Package: partman-md
Version: 48
Severity: important
While testing #558686 I noticed a couple of issues with the RAID
configuration interface.
State after initial partitioning of physical disks:
│ IDE1 master (hda) - 4.3 GB VBOX HARDDISK │
│ > #1 primary 1.1 GB K raid │
│ > #2 primary 2.0 GB K raid │
│ > pri/log 1.2 GB FREE SPACE │
│ IDE1 slave (hdb) - 4.3 GB VBOX HARDDISK │
│ > #1 primary 1.1 GB K raid │
│ > #2 primary 2.0 GB K raid │
│ > pri/log 1.2 GB FREE SPACE │
After choosing "Configure software RAID", "Create MD device", "RAID1",
2 active devices, 0 spares, I got:
│ You have chosen to create a RAID1 array with 2 active devices. │
│ │
│ Please choose which partitions are active devices. You must select │
│ exactly 2 partitions. │
│ │
│ Active devices for the RAID1 array: │
│ │
│ [ ] /dev/hda1 (1102MB; raid) │
│ [ ] /dev/hda2 (1998MB; raid) │
│ [ ] /dev/hda free #1 (1192MB; FREE SPACE) │
│ [ ] /dev/hdb1 (1102MB; raid) │
│ [ ] /dev/hdb2 (1998MB; raid) │
│ [ ] /dev/hdb free #1 (1192MB; FREE SPACE) │
* Issue 1: displays "free space" as available for RAID
AFAIK only devices marked as "use for RAID" (that have the "raid" flag set)
should be listed.
This is a regression: the lenny installer does not display free space.
* Issue 2: dialog does not allow for creation of degraded devices
For RAID1 there is no need to select "exactly 2 partitions". partman
supports creating degraded RAID devices, for RAID1 only 1 partition is
required. The dialog should indicate this.
Some of the other RAID variants also allow creation of degraded devices.
* Issue 3: incorrect dialog when deleting RAID devices
The confirmation dialog is supposed to list the component devices of a RAID
device, but instead it shows:
│ Please confirm whether you really want to delete the following │
│ software RAID device: │
│ │
│ Device: /dev/md1 │
│ Type: raid1 │
│ Component devices: │
│ │
│ 1951808 blocks [2/2] [UU] │
│ │
│ 1076224 blocks [2/2] [UU] │
│ │
│ Really delete this software RAID device? │
And even more fun when a sync is happening:
│ Component devices: │
│ │
│ 1951808 blocks [2/2] [UU] │
│ resync=DELAYED │
│ │
│ 1076224 blocks [2/2] [UU] │
│ [============>........] resync = 62.5% (673280/1076224) │
│ finish=0.1min speed=33664K/sec │
This is a regression compared to Lenny which did display component devices
correctly. Possibly the root cause is a change in /proc/mdstat.
<snip>
# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 hdb2[1] hda2[0]
1951808 blocks [2/2] [UU]
md0 : active raid1 hdb1[1] hda1[0]
1076224 blocks [2/2] [UU]
</snip>
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
