Package: installation-reports
Boot method: Used mini-iso burnt on CD-RW
Image version:
http://mirror.switch.ch/ftp/mirror/debian/dists/squeeze/main/installer-i386/current/images/netboot/mini.iso
Date: 2010-11-19T16:20
Machine: HP Pavillion m9060.ch
Partitions: see debug logs
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
This motherboard supports Intel Matrix BIOS RAID so I inserted two HDD's,
activated "RAID" in the BIOS SATA settings, then created a logical volume
with Ctrl+I (Intel's built-in BIOS RAID manager). Then I created several
Linux ext3 partitions using Partition Magic 8.0 for /, /usr, /home and so
on.
Problem: The RAID Volume with partitions is detected correctly as /dev/md126
together with all /dev/md126px partitions but as read-only (so Debian's
partition manager part can't format the swap area. => Continuation of
installation is not possible.
Also a problem: The physical volumes behind appear, too. => The installer
marks for example formating the swap partition on three locations
(/dev/sde8, /dev/sdf8 and /dev/md126p8 in this example). These shouldn't be
offered for partitioning because they are part of the RAID volume
The full debug logs details are saved at
http://beilagen.dreael.ch/Diverses/Bug_Debian_Squeeze_Intel_Matrix_BIOS_RAID/
Andreas
--
Teste die PC-Sicherheit mit www.sec-check.net
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/6596c1560356482c96d2da8656d98...@meilebiz.loc
