Hallo Frans, for the first installation i used the stable staging from the debian miror. When I use the testing stage then the "mount /proc error" will not apear.
Mit freundlichen Grüßen i.A. Winfried Münch Systemingenieur zSeries PROFI Engineering Systems AG Otto-Röhm-Straße 18 D-64293 Darmstadt Tel.: +49 6151 8290-7638 Fax: +49 6151 8290-7692 Mobil: +49 163 8075134 E-Mail: w.mue...@profi-ag.de Internet: http://www.profi-ag.de PROFI Engineering Systems AG, Otto-Röhm-Straße 18, 64293 Darmstadt, Amtsgericht Darmstadt HRB 7833 Vorstandsvorsitzender: Dr.-Ing. Udo Hamm, Vorstand: Susanne Hamm, Manfred Lackner, Aufsichtsratsvorsitzender: Jürgen Wenner. Frans Pop <elen...@planet.nl> 03.08.2009 14:37 Bitte antworten an 539...@bugs.debian.org An 539...@bugs.debian.org Kopie Winfried Muench <w.mue...@profi-ag.de> Thema Re: Bug#539744: installation-reports user debian-boot@lists.debian.org usertags 539744 s390 thanks Thank you for your report. On Monday 03 August 2009, Winfried Muench wrote: > Install base system: [E] Error: "chroot /target mount -t proc proc > /proc" would not work, the Command on the Shell works fine, retry the > step after set this command on the shell was e work around. I have just done an installation on s390 (Hercules emulator) and cannot reproduce this, although we have seen that error mentioned before. Could you send us the syslog (gzipped!) and hardware-summary for your installation? They should be available in /var/log/installer on the new installed system. > Clock/timezone setup: [ ] there was no step in the installer ? not > shure. If you'd try again tomorrow or even in a few hours, the time zone will be set. I fixed that issue a few days ago :-) However, during a standard installation setting the time zone happens silently if the country only has one time zone. The system clock is not modified by the installer on s390. Cheers, FJP
