Your message dated Tue, 28 Oct 2008 13:28:28 +0100
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#503818: installation-reports: Installation Report on VM
has caused the Debian Bug report #503818,
regarding installation-reports: Installation Report on VM
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
503818: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503818
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: network
Image version:
http://people.debian.org/~aba/d-i/images/20081021-10:51/netboot/debian-installer/amd64/
Date: 20081028
Machine: virtual machine (ESX3.5)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Looks ok as far as I can see. Keep up the good work!
I'm using "reportbug installation-reports" to send this report, so I hope
you'll get everything you need. I didn't know what severity to choose so I
took normal. Could you please document here
http://www.debian.org/releases/lenny/amd64/ch05s03.html.en#submit-bug
what severity people should choose for reports about successfull installation?
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20081022-23:00"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux mariodevel 2.6.26-1-amd64 #1 SMP Thu Oct 9 14:16:53 UTC 2008
x86_64 unknown
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX -
82443BX/ZX/DX Host bridge [8086:7190] (rev 01)
lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX -
82443BX/ZX/DX AGP bridge [8086:7191] (rev 01)
lspci -knn: 00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4
ISA [8086:7110] (rev 08)
lspci -knn: 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4
IDE [8086:7111] (rev 01)
lspci -knn: Kernel driver in use: PIIX_IDE
lspci -knn: Kernel modules: piix
lspci -knn: 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
[8086:7113] (rev 08)
lspci -knn: 00:0f.0 VGA compatible controller [0300]: VMware Inc Abstract SVGA
II Adapter [15ad:0405]
lspci -knn: 00:10.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic
53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 01)
lspci -knn: Kernel driver in use: mptspi
lspci -knn: Kernel modules: mptspi
lspci -knn: 00:11.0 Ethernet controller [0200]: Intel Corporation 82545EM
Gigabit Ethernet Controller (Copper) [8086:100f] (rev 01)
lspci -knn: Kernel driver in use: e1000
lspci -knn: Kernel modules: e1000
lsmod: Module Size Used by
lsmod: ufs 67720 0
lsmod: qnx4 13576 0
lsmod: ntfs 188544 0
lsmod: battery 16904 0
lsmod: dm_mod 58864 16
lsmod: md_mod 80164 0
lsmod: xfs 475432 0
lsmod: reiserfs 211072 0
lsmod: jfs 157904 0
lsmod: ext3 124688 8
lsmod: jbd 51240 1 ext3
lsmod: vfat 14848 0
lsmod: fat 50872 1 vfat
lsmod: nls_base 12932 4 ntfs,jfs,vfat,fat
lsmod: ext2 66448 0
lsmod: mbcache 12676 2 ext3,ext2
lsmod: sd_mod 29248 4
lsmod: ide_cd_mod 36360 0
lsmod: cdrom 37928 1 ide_cd_mod
lsmod: mptspi 19344 3
lsmod: mptscsih 29568 1 mptspi
lsmod: mptbase 62052 2 mptspi,mptscsih
lsmod: scsi_transport_spi 29568 1 mptspi
lsmod: piix 12424 0 [permanent]
lsmod: ide_core 127772 2 ide_cd_mod,piix
lsmod: usb_storage 93760 0
lsmod: scsi_mod 160248 5
sd_mod,mptspi,mptscsih,scsi_transport_spi,usb_storage
lsmod: vga16fb 16408 2
lsmod: vgastate 12672 1 vga16fb
lsmod: fan 9224 0
lsmod: e1000 117056 0
lsmod: thermal 22560 0
lsmod: processor 42048 1 thermal
lsmod: thermal_sys 17600 3 fan,thermal,processor
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 514716 28 514688 0% /dev
df: /dev/sda2 482246 129243 328103 28% /target
df: /dev/sda1 241116 23039 205629 10% /target/boot
df: /dev/mapper/mariodevel-home
df: 472036 10550 437115 2% /target/home
df: /dev/mapper/mariodevel-opt
df: 186427 5663 171139 3% /target/opt
df: /dev/mapper/mariodevel-srv
df: 27761 1376 24952 5% /target/srv
df: /dev/mapper/mariodevel-tmp
df: 281611 10293 256778 4% /target/tmp
df: /dev/mapper/mariodevel-usr
df: 2951120 2342596 458612 84% /target/usr
df: /dev/mapper/mariodevel-var
df: 1475568 1092064 308548 78% /target/var
df: /dev/sda2 482246 129243 328103 28% /dev/.static/dev
df: tmpfs 514716 28 514688 0% /target/dev
free: total used free shared buffers
free: Mem: 1029436 946500 82936 0 83532
free: Swap: 999416 0 999416
free: Total: 2028852 946500 1082352
/proc/cmdline: initrd=debian/lenny/initrd.gz auto-install/enable=true
preseed/url=10.65.115.183 BOOT_IMAGE=debian/lenny/linux
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 65
/proc/cpuinfo: model name : Dual-Core AMD Opteron(tm) Processor 8222 SE
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 3013.889
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep
mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext
fxsr_opt rdtscp lm 3dnowext 3dnow up rep_good pni cx16 lahf_lm
/proc/cpuinfo: bogomips : 6032.51
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts fid vid ttp tm stc
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0071 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:07.1
/proc/ioports: 0170-0177 : PIIX4
/proc/ioports: 01f0-01f7 : 0000:00:07.1
/proc/ioports: 01f0-01f7 : PIIX4
/proc/ioports: 0376-0376 : 0000:00:07.1
/proc/ioports: 0376-0376 : PIIX4
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : 0000:00:07.1
/proc/ioports: 03f6-03f6 : PIIX4
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-103f : 0000:00:07.3
/proc/ioports: 1000-103f : pnp 00:01
/proc/ioports: 1000-1003 : ACPI PM1a_EVT_BLK
/proc/ioports: 1004-1005 : ACPI PM1a_CNT_BLK
/proc/ioports: 1008-100b : ACPI PM_TMR
/proc/ioports: 100c-100f : ACPI GPE0_BLK
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1040-104f : 0000:00:07.3
/proc/ioports: 1040-104f : pnp 00:01
/proc/ioports: 1050-105f : 0000:00:07.1
/proc/ioports: 1050-105f : PIIX4
/proc/ioports: 1060-106f : 0000:00:0f.0
/proc/ioports: 1070-1077 : 0000:00:11.0
/proc/ioports: 1070-1077 : e1000
/proc/ioports: 1080-10ff : 0000:00:10.0
/proc/iomem: 00000000-0009f3ff : System RAM
/proc/iomem: 0009f400-0009ffff : reserved
/proc/iomem: 000ca000-000cbfff : reserved
/proc/iomem: 000dc000-000fffff : reserved
/proc/iomem: 00100000-3feeffff : System RAM
/proc/iomem: 00200000-0042c6ba : Kernel code
/proc/iomem: 0042c6bb-0053a677 : Kernel data
/proc/iomem: 005de000-00673397 : Kernel bss
/proc/iomem: 3fef0000-3fefefff : ACPI Tables
/proc/iomem: 3feff000-3fefffff : ACPI Non-volatile Storage
/proc/iomem: 3ff00000-3fffffff : System RAM
/proc/iomem: 50000000-5000ffff : 0000:00:11.0
/proc/iomem: 50010000-50017fff : 0000:00:0f.0
/proc/iomem: 50018000-5001bfff : 0000:00:10.0
/proc/iomem: f4000000-f47fffff : 0000:00:0f.0
/proc/iomem: f4800000-f480ffff : 0000:00:11.0
/proc/iomem: f4800000-f480ffff : e1000
/proc/iomem: f4810000-f4810fff : 0000:00:10.0
/proc/iomem: f4810000-f4810fff : mpt
/proc/iomem: f4820000-f483ffff : 0000:00:11.0
/proc/iomem: f4820000-f483ffff : e1000
/proc/iomem: f8000000-fbffffff : 0000:00:0f.0
/proc/iomem: fec00000-fec0ffff : reserved
/proc/iomem: fec00000-fec00fff : IOAPIC 0
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: fffe0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 37 IO-APIC-edge timer
/proc/interrupts: 1: 110 IO-APIC-edge i8042
/proc/interrupts: 8: 0 IO-APIC-edge rtc0
/proc/interrupts: 9: 0 IO-APIC-fasteoi acpi
/proc/interrupts: 12: 3 IO-APIC-edge i8042
/proc/interrupts: 14: 385 IO-APIC-edge ide0
/proc/interrupts: 17: 154634 IO-APIC-fasteoi ioc0
/proc/interrupts: 18: 163287 IO-APIC-fasteoi eth0
/proc/interrupts: NMI: 0 Non-maskable interrupts
/proc/interrupts: LOC: 154632 Local timer interrupts
/proc/interrupts: RES: 0 Rescheduling interrupts
/proc/interrupts: CAL: 0 function call interrupts
/proc/interrupts: TLB: 0 TLB shootdowns
/proc/interrupts: TRM: 0 Thermal event interrupts
/proc/interrupts: THR: 0 Threshold APIC interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: ERR: 0
/proc/meminfo: MemTotal: 1029436 kB
/proc/meminfo: MemFree: 82936 kB
/proc/meminfo: Buffers: 83532 kB
/proc/meminfo: Cached: 761516 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 252468 kB
/proc/meminfo: Inactive: 603772 kB
/proc/meminfo: SwapTotal: 999416 kB
/proc/meminfo: SwapFree: 999416 kB
/proc/meminfo: Dirty: 2136 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 11188 kB
/proc/meminfo: Mapped: 2284 kB
/proc/meminfo: Slab: 73900 kB
/proc/meminfo: SReclaimable: 65452 kB
/proc/meminfo: SUnreclaim: 8448 kB
/proc/meminfo: PageTables: 600 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 1514132 kB
/proc/meminfo: Committed_AS: 14432 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 11624 kB
/proc/meminfo: VmallocChunk: 34359726719 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 2048 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff
fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
--- End Message ---
--- Begin Message ---
On Tuesday 28 October 2008, root wrote:
> Comments/Problems:
> Looks ok as far as I can see. Keep up the good work!
Great. As the install was successful, I'm closing your report. Thanks for
submitting it.
> I'm using "reportbug installation-reports" to send this report, so I
> hope you'll get everything you need. I didn't know what severity to
> choose so I took normal.
Normal it should be and that seems logical to me in absence of specific
instructions. I don't really see a need to document that.
Cheers,
FJP
--- End Message ---
