Package: installation-reports Boot method: Network (PXE) Image version: Lenny RC2 http://ftp.nl.debian.org/debian/dists/testing/main/installer-i386/current/images/netboot/netboot.tar.gz Date: 2009-02-05
Machine: Fit-PC 1.0 http://www.fit-pc.com/new/fit-pc-1-0-specifications.html Processor: Geode LX800 (x86 compatible) Memory: 256MB Partitions: Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 7210 57914293+ 83 Linux /dev/hda2 7211 7296 690795 5 Extended /dev/hda5 7211 7296 690763+ 82 Linux swap / Solaris Output of lspci -knn (or lspci -nn): 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33) 00:01.1 VGA compatible controller [0300]: Advanced Micro Devices [AMD] Geode LX Video [1022:2081] 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] Kernel driver in use: Geode LX AES Kernel modules: geode-rng, geode-aes 00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 00:0e.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) Kernel modules: cs5535_gpio 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) Kernel driver in use: AMD_IDE Kernel modules: amd74xx 00:0f.3 Multimedia audio controller [0401]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01) Kernel driver in use: cs5535audio Kernel modules: snd-cs5535audio 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [ ] Install boot loader: [O] Overall install: [O] Comments/Problems: Although the installer claimed to put the active ethernet device first (when asking me to choose a device), it actually put the inactive port (eth0) first. I believe both ports are controlled by the same hardware device, so this isn't particularly unexpected. Other than that, the install went well. I quite enjoyed the 'netboot' install. My previous installs were 'floppy', which isn't nearly as much fun. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
