Hello sorry for the informal way I report. I'm an "enduser".
I'm trying to do a network install (of testing or unstable) on a Dell Latitude 2110 via a usb stick (using the easy way with zcat boot.img.gz > /dev/sdX ... ) and I have the following early problems: 1) the versions of boot.img.gz since July Sunday 25 lead to a boot error when I try to boot on the usb stick. This was not the case on (at least some) slightly earlier boot.img.gz, that alas I did not keep. 2) assuming I start with a working boot.img.gz, I get quickly in trouble with networking. The network card is Ethernet controller: Broadcom Corporation NetXtreme BCM57760 Gigabit Ethernet PCIe (rev 01) which is supported (eg the debian live cd transfered to a usb stick works ok). However, it is not recognized during install and I suspect this is due to the fact that the modules on the installer include tg3 but neither broadcom nor libphy (which are loaded when I use the debian live cd). This may (or may not) be related to #553024. Any hint for a (not too complicated) workaround ? Or even better, some hope for a near future fix on the d-i itself ? Best regards, Michel Bauer
