Package: installation-reports
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/lenny_di_rc1/i386/jigdo-cd/
Date: Saturday January 3rd, 2009
Machine: Airis 686
Processor:2x Intel Pentium 4/2600MHz
Memory: 768 MBytes
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hdb1 ext3 113141448 2192560 105201636 3% /
tmpfs tmpfs 387972 0 387972 0% /lib/init/rw
udev tmpfs 10240 104 10136 2% /dev
tmpfs tmpfs 387972 0 387972 0% /dev/shm
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 645xx [1039:0648]
(rev 50)
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge) [1039:0003]
Kernel modules: shpchp
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL
Media IO] [1039:0963] (rev 25)
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus
Controller [1039:0016]
Kernel driver in use: sis96x_smbus
Kernel modules: i2c-sis96x
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513]
Kernel driver in use: SIS_IDE
Kernel modules: sis5513
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS]
AC'97 Sound Controller [1039:7012] (rev a0)
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f)
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f)
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0
Controller [1039:7002]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet [1039:0900] (rev 91)
Kernel driver in use: sis900
Kernel modules: sis900
00:0b.0 Modem [0703]: ALi Corporation SmartLink SmartPCI561 56K Modem
[10b9:5459]
Kernel driver in use: serial
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX
5200] [10de:0322] (rev a1)
Kernel modules: nvidiafb
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Everything worked just fine. I think the installer (text-mode, not graphical)
did a great job. I installed Lenny on a slave drive and it detected Etch on the
master drive without problems.
My impression was that the process was faster than on other occasions. In short
I'll try installing it on my laptop. I'll report. Congratulations!!!
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
