Your message dated Sat, 09 Jan 2010 19:51:43 +0100
with message-id <1263063103.3681.3.ca...@rbg-nb.fritz.box>
and subject line CD-Writer doesn't exist anymore
has caused the Debian Bug report #526689,
regarding Installation of lenny failed - drive not ready for command
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
526689: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=526689
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Severity: important
Boot method: CD
Image version: Self-made installation CD
Date: 2009-05-02
Machine: Self-made Desktop PC
Processor: Athlon XP 2600+
Memory: 512MB
Partitions: <df -Tl will do; the raw partition table is preferred>
Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/hdb1 ext3 19228276 4341096 13910432 24% /
tmpfs tmpfs 258144 0 258144 0% /lib/init/rw
udev tmpfs 10240 108 10132 2% /dev
tmpfs tmpfs 258144 0 258144 0% /dev/shm
/dev/hdb6 ext3 94687664 1089752 88788056 2% /home
/dev/hda5 fuseblk 14603052 921508 13681544 7% /share
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333] [1106:3099]
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] [1106:b099]
Kernel modules: shpchp
00:09.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004]
(rev 04)
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
00:09.1 Input device controller [0980]: Creative Labs SB Audigy Game Port
[1102:7003] (rev 04)
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
00:09.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port
[1102:4001] (rev 04)
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL
Video Broadcast Decoder [1131:7134] (rev 01)
Kernel driver in use: saa7134
Kernel modules: saa7134
00:0b.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI
[1814:0201] (rev 01)
Kernel driver in use: rt2500pci
Kernel modules: rt2500pci
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
82)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II]
[1106:3065] (rev 74)
Kernel driver in use: via-rhine
Kernel modules: via-rhine
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP [Radeon
9600] [1002:4150]
Kernel modules: radeonfb
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon 9600]
(Secondary) [1002:4170]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Drives:
/dev/hda: 40GB Harddisk
/dev/hdb: 120GB Harddisk
/dev/hdc: DVD-ROM
/dev/hdd: CD Writer
If i boot from DVD-ROM (/dev/hdc), loading of kernel fails with the message:
hdd: drive not ready for command
/dev/hdd is an old CD Writer:
AOpen Model No. CRW2440 Manufactured 12/2001
With etch, this CD Writer works perfectly.
If you need further informations, please let me know.
Regards
Bernhard
--- End Message ---
--- Begin Message ---
Hello,
closing this bug report, because the old AOpen CD-Writer doesn't exist
anymore.
Regards
Bernhard
--- End Message ---
