Your message dated Wed, 08 Sep 2010 21:18:35 +0000
with message-id <e1ots2n-0002nv...@ravel.debian.org>
and subject line Closing old installation report #527768
has caused the Debian Bug report #527768,
regarding Mostly sucessfull AlphaServer debian/lenny installation
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
527768: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=527768
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Boot method: netboot via TFTP
Image version:
http://ftp.nl.debian.org/debian/dists/lenny/main/installer-alpha/current/images/netboot/
Date: May 8th 2009
Machine: AlphaServer 1000A 4/266 (alpha)
Partitions:
Filesystem Size Used Avail Use% Mounted on
/dev/sdb1 12G 1.2G 9.3G 12% /
tmpfs 504M 0 504M 0% /lib/init/rw
udev 10M 144K 9.9M 2% /dev
tmpfs 504M 0 504M 0% /dev/shm
/dev/sda2 179M 21M 149M 13% /boot
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [X] see below
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
I had some problems with partioning the hard-disks.
I have two SCSI discs
* sda (old SCSI drive, 4GB) is connected to QLogic ISP1020 internal SCSI
controller
* sdb (new SCSI drive, 18GB) is connected to AHA-2940 PCI-card controller.
I do need the old drive to boot the system, and after bootup the AHA controller
is used to store root-fs on sdb.
So, my setup was:
* sda, partition 0, aboot-partition
* sda, partition 1, /boot mount point, ext2
* sdb, partition 0, / (root-fs), ext3
During installation I configured everything as above, but the debian istaller
only created the root-fs on sdb. sda was not prepared as wished by me.
After going back and do it again, I now could set up the desired setup on sda.
Beside this small ugliness, the other installation went perfectly.
Thanks,
Helge
---------------------
alpha:/boot# report-hw
umame -a: Linux alpha 2.6.26-2-alpha-generic #1 Sun Mar 29 17:40:55 UTC 2009
alpha GNU/Linux
lspci -knn: 00:07.0 EISA bridge [0602]: Intel Corporation 82375EB/SB PCI to
EISA Bridge [8086:0482] (rev 05)
lspci -knn: Kernel driver in use: pci_eisa
lspci -knn: 00:08.0 PCI bridge [0604]: Digital Equipment Corporation DECchip
21050 [1011:0001] (rev 02)
lspci -knn: 00:0b.0 Ethernet controller [0200]: Digital Equipment Corporation
DECchip 21040 [Tulip] [1011:0002] (rev 24)
lspci -knn: Kernel driver in use: de2104x
lspci -knn: Kernel modules: de2104x
lspci -knn: 00:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8129 [10ec:8129]
lspci -knn: Kernel driver in use: 8139too
lspci -knn: Kernel modules: 8139too, r8169
lspci -knn: 01:00.0 SCSI storage controller [0100]: QLogic Corp. ISP1020
Fast-wide SCSI [1077:1020] (rev 02)
lspci -knn: Kernel driver in use: qla1280
lspci -knn: Kernel modules: qla1280
lspci -knn: 01:02.0 SCSI storage controller [0100]: Adaptec AHA-2940/2940W /
AIC-7871 [9004:7178]
lspci -knn: Kernel driver in use: aic7xxx
lspci -knn: Kernel modules: aic7xxx
lsmod: Module Size Used by
lsmod: ipv6 372184 12
lsmod: loop 18624 0
lsmod: serio_raw 7292 0
lsmod: pcspkr 3472 0
lsmod: psmouse 51424 0
lsmod: evdev 12441 1
lsmod: ext3 158912 1
lsmod: jbd 60112 1 ext3
lsmod: sd_mod 31912 5
lsmod: r8169 39388 0
lsmod: aic7xxx 185536 2
lsmod: scsi_transport_spi 30921 1 aic7xxx
lsmod: qla1280 125720 1
lsmod: 8139too 30484 0
lsmod: mii 7712 1 8139too
lsmod: bitrev 2624 2 r8169,8139too
lsmod: scsi_mod 189056 4
sd_mod,aic7xxx,scsi_transport_spi,qla1280
lsmod: de2104x 27588 0
lsmod: crc32 4800 3 r8169,8139too,de2104x
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: /dev/sdb1 11534704 1225060 9723708 12% /
df: tmpfs 515320 0 515320 0% /lib/init/rw
df: udev 10240 144 10096 2% /dev
df: tmpfs 515320 0 515320 0% /dev/shm
df: /dev/sda2 183036 20815 152456 13% /boot
free: total used free shared buffers cached
free: Mem: 1030640 740184 290456 0 57072 617088
free: -/+ buffers/cache: 66024 964616
free: Swap: 488264 0 488264
/proc/cmdline: ro root=/dev/sdb1 console=ttyS0
/proc/cpuinfo: cpu : Alpha
/proc/cpuinfo: cpu model : EV45
/proc/cpuinfo: cpu variation : 7
/proc/cpuinfo: cpu revision : 0
/proc/cpuinfo: cpu serial number :
/proc/cpuinfo: system type : Noritake
/proc/cpuinfo: system variation : 0
/proc/cpuinfo: system revision : 0
/proc/cpuinfo: system serial number :
/proc/cpuinfo: cycle frequency [Hz] : 266666666
/proc/cpuinfo: timer frequency [Hz] : 1024.00
/proc/cpuinfo: page size [bytes] : 8192
/proc/cpuinfo: phys. address bits : 34
/proc/cpuinfo: max. addr. space # : 63
/proc/cpuinfo: BogoMIPS : 522.44
/proc/cpuinfo: kernel unaligned acc : 0 (pc=0,va=0)
/proc/cpuinfo: user unaligned acc : 0 (pc=0,va=0)
/proc/cpuinfo: platform string : AlphaServer 1000A 4/266
/proc/cpuinfo: cpus detected : 1
/proc/cpuinfo: L1 Icache : 16K, 1-way, 32b line
/proc/cpuinfo: L1 Dcache : 16K, 1-way, 32b line
/proc/cpuinfo: L2 cache : 2048K, 1-way, 32b line
/proc/cpuinfo: L3 cache : n/a
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-003f : pic1
/proc/ioports: 0040-005f : timer
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0080 : rtc
/proc/ioports: 00a0-00bf : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0c80-0c83 : Digital AlphaServer 1000, 1000A and AlphaStation
/proc/ioports: 9000-9fff : PCI Bus 0000:01
/proc/ioports: 9000-90ff : 0000:01:00.0
/proc/ioports: 9400-94ff : 0000:01:02.0
/proc/ioports: a000-a07f : 0000:00:0b.0
/proc/ioports: a000-a07f : de2104x
/proc/ioports: a080-a0ff : 0000:00:0c.0
/proc/ioports: a080-a0ff : 8139too
/proc/iomem: 01200000-012fffff : PCI Bus 0000:01
/proc/iomem: 01200000-0120ffff : 0000:01:00.0
/proc/iomem: 01210000-0121ffff : 0000:01:02.0
/proc/iomem: 01220000-01220fff : 0000:01:00.0
/proc/iomem: 01221000-01221fff : 0000:01:02.0
/proc/iomem: 01221000-01221fff : aic7xxx
/proc/iomem: 01300000-0130007f : 0000:00:0b.0
/proc/iomem: 01300000-0130007f : de2104x
/proc/iomem: 01301000-0130107f : 0000:00:0c.0
/proc/iomem: 01301000-0130107f : 8139too
/proc/interrupts: 1: 10 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 4: 2488 XT-PIC serial
/proc/interrupts: 8: 5080867 RTC +timer
/proc/interrupts: 12: 5 XT-PIC i8042
/proc/interrupts: 17: 17238 NORITAKE qla1280
/proc/interrupts: 18: 214781 NORITAKE eth0
/proc/interrupts: 26: 22857 NORITAKE aic7xxx
/proc/interrupts: ERR: 0
/proc/meminfo: MemTotal: 1030640 kB
/proc/meminfo: MemFree: 290728 kB
/proc/meminfo: Buffers: 57072 kB
/proc/meminfo: Cached: 617088 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 201488 kB
/proc/meminfo: Inactive: 486368 kB
/proc/meminfo: SwapTotal: 488264 kB
/proc/meminfo: SwapFree: 488264 kB
/proc/meminfo: Dirty: 32 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 13728 kB
/proc/meminfo: Mapped: 15192 kB
/proc/meminfo: Slab: 47104 kB
/proc/meminfo: SReclaimable: 42408 kB
/proc/meminfo: SUnreclaim: 4696 kB
/proc/meminfo: PageTables: 656 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 1003584 kB
/proc/meminfo: Committed_AS: 59640 kB
/proc/meminfo: VmallocTotal: 8388608 kB
/proc/meminfo: VmallocUsed: 3640 kB
/proc/meminfo: VmallocChunk: 8384040 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff
fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0010 Vendor=001f Product=0001 Version=0100
/proc/bus/input/devices: N: Name="PC Speaker"
/proc/bus/input/devices: P: Phys=isa0061/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd event1
/proc/bus/input/devices: B: EV=40001
/proc/bus/input/devices: B: SND=6
/proc/bus/input/devices:
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
