Package: installation-reports
Boot method: DVD
Image version:
http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-dvd/debian-testing-i386-DVD-1.iso
Date: 23 October 2010 0530
Machine: Asus Z9000
Processor: Pentium M
Memory: 1 GB
Partitions: Have another OS on it at present, so I could back into debian lenny
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: ATI Technologies Inc RS300 Host Bridge [1002:5830]
(rev 02)
Kernel driver in use: agpgart-ati
00:01.0 PCI bridge [0604]: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
[1002:5838]
Kernel modules: shpchp
00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1
[1002:4347] (rev 01)
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2
[1002:4348] (rev 01)
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller
[1002:4345] (rev 01)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SMBus [1002:4353] (rev 18)
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc Dual Channel Bus Master PCI
IDE Controller [1002:4349]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc Device [1002:434c]
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP200 3COM 3C920B Ethernet
Controller [1002:4342]
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97
Audio Controller [1002:4341]
Kernel driver in use: ATI IXP AC97 controller
Kernel modules: snd-atiixp
00:14.6 Modem [0703]: ATI Technologies Inc IXP AC'97 Modem [1002:434d] (rev 01)
Kernel driver in use: ATI IXP MC97 controller
Kernel modules: snd-atiixp-modem
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS300M AGP
[Radeon Mobility 9100IGP] [1002:5835]
Kernel modules: radeonfb, radeon
02:05.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c475 [1180:0475] (rev b8)
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:05.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C551 IEEE 1394 Controller
[1180:0551]
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:06.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T
[14e4:4401] (rev 01)
Kernel driver in use: b44
Kernel modules: b44
02:07.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
[Calexico2] Network Connection [8086:4220] (rev 05)
Kernel driver in use: ipw2200
Kernel modules: ipw2200
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [E]
Comments/Problems:
The install seemed to go fine until it wasn't able to install the bootloader,
then, of course, it wouldn't boot.
Very strange, as squeeze installed fine around a month ago. However at that
time, I couldn't get grub2 to recognize
and boot lenny, so uninstalled it. I really like the looks of squeeze. I was
excited to try it again, because I
installed kernel 2.6.32 bpo on lenny, and it requires the uuid's of the
partitions, and so might work with grub2 better.
Thanks for any help and/or recommendations.
john
--
John F. Godfrey, Pastor
Belgrade Christian Assembly
Belgrade, MT 59714
"Jesus said to him, 'I am the Way, and the Truth, and the Life; no one
comes to the Father but through Me'" (John 14:6).
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1285257260.4906.10.ca...@spirit.org
