Your message dated Wed, 08 Sep 2010 03:58:20 +0000
with message-id <[email protected]>
and subject line Closing old installation report #399112
has caused the Debian Bug report #399112,
regarding report on failed etch RC1 installation
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
399112: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=399112
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: installation-reports
Boot method: CD
Image version: <Full URL to image you downloaded is best>
http://cdimage.debian.org/cdimage/etch_di_rc1/i386/iso-cd/debian-testing-1386-netinst.iso
Date: 2006 nov about 10AM EST
Machine: desktop machine
Processor: 32-bit AMD
Memory: 1G
Partitions: <df -Tl will do; the raw partition table is preferred>
lovesong:/farhome/hendrik# df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda3 reiserfs 8393656 8097380 296276 97% /
tmpfs tmpfs 453368 4 453364 1% /dev/shm
/dev/hda4 ext3 12397000 2516256 9250996 22% /woody
/dev/hda5 vfat 2076344 1438188 638156 70% /prufrock/d
/dev/hda6 vfat 5202912 4921736 281176 95% /prufrock/e
/dev/hda7 vfat 1042172 591816 450356 57% /prufrock/f
/dev/hda8 vfat 3134568 2941132 193436 94% /prufrock/g
/dev/hda10 vfat 4184772 4116884 67888 99% /prufrock/i
/dev/hda11 vfat 3134568 2647464 487104 85% /prufrock/j
tmpfs tmpfs 10240 812 9428 8% /dev
lovesong:/farhome/hendrik#
Output of lspci -nn and lspci -vnn:
lovesong:/farhome/hendrik# lspci -nn
0000:00:00.0 0600: 10de:01e0 (rev c1)
0000:00:00.1 0500: 10de:01ea (rev c1)
0000:00:00.2 0500: 10de:01ee (rev c1)
0000:00:00.3 0500: 10de:01ed (rev c1)
0000:00:00.4 0500: 10de:01ec (rev c1)
0000:00:00.5 0500: 10de:01ef (rev c1)
0000:00:01.0 0601: 10de:0060 (rev a4)
0000:00:01.1 0c05: 10de:0064 (rev a2)
0000:00:02.0 0c03: 10de:0067 (rev a4)
0000:00:02.1 0c03: 10de:0067 (rev a4)
0000:00:02.2 0c03: 10de:0068 (rev a4)
0000:00:04.0 0200: 10de:0066 (rev a1)
0000:00:06.0 0401: 10de:006a (rev a1)
0000:00:08.0 0604: 10de:006c (rev a3)
0000:00:09.0 0101: 10de:0065 (rev a2)
0000:00:1e.0 0604: 10de:01e8 (rev c1)
0000:02:00.0 0300: 1002:4242
0000:02:00.1 0604: 1002:4243
0000:03:00.0 0c00: 11c1:5811 (rev 04)
lovesong:/farhome/hendrik#
lovesong:/farhome/hendrik# lspci -vnn
0000:00:00.0 0600: 10de:01e0 (rev c1)
Subsystem: 1043:80ac
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 2.0
Capabilities: [60] #08 [2001]
0000:00:00.1 0500: 10de:01ea (rev c1)
Subsystem: 1043:80ac
Flags: 66MHz, fast devsel
0000:00:00.2 0500: 10de:01ee (rev c1)
Subsystem: 1043:80ac
Flags: 66MHz, fast devsel
0000:00:00.3 0500: 10de:01ed (rev c1)
Subsystem: 1043:80ac
Flags: 66MHz, fast devsel
0000:00:00.4 0500: 10de:01ec (rev c1)
Subsystem: 1043:80ac
Flags: 66MHz, fast devsel
0000:00:00.5 0500: 10de:01ef (rev c1)
Subsystem: 1043:80ac
Flags: 66MHz, fast devsel
0000:00:01.0 0601: 10de:0060 (rev a4)
Subsystem: 1043:80ad
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [48] #08 [01e1]
0000:00:01.1 0c05: 10de:0064 (rev a2)
Subsystem: 1043:0c11
Flags: 66MHz, fast devsel, IRQ 169
I/O ports at e400 [size=32]
Capabilities: [44] Power Management version 2
0000:00:02.0 0c03: 10de:0067 (rev a4) (prog-if 10)
Subsystem: 1043:0c11
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
Memory at ef004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:02.1 0c03: 10de:0067 (rev a4) (prog-if 10)
Subsystem: 1043:0c11
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
Memory at ef005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:02.2 0c03: 10de:0068 (rev a4) (prog-if 20)
Subsystem: 1043:0c11
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 193
Memory at ef000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
0000:00:04.0 0200: 10de:0066 (rev a1)
Subsystem: 1043:80a7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
Memory at ef001000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d000 [size=8]
Capabilities: [44] Power Management version 2
0000:00:06.0 0401: 10de:006a (rev a1)
Subsystem: 1043:8095
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
I/O ports at d400 [size=256]
I/O ports at d800 [size=128]
Memory at ef002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:08.0 0604: 10de:006c (rev a3)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
0000:00:09.0 0101: 10de:0065 (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: 1043:0c11
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
0000:00:1e.0 0604: 10de:01e8 (rev c1)
Flags: bus master, 66MHz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ec000000-eeffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
0000:02:00.0 0300: 1002:4242
Subsystem: 1002:02aa
Flags: bus master, stepping, 66MHz, medium devsel, latency 32,
IRQ 201
Memory at e0000000 (32-bit, prefetchable) [size=128M]
I/O ports at c000 [size=256]
Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
Memory at ee020000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
0000:02:00.1 0604: 1002:4243
Flags: bus master, stepping, 66MHz, medium devsel, latency 32
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: ed000000-edffffff
Capabilities: [50] Power Management version 2
0000:03:00.0 0c00: 11c1:5811 (rev 04) (prog-if 10)
Subsystem: 1002:5811
Flags: bus master, medium devsel, latency 32, IRQ 201
Memory at ed000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
lovesong:/farhome/hendrik#
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [ ]
Comments/Problems:
The above output (lspci and such) was obtained from a sarge I have in
another partition: /dev/hda3. I was attempting to install etch on
/dev/hda4.
The installation went smoothly until it was time to install the boot
loader. I skipped the grub step, because this sistem has always been
booted using lilo, and I see no reason to shange now. My emergency boot
floppy contains am MBR written by lilo.
However, lilo did not work. It seemed to start OK, and advanced until
the screen said:
Installing LILO 75%
Running LILO for /dev/hda
And then nothing happened any more, although I could still switch
consoles with Ctl-alt-F2.
Eventually I rebooted to the sarge I had stashed away in /dev/hda3,
using my emergency boot floppy, and reconfigured and ran its lilo so
as to reestablish a working MBR. But although lilo ren, even with an
added stanza for the new etch system, only the old sarge system would
boot.
I was surprised during network recognition that it found me two ethernet
interfaces: the sarge system only recognises one.
-- hendrik
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---
