Hi, Thanks for spotting that! Fixed and improved indentation.
A Sábado 06 Novembro 2010 19:01:30 David Prévot você escreveu: > Hi Miguel, debian-boot CC [please, keep me CC, I'm not subscribed], > > You recently updated the devel/debian-installer/errata.wml webpage, but > I wonder if you didn't remove the “zipl installation” section by mistake > instead of the following os-prober one you nearly duplicated. > > http://cvs.debian.org/webwml/webwml/english/devel/debian-installer/errata.w > ml?r1=1.133&r2=1.134 > > Regards > > David -- Melhores cumprimentos/Best regards, Miguel Figueiredo http://www.DebianPT.org
Index: errata.wml =================================================================== RCS file: /cvs/webwml/webwml/english/devel/debian-installer/errata.wml,v retrieving revision 1.135 diff -u -r1.135 errata.wml --- errata.wml 5 Nov 2010 02:30:27 -0000 1.135 +++ errata.wml 7 Nov 2010 21:12:17 -0000 @@ -12,12 +12,15 @@ <dl class="gloss"> <dt>Partitoning fails on kFreeBSD</dt> - <dd>There are reports of failing partitioning on kFreeBSD. - The problem seems to be related with partitions alignment / extended partitions.<br /> + <dd> + There are reports of failing partitioning on kFreeBSD. + The problem seems to be related with partitions alignment / extended + partitions.<br /> See <a href="http://bugs.debian.org/593733";>#593733</a>, <a href="http://bugs.debian.org/597088";>#597088</a> and <a href="http://bugs.debian.org/602129";>#602129</a>. </dd> + <dt>Hibernation doesn't work with swap on lvm</dt> <dd> Resuming from hibernation doesn't work if swap is on lvm. initramfs @@ -25,32 +28,41 @@ /etc/initramfs-tools/conf.d/resume. See <a href="http://bugs.debian.org/568877";>#568877</a>. </dd> + <dt>Network/Graphic/Storage card doesn't work properly</dt> <dd> - There is several hardware, notably network cards, graphic cards and storage controllers, that require binary non-free firmware to work properly.<br /> - Debian is commited to free software values and never make the system require non-free software (see Debian's <a href="http://www.debian.org/social_contract";>Social Contract</a>). So, non-free firmware is not included in the installer.<br /> - But if you want to load any external firmware during installation you are free to do it. The process is documented in the installation manual. - </dd> - <dt>os-prober causes data corruption if filesystem is being used by another host</dt> - <dd> - os-prober causes data corruption on setups where filesystems are - already mounted on other hosts. This issue has been identified on - a SAN setup and on a virtual machine that uses an existing logical - volume. - See <a href="http://bugs.debian.org/599203";>#599203</a> and - <a href="http://bugs.debian.org/556739";>#556739</a>. + There is several hardware, notably network cards, graphic cards and + storage controllers, that require binary non-free firmware to work + properly.<br /> + Debian is commited to free software values and never make the system + require non-free software (see Debian's <a href="http://www.debian.org/social_contract";> + Social Contract</a>). So, non-free firmware is not included in the + installer.<br /> + But if you want to load any external firmware during installation + you are free to do it. The process is documented in the installation manual. + </dd> + + <dt>zipl installation problem that makes s390 uninstalable</dt> + <dd> + If created a dedicated partition for the /boot directory system-boot + fails after installation.</br > + See <a href="http://bugs.debian.org/519254";>#519254</a>. + </dd> + <dt>os-prober causes data corruption on a SAN setup</dt> <dd> os-prober causes data corruption on a SAN setup; mounts SAN volumes that are already mounted on a different host. See <a href="http://bugs.debian.org/599203";>#599203</a>. </dd> + <dt>Failed to install on powerpc NewWorld with added disk controller</dt> <dd> yaboot: failed to install boot loader with addon Promise card as disk controller on powerpc NewWorld. See <a href="http://bugs.debian.org/589701";>#589701</a>. </dd> + <dt>Speakup doesn't get automatically configured</dt> <dd> When installing with speakup enabled, speakup doesn't get @@ -63,6 +75,7 @@ where foobar is replaced by the name of the desired speakup driver. Then come back to VT1 to let d-i finish and reboot. </dd> + <dt>Buggy routers may cause network problems</dt> <dd> If you experience network problems during the installation, this may be @@ -80,6 +93,7 @@ <tt>echo 4096 65536 65536 >/proc/sys/net/ipv4/tcp_rmem</tt><br /> <tt>echo 4096 65536 65536 >/proc/sys/net/ipv4/tcp_wmem</tt> </dd> + <dt>Country names not properly sorted in English</dt> <dd> During mirror selection the list of country name is sorted by
