Your message dated Sun, 3 Oct 2010 12:04:27 +0200
with message-id <20101003100427.gf25...@mykerinos.kheops.frmug.org>
and subject line Re: Bug#598924: Cross-installation of testing-release on PIII
- Systems
has caused the Debian Bug report #598924,
regarding Cross-installation of testing-release on PIII - Systems
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
598924: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=598924
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Version: 2.42
Severity: wishlist
Cross-installation of testing-release on 'MEDION 2001' --> HP e-Vectra
-- Package-specific info:
Boot method: cd
Image version: testing i386 2010-09-20
Date: <Friday, 2010-09-24, about 15.00 h>
Machine: HP e-Vectra
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 9254552 707044 8077392 9% /
tmpfs tmpfs 126828 0 126828 0% /lib/init/rw
udev tmpfs 122520 128 122392 1% /dev
tmpfs tmpfs 126828 0 126828 0% /dev/shm
/dev/sdb1 vfat 3908184 2077780 1830404 54% /mnt/sdb1
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [e]
Detect network card: [e]
Configure network: [e]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Install base system: [o]
Clock/timezone setup: [o]
User/password setup: [o]
Install tasks: [o]
Install boot loader: [o]
Overall install: [o]
Comments/Problems:
Debian testing was installed on A Medion 2001 PIII- Computer in order to
put the harddisk into an HP e-Vectra, using the network-mirror
ftp.plusline.de . The decision to use this method was made because there
was no slimline CD-drive available and USB-booting from USB 2.0 -devices
failed on the HP box.
The automatically generated report follows. It shows the hardware
information of the hardware on which it was installed initially.
Because of this the information about the machine on which the operating
system is really running now is attached. I looked through the following
report and tried to create something similar manually, but left out lsusb.
Post installation issues:
The only problem that occured, when first booting from the newly
installed hdd was that there was no functioning network interface. There
were two NICs in the Medion-box. So the interface in the HP-box was
called eth2 and /etc/network/interfaces had to be altered accordingly.
After gathering installation/hardware data the packages xfce4 and xdm
were installed and no further configuration-work had to be done to set
up a running desktop-system.
It is well usable and feels OK. As a next step I am going to build a
desktop-kernel for it, to improve latencies some more.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="6.0 (squeeze) - installer build 20100912"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux squeeze 2.6.32-5-486 #1 Thu Aug 12 12:59:56 UTC 2010
i686 GNU/Linux
lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc.
VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev c4)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:803a]
lspci -knn: Kernel driver in use: agpgart-via
lspci -knn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc.
VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598]
lspci -knn: 00:04.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686
[Apollo Super South] [1106:0686] (rev 22)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:803a]
lspci -knn: Kernel driver in use: parport_pc
lspci -knn: 00:04.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10)
lspci -knn: Kernel driver in use: pata_via
lspci -knn: 00:04.2 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 10)
lspci -knn: Subsystem: First International Computer, Inc. Device
[0925:1234]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:04.3 USB Controller [0c03]: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 10)
lspci -knn: Subsystem: First International Computer, Inc. Device
[0925:1234]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:04.4 Host bridge [0600]: VIA Technologies, Inc. VT82C686
[Apollo Super ACPI] [1106:3057] (rev 30)
lspci -knn: 00:05.0 Multimedia audio controller [0401]: Ensoniq 5880B
[AudioPCI] [1274:5880] (rev 03)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:803a]
lspci -knn: 00:09.0 Ethernet controller [0200]: Realtek Semiconductor
Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
lspci -knn: Subsystem: Accton Technology Corporation Device [1113:ec01]
lspci -knn: Kernel driver in use: 8139too
lspci -knn: 00:0a.0 Ethernet controller [0200]: Realtek Semiconductor
Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
lspci -knn: Subsystem: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139]
lspci -knn: Kernel driver in use: 8139too
lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies
Inc Rage 128 Pro Ultra TF [1002:5446]
lspci -knn: Subsystem: ATI Technologies Inc Rage 128 Pro Ultra TF
[1002:5446]
usb-list:
usb-list: Bus 01 Device 01: UHCI Host Controller [1d6b:0001]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00
Protocol 00
usb-list: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00
Driver hub
usb-list:
usb-list: Bus 02 Device 01: UHCI Host Controller [1d6b:0001]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00
Protocol 00
usb-list: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00
Driver hub
lsmod: Module Size Used by
lsmod: ufs 55534 0
lsmod: qnx4 5078 0
lsmod: ntfs 162603 0
lsmod: reiserfs 173360 0
lsmod: dm_mod 45925 0
lsmod: md_mod 66027 0
lsmod: xfs 404862 0
lsmod: exportfs 2486 1 xfs
lsmod: jfs 133450 0
lsmod: ext4 240225 0
lsmod: jbd2 48423 1 ext4
lsmod: crc16 1027 1 ext4
lsmod: ext3 92740 1
lsmod: jbd 27954 1 ext3
lsmod: vfat 6538 0
lsmod: fat 34480 1 vfat
lsmod: ext2 45198 0
lsmod: mbcache 3482 3 ext4,ext3,ext2
lsmod: 8139cp 13613 0
lsmod: 8139too 14805 0
lsmod: mii 2654 2 8139cp,8139too
lsmod: nls_utf8 908 0
lsmod: isofs 24384 0
lsmod: rsrc_nonstatic 7061 0
lsmod: pcmcia_core 20510 1 rsrc_nonstatic
lsmod: ide_generic 801 0 [permanent]
lsmod: ide_core 59670 1 ide_generic
lsmod: usb_storage 30413 0
lsmod: fan 2590 0
lsmod: sg 16467 0
lsmod: sr_mod 10734 0
lsmod: cdrom 26475 1 sr_mod
lsmod: sd_mod 25825 3
lsmod: crc_t10dif 1012 1 sd_mod
lsmod: pata_via 5721 2
lsmod: thermal 9210 0
lsmod: uhci_hcd 16021 0
lsmod: ehci_hcd 27989 0
lsmod: libata 117275 1 pata_via
lsmod: thermal_sys 9346 2 fan,thermal
lsmod: parport_pc 15747 0
lsmod: usbcore 98198 4 usb_storage,uhci_hcd,ehci_hcd
lsmod: parport 22170 1 parport_pc
lsmod: scsi_mod 102265 5 usb_storage,sg,sr_mod,sd_mod,libata
lsmod: nls_base 4445 7
ntfs,jfs,vfat,fat,nls_utf8,isofs,usbcore
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: tmpfs 257676 32 257644 0% /dev
df: /dev/sda1 9254552 695820 8088616 8% /target
df: /dev/sda1 9254552 695820 8088616 8% /dev/.static/dev
df: tmpfs 257676 32 257644 0% /target/dev
free: total used free shared
buffers
free: Mem: 515356 368660 146696 0
1796
free: Swap: 467960 0 467960
free: Total: 983316 368660 614656
/proc/cmdline: vga=788 initrd=/install.386/initrd.gz -- quiet
BOOT_IMAGE=/install.386/vmlinuz
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 8
/proc/cpuinfo: model name : Pentium III (Coppermine)
/proc/cpuinfo: stepping : 6
/proc/cpuinfo: cpu MHz : 997.483
/proc/cpuinfo: cache size : 256 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr
pge
mca cmov pse36 mmx fxsr sse
/proc/cpuinfo: bogomips : 1994.96
/proc/cpuinfo: clflush size : 32
/proc/cpuinfo: cache_alignment : 32
/proc/cpuinfo: address sizes : 36 bits physical, 32 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0073 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:04.1
/proc/ioports: 0170-0177 : pata_via
/proc/ioports: 01f0-01f7 : 0000:00:04.1
/proc/ioports: 01f0-01f7 : pata_via
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : 0000:00:04.1
/proc/ioports: 0376-0376 : pata_via
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f0-03f1 : pnp 00:02
/proc/ioports: 03f6-03f6 : 0000:00:04.1
/proc/ioports: 03f6-03f6 : pata_via
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 04d0-04d1 : pnp 00:02
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: a000-a0ff : 0000:00:0a.0
/proc/ioports: a000-a0ff : 8139too
/proc/ioports: a400-a4ff : 0000:00:09.0
/proc/ioports: a400-a4ff : 8139too
/proc/ioports: a800-a83f : 0000:00:05.0
/proc/ioports: b000-b01f : 0000:00:04.3
/proc/ioports: b000-b01f : uhci_hcd
/proc/ioports: b400-b41f : 0000:00:04.2
/proc/ioports: b400-b41f : uhci_hcd
/proc/ioports: b800-b80f : 0000:00:04.1
/proc/ioports: b800-b80f : pata_via
/proc/ioports: d000-dfff : PCI Bus 0000:01
/proc/ioports: d800-d8ff : 0000:01:00.0
/proc/ioports: e400-e4ff : 0000:00:04.4
/proc/ioports: e400-e403 : ACPI PM1a_EVT_BLK
/proc/ioports: e404-e405 : ACPI PM1a_CNT_BLK
/proc/ioports: e408-e40b : ACPI PM_TMR
/proc/ioports: e420-e423 : ACPI GPE0_BLK
/proc/ioports: e800-e80f : 0000:00:04.4
/proc/ioports: e800-e80f : pnp 00:03
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cbfff : Video ROM
/proc/iomem: 000f0000-000fffff : reserved
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1fffbfff : System RAM
/proc/iomem: 01000000-0124744a : Kernel code
/proc/iomem: 0124744b-01365a7f : Kernel data
/proc/iomem: 013d3000-0144ea07 : Kernel bss
/proc/iomem: 1fffc000-1fffefff : ACPI Tables
/proc/iomem: 1ffff000-1fffffff : ACPI Non-volatile Storage
/proc/iomem: 20000000-2000ffff : 0000:00:09.0
/proc/iomem: f6000000-f60000ff : 0000:00:0a.0
/proc/iomem: f6000000-f60000ff : 8139too
/proc/iomem: f6800000-f68000ff : 0000:00:09.0
/proc/iomem: f6800000-f68000ff : 8139too
/proc/iomem: f7000000-f7dfffff : PCI Bus 0000:01
/proc/iomem: f7000000-f7003fff : 0000:01:00.0
/proc/iomem: f7f00000-fbffffff : PCI Bus 0000:01
/proc/iomem: f7fe0000-f7ffffff : 0000:01:00.0
/proc/iomem: f8000000-fbffffff : 0000:01:00.0
/proc/iomem: f8000000-f9ffffff : vesafb
/proc/iomem: fc000000-fdffffff : 0000:00:00.0
/proc/iomem: ffff0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 157471 XT-PIC-XT timer
/proc/interrupts: 1: 504 XT-PIC-XT i8042
/proc/interrupts: 2: 0 XT-PIC-XT cascade
/proc/interrupts: 5: 127254 XT-PIC-XT eth0
/proc/interrupts: 7: 0 XT-PIC-XT parport0
/proc/interrupts: 8: 1 XT-PIC-XT rtc0
/proc/interrupts: 9: 0 XT-PIC-XT acpi
/proc/interrupts: 10: 0 XT-PIC-XT uhci_hcd:usb1,
uhci_hcd:usb2
/proc/interrupts: 12: 3 XT-PIC-XT i8042
/proc/interrupts: 14: 2638 XT-PIC-XT pata_via
/proc/interrupts: 15: 59674 XT-PIC-XT pata_via
/proc/interrupts: NMI: 0 Non-maskable interrupts
/proc/interrupts: LOC: 0 Local timer interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: PMI: 0 Performance monitoring interrupts
/proc/interrupts: PND: 0 Performance pending work
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 515356 kB
/proc/meminfo: MemFree: 146696 kB
/proc/meminfo: Buffers: 1796 kB
/proc/meminfo: Cached: 322908 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 154964 kB
/proc/meminfo: Inactive: 153852 kB
/proc/meminfo: Active(anon): 1068 kB
/proc/meminfo: Inactive(anon): 14624 kB
/proc/meminfo: Active(file): 153896 kB
/proc/meminfo: Inactive(file): 139228 kB
/proc/meminfo: Unevictable: 31548 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 515356 kB
/proc/meminfo: LowFree: 146696 kB
/proc/meminfo: SwapTotal: 467960 kB
/proc/meminfo: SwapFree: 467960 kB
/proc/meminfo: Dirty: 440 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 15688 kB
/proc/meminfo: Mapped: 2100 kB
/proc/meminfo: Shmem: 32 kB
/proc/meminfo: Slab: 21444 kB
/proc/meminfo: SReclaimable: 18568 kB
/proc/meminfo: SUnreclaim: 2876 kB
/proc/meminfo: KernelStack: 504 kB
/proc/meminfo: PageTables: 408 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 725636 kB
/proc/meminfo: Committed_AS: 19776 kB
/proc/meminfo: VmallocTotal: 507912 kB
/proc/meminfo: VmallocUsed: 7064 kB
/proc/meminfo: VmallocChunk: 498868 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 4096 kB
/proc/meminfo: DirectMap4k: 16368 kB
/proc/meminfo: DirectMap4M: 507904 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S:
Sysfs=/devices/platform/i8042/serio0/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf
ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.1.7-5 Linux PCI Utilities
ii reportbug 4.12.6 reports bugs in the Debian
distrib
installation-report suggests no packages.
-- no debconf information
memory.gz
Description: GNU Zip compressed data
modules.gz
Description: GNU Zip compressed data
pcidev.gz
Description: GNU Zip compressed data
proc.gz
Description: GNU Zip compressed data
--- End Message ---
--- Begin Message ---
> Debian testing was installed on A Medion 2001 PIII- Computer in order to
> put the harddisk into an HP e-Vectra, using the network-mirror
> ftp.plusline.de . The decision to use this method was made because
> there was no slimline CD-drive available and USB-booting from USB
> 2.0 -devices failed on the HP box.
> The automatically generated report follows. It shows the hardware
> information of the hardware on which it was installed initially.
> Because of this the information about the machine on which the
> operating system is really running now is attached. I looked through
> the following report and tried to create something similar manually,
> but left out lsusb.
>
> Post installation issues:
> The only problem that occured, when first booting from the newly
> installed hdd was that there was no functioning network interface. There
> were two NICs in the Medion-box. So the interface in the HP-box was
> called eth2 and /etc/network/interfaces had to be altered accordingly.
> After gathering installation/hardware data the packages xfce4 and xdm
> were installed and no further configuration-work had to be done to
> set up a running desktop-system.
> It is well usable and feels OK. As a next step I am going to build a
> desktop-kernel for it, to improve latencies some more.
Given that your installation was a complete success, I do as
usual with reports for successful installations: I close the bug..:-)
This does not of course mean you weren't right to report. Knowing the
installations are correct is important for the d-i team.
Many thanks for your time testing the Debian Installer and reporting
your results. Have fun with your new Debian system!
signature.asc
Description: Digital signature
--- End Message ---
