Package: installation-reports Severity: normal User: debian-...@lists.debian.org Usertags: kfreebsd X-Debbugs-CC: debian-...@lists.debian.org
-- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/20100828-3/kfreebsd-i386/iso-cd/debian-testing-kfreebsd-i386-netinst.iso Date: 2010-08-28 Machine: KVM 0.9.1 Partitions: <df -Tl will do; the raw partition table is preferred> Disk /dev/ad0: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b4138 Device Boot Start End Blocks Id System /dev/ad0p1 * 1 2497 20051968 a5 FreeBSD Partition 1 has different physical/logical endings: phys=(1023, 254, 63) logical=(2496, 122, 58) /dev/ad0p2 2497 2611 916481 5 Extended Partition 2 has different physical/logical beginnings (non-Linux?): phys=(1023, 254, 63) logical=(2496, 155, 26) Partition 2 has different physical/logical endings: phys=(1023, 254, 63) logical=(2610, 180, 2) /dev/ad0p5 2497 2611 916480 82 Linux swap / Solaris Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/ad0s1 ufs 19418446 3013244 14851728 17% / devfs devfs 1 1 0 100% /dev linprocfs linprocfs 4 4 0 100% /proc /sys sysfs 4 4 0 100% /sys fdescfs fdescfs 1 1 0 100% /dev/fd tmpfs tmpfs 1575252 4 1575248 1% /lib/init/rw Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [E] Comments/Problems: In the install menus the first character isn't highlighted when the item is selected. Graphical desktop install went through, although on boot gdm3 gives a black screen as reported in http://bugs.debian.org/592549 . Despite choosing UK keyboard on install still had to do 'dpkg-reconfigure kbdcontrol' and choose 'uk.iso.kbd' to get correct keymap on console. The '-k' of 'lspci -knn' doesn't work. I guess this is a Linux only option. lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] 00:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20) -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/kFreeBSD installer" DISTRIB_RELEASE="6.0 (squeeze) - installer build 20100827-10:20" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== uname -a: GNU/kFreeBSD debian-kfreebsd-i386-3 8.1-1-486 #0 Tue Aug 17 22:35:34 CEST 2010 i686 GNU/Linux lspci -knn: Usage: lspci [<switches>] lspci -knn: lspci -knn: Basic display modes: lspci -knn: -mm Produce machine-readable output (single -m for an obsolete format) lspci -knn: -t Show bus tree lspci -knn: lspci -knn: Display options: lspci -knn: -v Be verbose (-vv for very verbose) lspci -knn: -x Show hex-dump of the standard part of the config space lspci -knn: -xxx Show hex-dump of the whole config space (dangerous; root only) lspci -knn: -xxxx Show hex-dump of the 4096-byte extended config space (root only) lspci -knn: -b Bus-centric view (addresses and IRQ's as seen by the bus) lspci -knn: -D Always show domain numbers lspci -knn: lspci -knn: Resolving of device ID's to names: lspci -knn: -n Show numeric ID's lspci -knn: -nn Show both textual and numeric ID's (names & numbers) lspci -knn: -q Query the PCI ID database for unknown ID's via DNS lspci -knn: -qq As above, but re-query locally cached entries lspci -knn: -Q Query the PCI ID database for all ID's via DNS lspci -knn: lspci -knn: Selection of devices: lspci -knn: -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots lspci -knn: -d [<vendor>]:[<device>] Show only devices with specified ID's lspci -knn: lspci -knn: Other options: lspci -knn: -i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz lspci -knn: -M Enable `bus mapping' mode (dangerous; root only) lspci -knn: lspci -knn: PCI access options: lspci -knn: -A <method> Use the specified PCI access method (see `-A help' for a list) lspci -knn: -O <par>=<val> Set PCI access parameter (see `-O help' for a list) lspci -knn: -G Enable PCI access debugging lspci -knn: -F <file> Read PCI configuration dump from a given file usb-list: Error: directory /sys/bus does not exist; is sysfs mounted? kldstat: Id Refs Address Size Name kldstat: 1 5 0xc0400000 7e6000 kfreebsd.gz kldstat: 2 1 0xc6906000 10000 ext2fs.ko kldstat: 3 1 0xc727a000 4000 nullfs.ko df: Filesystem 1K-blocks Used Available Use% Mounted on df: /dev/md0 42479 29940 12539 70% / df: devfs 1 1 0 100% /dev df: devfs 1 1 0 100% /dev df: fdescfs 1 1 0 100% /dev/fd df: linprocfs 4 4 0 100% /proc df: /sys 4 4 0 100% /sys df: /dev/ad0s1 19418446 2942116 14922856 16% /target df: devfs 1 1 0 100% /dev df: linprocfs 4 4 0 100% /proc df: /sys 4 4 0 100% /sys df: devfs 1 1 0 100% /target/dev free: /usr/bin/report-hw: line 59: free: not found /proc/cmdline: BOOT_IMAGE=/kernel ro root=302 /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 7 /proc/cpuinfo: model name : QEMU Virtual CPU version 0.9.1 /proc/cpuinfo: stepping : 3 /proc/cpuinfo: flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr xmm sse2 /proc/cpuinfo: cpu MHz : 1995.01 /proc/cpuinfo: bogomips : 1995.01 /proc/meminfo: total: used: free: shared: buffers: cached: /proc/meminfo: Mem: 750157824 124813312 625344512 1916928 0 28553216 /proc/meminfo: Swap: 938475520 0 938475520 /proc/meminfo: MemTotal: 732576 kB /proc/meminfo: MemFree: 610688 kB /proc/meminfo: MemShared: 1872 kB /proc/meminfo: Buffers: 0 kB /proc/meminfo: Cached: 27884 kB /proc/meminfo: SwapTotal: 916480 kB /proc/meminfo: SwapFree: 916480 kB -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: kfreebsd-i386 (i686) Kernel: kFreeBSD 8.1-1-686 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
signature.asc
Description: OpenPGP digital signature
