Your message dated Wed, 5 Nov 2008 21:57:27 +0100
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#504335: Lenny install report on HP Pavilion tx2530es
has caused the Debian Bug report #504335,
regarding Lenny install report on HP Pavilion tx2530es
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
504335: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=504335
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: installation-reports
Boot method: Network install from CD
Image version: Can't remember, dayly build Nov 16th morning (CET)
Date: Nov 16th, started 12:55 CET
Machine: HP Pavilion TX2530es
Processor: AMD Turion
Memory: 3 GB
Partitions:
cfdisk (util-linux-ng 2.13.1.1)
Disk Drive: /dev/sda
Size: 250059350016 bytes, 250.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 30401
Name Flags Part Type FS Type [Label] Size (MB)
------------------------------------------------------------------------------
sda1 Boot Primary NTFS [] 140800.35
sda3 Primary Linux ext3 97280.39
sda5 Logical Linux swap / Solaris 2714.35
Logical Free Space 4.12*
sda2 Primary NTFS [] 9256.83*
Unusable 0.73*
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host
Bridge [1022:9600]
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
PCI bridge (int gfx) [1022:9602]
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
PCI bridge (PCIE port 0) [1022:9604]
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
PCI bridge (PCIE port 1) [1022:9605]
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
PCI bridge (PCIE port 2) [1022:9606]
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] [1002:4391]
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
Controller [1002:4398]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
EHCI Controller [1002:4396]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
Controller [1002:4398]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
EHCI Controller [1002:4396]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
[1002:4385] (rev 3a)
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE
Controller [1002:439c]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
HDA) [1002:4383]
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
controller [1002:439d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
Bridge [1002:4384]
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI2 Controller [1002:4399]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
HyperTransport Configuration [1022:1300] (rev 40)
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
Address Map [1022:1301]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
DRAM Controller [1022:1302]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
Miscellaneous Control [1022:1303]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
Link Control [1022:1304]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc
RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612]
Kernel modules: fglrx
08:00.0 Network controller [0280]: Broadcom Corporation BCM4322
802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)
Kernel driver in use: wl
Kernel modules: wl
09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
02)
Kernel driver in use: r8169
Kernel modules: r8169
Drivers wl and fglrx have been installed after installation.
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
PROBLEMS:
- Installation didn't setup CPU frequency control. Quite important for
a laptop, had to install by hand and force powernow_k8 module load.
Had some problems tuning for a "ondemand" setup on both cores.
- Wireless doesn't work with kernel driver bcm43xx. Installed
Broadcomm's closed source binary driver and works perfectly:
http://www.broadcom.com/support/802.11/linux_sta.php
- Sound not working. Fix is to add two lines to /etc/modprobe.d/alsa-base:
options snd-cmipci mpu_port=0x330 fm_port=0x388
options snd-hda-intel index=0 model=toshiba position_fix=1
(yes toshiba model in a HP laptop :) ).
- Wacom tablet not working. Needs linuxwacom 0.8.1.0-5, debian is
shipping 0.7.x for now. Manual installation works ok. Configuration is
very tricky, some kind of help from the installer will be very
appreciatted here.
- PC Speaker sux big time beeping very loudly, had to blacklist
- Problems with external monitor, if external res. is wider than 1280.
Seems X radeon driver problem, Follow up in
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503664
- Buttons for DVD player launch and image rotation don't work out-of-the-box.
- Monitor out activation combination does not work (Fn+F4)
- When changing laptop to tablet mode, image does not rotate 180ยบ
automatically (and xrandr seems to crash if tried by hand)
- Remote control does not work
OK:
Keyboard, touchpad, volume buttons (except when mute color doesn't
change from blue to red/orange like on windows), webcam, usb ports,
play/fw/rw buttons.
NOT TESTED:
Thumbnail reader
Flash card reader seems correctly detected, didn't test it.
S-VHS output
Just reply if I can help with further tests.
Thanks a lot for all your hard work.
Eneko.
--- End Message ---
--- Begin Message ---
On Sunday 02 November 2008, Eneko Lacunza wrote:
> Comments/Problems:
> PROBLEMS:
[...]
None of the problems you mention are considered to be inside the scope of
the installer. From our point of view this was a completely successful
installation and therefore I'm closing your report. Thanks a lot for
submitting it and good luck with the new system.
> - Sound not working. Fix is to add two lines to
> /etc/modprobe.d/alsa-base:
> options snd-cmipci mpu_port=0x330 fm_port=0x388
> options snd-hda-intel index=0 model=toshiba position_fix=1
This sounds like a kernel bug. If you want to follow up on this, your best
bet is to report it to the upstream kernel developers for the alsa
driver.
Cheers,
FJP
--- End Message ---
