Package: installation-reports
Version: 2.38
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: debian-Lenny-DI-rc2-amd64-netinst.iso
Date: 10 Ferbuary 2009
Machine: KVM 72+dfsg-4 on debian sid
Partitions:
Disk /dev/hda: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000cc2b8
Device Boot Start End Blocks Id System
/dev/hda1 * 1 486 3903763+ 8e Linux LVM
/dev/hda2 487 1305 6578617+ 8e Linux LVM
--- Volume group ---
VG Name datas
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 5
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 4
Open LV 4
Max PV 0
Cur PV 1
Act PV 1
VG Size 6,27 GB
PE Size 4,00 MB
Total PE 1606
Alloc PE / Size 1312 / 5,12 GB
Free PE / Size 294 / 1,15 GB
VG UUID pwLChv-ruvR-ws0L-oRO6-oNUQ-oEDd-cDenQg
--- Volume group ---
VG Name system
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 10
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 5
Open LV 5
Max PV 0
Cur PV 1
Act PV 1
VG Size 3,72 GB
PE Size 4,00 MB
Total PE 953
Alloc PE / Size 953 / 3,72 GB
Free PE / Size 0 / 0
VG UUID V67an8-HLYb-aIQb-Hxcq-rtFs-FH9M-YGjNiV
--- Logical volume ---
LV Name /dev/datas/var
VG Name datas
LV UUID 1nPqMM-Dzd2-C3Lo-7xWc-WAd1-Ijaz-bY1xSw
LV Write Access read/write
LV Status available
# open 1
LV Size 1,86 GB
Current LE 476
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:5
--- Logical volume ---
LV Name /dev/datas/var-log
VG Name datas
LV UUID mj1lYo-CCVE-jlYJ-XXK1-tBJG-VSon-Hubgv0
LV Write Access read/write
LV Status available
# open 1
LV Size 488,00 MB
Current LE 122
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:6
--- Logical volume ---
LV Name /dev/datas/var-lib
VG Name datas
LV UUID G0AeVy-Esnf-gKVP-HNtx-zUei-2ok7-YDbm2b
LV Write Access read/write
LV Status available
# open 1
LV Size 952,00 MB
Current LE 238
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:7
--- Logical volume ---
LV Name /dev/datas/var-cache
VG Name datas
LV UUID njXPqz-KKY1-1YSJ-zVpO-rfYX-SP9T-14mN3n
LV Write Access read/write
LV Status available
# open 1
LV Size 1,86 GB
Current LE 476
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:8
--- Logical volume ---
LV Name /dev/system/racine
VG Name system
LV UUID RKps3s-1lDZ-hcor-cT2N-Vj7r-3zYI-tptIco
LV Write Access read/write
LV Status available
# open 1
LV Size 952,00 MB
Current LE 238
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:0
--- Logical volume ---
LV Name /dev/system/swap
VG Name system
LV UUID k0jKcJ-2VAz-Ntci-6BbR-uJ1D-IiMN-RmjS73
LV Write Access read/write
LV Status available
# open 2
LV Size 488,00 MB
Current LE 122
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:1
--- Logical volume ---
LV Name /dev/system/usr
VG Name system
LV UUID 0muiV9-r24x-sk8E-xRLM-XJNM-FB73-15Xhtd
LV Write Access read/write
LV Status available
# open 1
LV Size 952,00 MB
Current LE 238
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:2
--- Logical volume ---
LV Name /dev/system/tmp
VG Name system
LV UUID G2dBVk-XqfZ-sVxZ-deyK-0Pi8-ZjpA-TWZcfY
LV Write Access read/write
LV Status available
# open 1
LV Size 952,00 MB
Current LE 238
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:3
--- Logical volume ---
LV Name /dev/system/home
VG Name system
LV UUID yiStrS-9GGm-yDfJ-I58a-L5p1-NDcw-wOrDxc
LV Write Access read/write
LV Status available
# open 1
LV Size 468,00 MB
Current LE 117
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:4
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [E]
Comments/Problems:
When installing a full LVM system (/boot on LVM), the system
fail to boot on reboot with /dev/root no such file or directory.
Under initramfs fallback:
$ cat /proc/cmdline
BOOT_IMAGE=Linux ro root=fd00
Rebooting the system and using the following boot command works fine:
Linux ro root=/dev/mapper/system-racine
/etc/lilo.conf is ok with root=/dev/mapper/system-racine
but running lilo doesn't fix the problem, under initramfs fallback:
$ cat /proc/cmdline
BOOT_IMAGE=Linux ro root=fe00
Regards.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20090123"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux raip-orne 2.6.26-1-amd64 #1 SMP Sat Jan 10 17:57:00 UTC 2009
x86_64 unknown
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC
[Natoma] [8086:1237] (rev 02)
lspci -knn: 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA
[Natoma/Triton II] [8086:7000]
lspci -knn: 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] [8086:7010]
lspci -knn: Kernel driver in use: PIIX_IDE
lspci -knn: Kernel modules: piix
lspci -knn: 00:01.2 USB Controller [0c03]: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] [8086:7020] (rev 01)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
[8086:7113] (rev 03)
lspci -knn: 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446
[1013:00b8]
lspci -knn: 00:03.0 Ethernet controller [0200]: Qumranet, Inc. Device
[1af4:1000]
lspci -knn: Kernel driver in use: virtio-pci
lspci -knn: Kernel modules: virtio_pci
lsmod: Module Size Used by
lsmod: ufs 67720 0
lsmod: qnx4 13576 0
lsmod: ntfs 188416 0
lsmod: battery 16904 0
lsmod: dm_mod 58864 19
lsmod: md_mod 80164 0
lsmod: xfs 475432 0
lsmod: reiserfs 211072 0
lsmod: jfs 157904 0
lsmod: ext3 125072 8
lsmod: jbd 51240 1 ext3
lsmod: vfat 14848 0
lsmod: fat 50872 1 vfat
lsmod: ext2 66576 0
lsmod: mbcache 12676 2 ext3,ext2
lsmod: virtio_net 12416 0
lsmod: virtio_pci 10624 0
lsmod: virtio_ring 8064 1 virtio_pci
lsmod: virtio 9604 2 virtio_net,virtio_pci
lsmod: nls_utf8 6144 0
lsmod: isofs 35496 0
lsmod: nls_base 12932 6 ntfs,jfs,vfat,fat,nls_utf8,isofs
lsmod: zlib_inflate 18688 1 isofs
lsmod: usb_storage 93888 0
lsmod: scsi_mod 160248 1 usb_storage
lsmod: fan 9224 0
lsmod: ide_cd_mod 36232 0
lsmod: cdrom 37800 1 ide_cd_mod
lsmod: ide_disk 16512 3
lsmod: parport_pc 30888 0
lsmod: parport 41520 1 parport_pc
lsmod: floppy 61544 0
lsmod: uhci_hcd 25632 0
lsmod: piix 12296 0 [permanent]
lsmod: ide_core 127772 3 ide_cd_mod,ide_disk,piix
lsmod: thermal 22560 0
lsmod: processor 42048 1 thermal
lsmod: thermal_sys 17600 3 fan,thermal,processor
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 255344 24 255320 0% /dev
df: /dev/mapper/system-racine
df: 959512 137120 773652 15% /target
df: /dev/mapper/system-home
df: 464100 10550 429589 2% /target/home
df: /dev/mapper/system-tmp
df: 959512 17608 893164 2% /target/tmp
df: /dev/mapper/system-usr
df: 959512 277836 632936 31% /target/usr
df: /dev/mapper/datas-var
df: 1919048 35760 1785804 2% /target/var
df: /dev/mapper/datas-var--cache
df: 1919048 159572 1661992 9% /target/var/cache
df: /dev/mapper/datas-var--lib
df: 959512 82920 827852 9% /target/var/lib
df: /dev/mapper/datas-var--log
df: 483946 11911 447050 3% /target/var/log
df: /dev/mapper/system-racine
df: 959512 137120 773652 15% /dev/.static/dev
df: tmpfs 255344 24 255320 0% /target/dev
free: total used free shared buffers
free: Mem: 510688 442656 68032 0 36656
free: Swap: 499704 0 499704
free: Total: 1010392 442656 567736
/proc/cmdline: priority=low vga=normal initrd=/install.amd/initrd.gz --
vga=0x318 BOOT_IMAGE=/install.amd/vmlinuz
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 2
/proc/cpuinfo: model name : QEMU Virtual CPU version 0.9.1
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 1662.508
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx lm up rep_good pni
/proc/cpuinfo: bogomips : 3333.55
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0071 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:01.1
/proc/ioports: 0170-0177 : PIIX3
/proc/ioports: 01f0-01f7 : 0000:00:01.1
/proc/ioports: 01f0-01f7 : PIIX3
/proc/ioports: 0376-0376 : 0000:00:01.1
/proc/ioports: 0376-0376 : PIIX3
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : 0000:00:01.1
/proc/ioports: 03f6-03f6 : PIIX3
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: afe0-afe3 : ACPI GPE0_BLK
/proc/ioports: b000-b03f : 0000:00:01.3
/proc/ioports: b000-b003 : ACPI PM1a_EVT_BLK
/proc/ioports: b004-b005 : ACPI PM1a_CNT_BLK
/proc/ioports: b008-b00b : ACPI PM_TMR
/proc/ioports: b100-b10f : 0000:00:01.3
/proc/ioports: c000-c00f : 0000:00:01.1
/proc/ioports: c000-c00f : PIIX3
/proc/ioports: c020-c03f : 0000:00:01.2
/proc/ioports: c020-c03f : uhci_hcd
/proc/ioports: c040-c05f : 0000:00:03.0
/proc/ioports: c040-c05f : virtio-pci
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000e8000-000fffff : reserved
/proc/iomem: 00100000-1ffeffff : System RAM
/proc/iomem: 00200000-0042cbda : Kernel code
/proc/iomem: 0042cbdb-0053b6f7 : Kernel data
/proc/iomem: 005e0000-00675397 : Kernel bss
/proc/iomem: 1fff0000-1fffffff : ACPI Tables
/proc/iomem: f0000000-f1ffffff : 0000:00:02.0
/proc/iomem: f0000000-f03fffff : vesafb
/proc/iomem: f2000000-f2000fff : 0000:00:02.0
/proc/iomem: fec00000-fec00fff : IOAPIC 0
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem: fffbd000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 71 IO-APIC-edge timer
/proc/interrupts: 1: 1518 IO-APIC-edge i8042
/proc/interrupts: 6: 2 IO-APIC-edge floppy
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 8: 0 IO-APIC-edge rtc0
/proc/interrupts: 9: 0 IO-APIC-fasteoi acpi
/proc/interrupts: 10: 56913 IO-APIC-fasteoi virtio0
/proc/interrupts: 11: 0 IO-APIC-fasteoi uhci_hcd:usb1
/proc/interrupts: 12: 2 IO-APIC-edge i8042
/proc/interrupts: 14: 42520 IO-APIC-edge ide0
/proc/interrupts: 15: 13245 IO-APIC-edge ide1
/proc/interrupts: NMI: 0 Non-maskable interrupts
/proc/interrupts: LOC: 103522 Local timer interrupts
/proc/interrupts: RES: 0 Rescheduling interrupts
/proc/interrupts: CAL: 0 function call interrupts
/proc/interrupts: TLB: 0 TLB shootdowns
/proc/interrupts: TRM: 0 Thermal event interrupts
/proc/interrupts: THR: 0 Threshold APIC interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: ERR: 0
/proc/meminfo: MemTotal: 510688 kB
/proc/meminfo: MemFree: 68040 kB
/proc/meminfo: Buffers: 36656 kB
/proc/meminfo: Cached: 346492 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 103156 kB
/proc/meminfo: Inactive: 286436 kB
/proc/meminfo: SwapTotal: 499704 kB
/proc/meminfo: SwapFree: 499704 kB
/proc/meminfo: Dirty: 2492 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 6472 kB
/proc/meminfo: Mapped: 2304 kB
/proc/meminfo: Slab: 43532 kB
/proc/meminfo: SReclaimable: 35748 kB
/proc/meminfo: SUnreclaim: 7784 kB
/proc/meminfo: PageTables: 612 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 755048 kB
/proc/meminfo: Committed_AS: 9824 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 8752 kB
/proc/meminfo: VmallocChunk: 34359729595 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 2048 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff
fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.0.0-6 Linux PCI Utilities
ii reportbug 3.48 reports bugs in the Debian distrib
installation-report suggests no packages.
-- no debconf information
# Automatically added by lilo postinst script
large-memory
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# --------------- `install-mbr(8)', `/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.
# +---------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes to this |
# | conffile, `/boot/bootmess.txt' (if you have created it), or |
# | install a new kernel. The computer will most likely fail to |
# | boot if a kernel-image post-install script or you don't |
# | remember to run `lilo'. |
# | |
# +---------------------------------------------------------------+
# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/hda
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/mapper/system-racine
# This option may be needed for some software RAID installs.
#
# raid-extra-boot=mbr-only
# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller. Using `compact' is especially recommended when
# booting from a floppy disk. It is disabled here by default
# because it doesn't always work.
#
# compact
# Installs the specified file as the new boot sector
# You have the choice between: text, bmp, and menu
# Look in lilo.conf(5) manpage for details
#
#install=menu
# Specifies the location of the map file
#
map=/boot/map
# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration. If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well. Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20
# You can put a customized boot message up if you like. If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress. `single-key' goes with the `alias' lines in the
# `image' configurations below. eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
# prompt
# delay=100
# timeout=100
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>)
#
# vga=ask
# vga=9
#
vga=0x318
# Kernel command line options that apply to all installed images go
# here. See: The `boot-prompt-HOWTO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""
# If you used a serial console to install Debian, this option should be
# enabled by default.
# serial=
#
# Boot up Linux by default.
#
default=Linux
image=/vmlinuz
label=Linux
read-only
# restricted
# alias=1
initrd=/initrd.img
image=/vmlinuz.old
label=LinuxOLD
read-only
optional
# restricted
# alias=2
initrd=/initrd.img.old
# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
# other=/dev/hda4
# label=HURD
# restricted
# alias=3
