 143.688003]
[ 143.688003] Pid: 4910, comm: scsi_scan_0 Not tainted (2.6.32-5-486 #1)
eserver xSeries 345 -[867091X]-
[ 143.688003] EIP: 0060:[<f809fd0f>] EFLAGS: 00010206 CPU: 0
[ 143.688003] EIP is at WaitForDoorbellAck+0x2d/0x72 [mptbase]
[ 143.688003] EAX: 49544371 EBX: 00001386 ECX: 00000000 EDX: 00000000
[ 143.688003] ESI: 00000001 EDI: f68b6000 EBP: 00000001 ESP: f73cfb9c
[ 143.688003] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 143.688003] Process scsi_scan_0 (pid: 4910, ti=f73ce000 task=f6866cb0
task.ti=f73ce000)
[ 143.688003] Stack:
[ 143.688003] 00000002 f68b6000 f73cfbdc f809ff6d 0000000b f68b624c f68b6000
f68b6000
[ 143.688003] <0> f73cfc30 00002714 f80a0707 00000014 f73cfc1c 0000000a
00000001 00000001
[ 143.688003] <0> 02000004 00011000 00000000 00000050 00000000 00000000
00000000 00000000
[ 143.688003] Call Trace:
[ 143.688003] [<f809ff6d>] ? mpt_handshake_req_reply_wait+0xd9/0x257 [mptbase]
[ 143.688003] [<f80a0707>] ? SendIocInit+0x184/0x27d [mptbase]
[ 143.688003] [<c102b8a6>] ? process_timeout+0x0/0x5
[ 143.688003] [<f80a0b39>] ? mpt_downloadboot+0x339/0x381 [mptbase]
[ 143.688003] [<f80a0e6a>] ? KickStart+0x2e9/0x562 [mptbase]
[ 143.688003] [<c1243a80>] ? printk+0xe/0x16
[ 143.688003] [<f80a11d8>] ? MakeIocReady+0xf5/0x22f [mptbase]
[ 143.688003] [<f80a2b15>] ? mpt_do_ioc_recovery+0x15c/0x1184 [mptbase]
[ 143.688003] [<c1115377>] ? vsnprintf+0x32c/0x377
[ 143.688003] [<c11150dd>] ? vsnprintf+0x92/0x377
[ 143.688003] [<c10067a2>] ? sched_clock+0x5/0x7
[ 143.688003] [<f80e80d5>] ? mptspi_ioc_reset+0xc/0x2b [mptspi]
[ 143.688003] [<f80a3be8>] ? mpt_HardResetHandler+0xab/0x176 [mptbase]
[ 143.688003] [<f80a41b0>] ? mpt_config+0x337/0x3bf [mptbase]
[ 143.688003] [<f80e745d>] ? mptspi_write_spi_device_pg1+0x175/0x1cc [mptspi]
[ 143.688003] [<f80e7510>] ? mptspi_write_width+0x5c/0x61 [mptspi]
[ 143.688003] [<f80e7cbc>] ? mptspi_target_alloc+0x167/0x17a [mptspi]
[ 143.688003] [<f8019993>] ? scsi_alloc_target+0x1ab/0x212 [scsi_mod]
[ 143.688003] [<f801a898>] ? __scsi_scan_target+0x3f/0x529 [scsi_mod]
[ 143.688003] [<c1019dcb>] ? update_curr+0x102/0x18f
[ 143.688003] [<c1019dcb>] ? update_curr+0x102/0x18f
[ 143.688003] [<c101d11c>] ? dequeue_entity+0x15/0x147
[ 143.688003] [<f801adc9>] ? scsi_scan_channel+0x47/0x73 [scsi_mod]
[ 143.688003] [<f801aea4>] ? scsi_scan_host_selected+0xaf/0xe4 [scsi_mod]
[ 143.688003] [<f801af2a>] ? do_scsi_scan_host+0x51/0x56 [scsi_mod]
[ 143.688003] [<f801af40>] ? do_scan_async+0x11/0xf1 [scsi_mod]
[ 143.688003] [<f801af2f>] ? do_scan_async+0x0/0xf1 [scsi_mod]
[ 143.688003] [<c103350c>] ? kthread+0x60/0x65
[ 143.688003] [<c10334ac>] ? kthread+0x0/0x65
[ 143.688003] [<c1003997>] ? kernel_thread_helper+0x7/0x10
[ 143.688003] Code: c7 56 69 f2 e8 03 00 00 49 53 74 06 31 db 31 c0 eb 3f 31
db 31 c0 eb 1a b8 01 00 00 00 e8 49 ba f8 c8 8b 87 84 00 00 00 83 c0 30 <8b> 00
85 c0 79 39 43 4e 75 e3 eb 1d b8 58 89 41 00 e8 53 59 07
[ 143.688003] EIP: [<f809fd0f>] WaitForDoorbellAck+0x2d/0x72 [mptbase] SS:ESP
0068:f73cfb9c
[ 143.688003] CR2: 0000000049544371
[ 144.013506] ---[ end trace 0f7361b216c8c1d1 ]---
[ 144.816010] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 144.820002] IP: [<(null)>] (null)
[ 144.820002] *pde = 00000000
[ 144.820002] Thread overran stack, or stack corrupted
[ 144.820002] Oops: 0000 [#2]
[ 144.820002] last sysfs file: /sys/bus/pci/drivers/mptspi/uevent
[ 144.820002] Modules linked in: mptspi mptscsih mptbase scsi_transport_spi
rsrc_nonstatic pcmcia_core usb_storage scsi_mod fan ohci_hcd ehci_hcd thermal
thermal_sys floppy usbcore nls_base e1000
[ 144.820002]
[ 144.820002] Pid: 0, comm: swapper Tainted: G D (2.6.32-5-486 #1)
eserver xSeries 345 -[867091X]-
[ 144.820002] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 144.820002] EIP is at 0x0
[ 144.820002] EAX: 00000000 EBX: 00000023 ECX: 00000000 EDX: c132bf44
[ 144.820002] ESI: f68b69fc EDI: c1407c10 EBP: 00000000 ESP: c132bf24
[ 144.820002] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 144.820002] Process swapper (pid: 0, ti=c132a000 task=c1331b00
task.ti=c132a000)
[ 144.820002] Stack:
[ 144.820002] c102b4be c132bf44 00000100 00000000 c1408a1c c140881c c140861c
c140841c
[ 144.820002] <0> c132bf44 c132bf44 00000046 00000001 00000004 c1407b00
c1026a33 00000101
[ 144.820002] <0> 0000000a 00000100 00000046 00099800 c132d000 015f4003
c1026b05 00099800
[ 144.820002] Call Trace:
[ 144.820002] [<c102b4be>] ? run_timer_softirq+0x156/0x1cd
[ 144.820002] [<c1026a33>] ? __do_softirq+0x8e/0x130
[ 144.820002] [<c1026b05>] ? do_softirq+0x30/0x3b
[ 144.820002] [<c1026bc4>] ? irq_exit+0x25/0x53
[ 144.820002] [<c100e64f>] ? smp_apic_timer_interrupt+0x60/0x68
[ 144.820002] [<c1003811>] ? apic_timer_interrupt+0x31/0x40
[ 144.820002] [<c1013d28>] ? native_safe_halt+0x2/0x3
[ 144.820002] [<c1007758>] ? default_idle+0x37/0x55
[ 144.820002] [<c1002363>] ? cpu_idle+0x6a/0x83
[ 144.820002] [<c1368714>] ? start_kernel+0x2ea/0x2ef
[ 144.820002] Code: Bad EIP value.
[ 144.820002] EIP: [<00000000>] 0x0 SS:ESP 0068:c132bf24
[ 144.820002] CR2: 0000000000000000
[ 145.000156] ---[ end trace 0f7361b216c8c1d2 ]---
[ 145.004844] Kernel panic - not syncing: Fatal exception in interrupt
[ 145.011268] Pid: 0, comm: swapper Tainted: G D 2.6.32-5-486 #1
[ 145.017861] Call Trace:
[ 145.020375] [<c12439cc>] ? panic+0x38/0xde
[ 145.024626] [<c124571c>] ? oops_end+0x81/0x8d
[ 145.029141] [<c1014e7c>] ? no_context+0x104/0x10d
[ 145.034001] [<c1014fcc>] ? __bad_area_nosemaphore+0x147/0x152
[ 145.039904] [<c10195ac>] ? activate_task+0x1e/0x23
[ 145.044854] [<f8032a8e>] ? e1000_clean_rx_irq+0x407/0x431 [e1000]
[ 145.051099] [<c10338c1>] ? autoremove_wake_function+0xd/0x2d
[ 145.056914] [<c10067a2>] ? sched_clock+0x5/0x7
[ 145.061514] [<c10372df>] ? sched_clock_local+0x15/0x11c
[ 145.066894] [<c1246551>] ? do_page_fault+0x0/0x26a
[ 145.071842] [<c1014fe1>] ? bad_area_nosemaphore+0xa/0xc
[ 145.077221] [<c1244e2b>] ? error_code+0x6b/0x70
[ 145.081907] [<c102007b>] ? rt_mutex_setprio+0x28/0xe4
[ 145.087116] [<c102b4be>] ? run_timer_softirq+0x156/0x1cd
[ 145.092584] [<c1026a33>] ? __do_softirq+0x8e/0x130
[ 145.097533] [<c1026b05>] ? do_softirq+0x30/0x3b
[ 145.102218] [<c1026bc4>] ? irq_exit+0x25/0x53
[ 145.106732] [<c100e64f>] ? smp_apic_timer_interrupt+0x60/0x68
[ 145.112637] [<c1003811>] ? apic_timer_interrupt+0x31/0x40
[ 145.118191] [<c1013d28>] ? native_safe_halt+0x2/0x3
[ 145.123222] [<c1007758>] ? default_idle+0x37/0x55
[ 145.128084] [<c1002363>] ? cpu_idle+0x6a/0x83
[ 145.132597] [<c1368714>] ? start_kernel+0x2ea/0x2ef
[ 145.137631] Rebooting in 10 seconds..
~ # depmod -a
~ # dmesg -n8
~ # modprobe mptspi
[ 378.174700] Fusion MPT base driver 3.04.12
[ 378.178889] Copyright (c) 1999-2008 LSI Corporation
[ 378.193098] Fusion MPT SPI Host driver 3.04.12
[ 378.197713] mptspi 0000:08:07.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 378.204836] mptbase: ioc0: Initiating bringup
[ 378.704008] ioc0: LSI53C1030 B2: Capabilities={Initiator}
[ 379.707854] scsi0 : ioc0: LSI53C1030 B2, FwRev=01000e00h, Ports=1, MaxQ=222,
IRQ=27
[ 380.103665] mptspi 0000:08:07.1: PCI INT B -> GSI 28 (level, low) -> IRQ 28
[ 380.110868] mptbase: ioc1: Initiating bringup
[ 380.600007] ioc1: LSI53C1030 B2: Capabilities={Initiator}
[ 381.627571] scsi 0:0:0:0: Direct-Access IBM-ESXS DTN073C3UCDY10FN S27Y
PQ: 0 ANSI: 3
[ 381.635813] scsi target0:0:0: Beginning Domain Validation
[ 381.641566] scsi1 : ioc1: LSI53C1030 B2, FwRev=01000e00h, Ports=1, MaxQ=222,
IRQ=28
[ 382.040535] scsi target0:0:0: Ending Domain Validation
[ 382.045869] scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 382.055819] scsi 0:0:1:0: Direct-Access FUJITSU MAP3735NC 5605
PQ: 0 ANSI: 3
[ 382.064031] scsi target0:0:1: Beginning Domain Validation
[ 382.083002] scsi target0:0:1: Ending Domain Validation
[ 382.088292] scsi target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 382.097074] scsi 0:0:2:0: Direct-Access IBM-ESXS DTN073C3UCDY10FN S27Y
PQ: 0 ANSI: 3
[ 382.105286] scsi target0:0:2: Beginning Domain Validation
[ 382.120449] scsi target0:0:2: Ending Domain Validation
[ 382.125734] scsi target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 383.134320] scsi 0:0:8:0: Processor IBM 32P0032a S320 1 1
PQ: 0 ANSI: 2
[ 383.142539] scsi target0:0:8: Beginning Domain Validation
[ 383.148547] scsi target0:0:8: Ending Domain Validation
[ 383.153831] scsi target0:0:8: asynchronous
[ 384.928475] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 384.933952] sd 0:0:0:0: [sda] 143374000 512-byte logical blocks: (73.4
GB/68.3 GiB)
[ 384.941845] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 384.947364] sd 0:0:2:0: Attached scsi generic sg2 type 0
[ 384.952789] sd 0:0:2:0: [sdc] 143374000 512-byte logical blocks: (73.4
GB/68.3 GiB)
[ 384.960533] sd 0:0:0:0: [sda] Write Protect is off
[ 384.965397] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 384.970522] sd 0:0:1:0: [sdb] 143374650 512-byte logical blocks: (73.4
GB/68.3 GiB)
[ 384.978660] scsi 0:0:8:0: Attached scsi generic sg3 type 3
[ 384.985137] sd 0:0:2:0: [sdc] Write Protect is off
[ 384.990008] sd 0:0:2:0: [sdc] Mode Sense: cb 00 00 08
[ 384.995154] sd 0:0:1:0: [sdb] Write Protect is off
[ 385.000013] sd 0:0:1:0: [sdb] Mode Sense: b3 00 00 08
[ 385.005187] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 385.016530] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 385.027037] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 385.038307] sda:
[ 385.041085] sdc:
[ 385.043155] sdb: sda1 sda2
[ 385.052183] sdc1 sdc2
[ 385.055091] sdb1 sdb2
[ 385.059482] sd 0:0:0:0: [sda] Attached SCSI disk
[ 385.066391] sd 0:0:2:0: [sdc] Attached SCSI disk
[ 385.072553] sd 0:0:1:0: [sdb] Attached SCSI disk
