2010/2/28 Otavio Salvador <ota...@ossystems.com.br>
> > > On Sat, Feb 27, 2010 at 5:48 PM, Kenneth Macdonald Karlsen < > kennethka...@gmail.com> wrote: > >> Thank you for a good answer, I can now sucessfullly install Debian. But >> now I have problems with my network. The installer (daily build dated today) >> detects my wireless card but cannot connect to a wpa2 network. In additon my >> cabled card "Broadcom NetLink Gigabit Ethernet card" is not detected by the >> installer, and if I try to modprobe bnx2 or bnx2x it does not give any good >> results with the daily build of today. >> > > Good to know that keyboard works now. > > >> Any good suggestions? >> > > Do you know if your network adaptor is suppose to work with bnx2 or bnx2x? > bnx2 is available in installer (at least in last upload today) but bnx2x > isn't. I've added bnx2x for next upload but I'll wait few days to see if no > other requests are done before uploading it. > > I was mistaken, the correct module is t3g but i needed to unload the tg3 and broadcom module, modprobe the broadcom module and then insert the tg3 module. Here is my card, Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) I also noted that the installer detected my wireless card but I was unable to connect it with wpa2 during the initial install, only wep was available. Anyhow, thanks for suggestions, Kenneth
