Package: installation-reports Boot method: network PXE Image version: daily build GTK image (20081002-19:07) Used image: http://people.debian.org/~joeyh/d-i/images/daily/netboot/gtk/netboot.tar.gz Date: 20081003
Machine: ASUS Notebook Z7750 Processor: Pentium M 1,6GHz Memory: 512MB Partitions: > RBG-NB:/home/bernhard# df -Tl > Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf > /dev/hda1 ext3 6728280 3864160 2522340 61% / > tmpfs tmpfs 257800 0 257800 0% /lib/init/rw > udev tmpfs 10240 92 10148 1% /dev > tmpfs tmpfs 257800 0 257800 0% /dev/shm > /dev/hda6 ext3 49469608 202808 46753836 1% /home > RBG-NB:/home/bernhard# Output of lspci -knn: > RBG-NB:/home/bernhard# lspci -knn > 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O > Controller [8086:3340] (rev 21) > Kernel driver in use: agpgart-intel > Kernel modules: intel-agp > 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP > Controller [8086:3341] (rev 21) > Kernel modules: shpchp > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) > USB2 EHCI Controller [8086:24cd] (rev 03) > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge > [8086:2448] (rev 83) > Kernel modules: shpchp > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface > Bridge [8086:24cc] (rev 03) > Kernel modules: iTCO_wdt, intel-rng > 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE > Controller [8086:24ca] (rev 03) > Kernel driver in use: PIIX_IDE > Kernel modules: piix > 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) > SMBus Controller [8086:24c3] (rev 03) > Kernel driver in use: i801_smbus > Kernel modules: i2c-i801 > 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03) > Kernel driver in use: Intel ICH > Kernel modules: snd-intel8x0 > 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) > AC'97 Modem Controller [8086:24c6] (rev 03) > Kernel driver in use: Intel ICH Modem > Kernel modules: snd-intel8x0m > 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 > [Mobility Radeon 9600 M10] [1002:4e50] > Kernel modules: radeonfb > 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 > Gigabit Ethernet [14e4:169c] (rev 03) > Kernel driver in use: tg3 > Kernel modules: tg3 > 02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac) > Kernel driver in use: yenta_cardbus > Kernel modules: yenta_socket > 02:01.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac) > Kernel driver in use: yenta_cardbus > Kernel modules: yenta_socket > 02:01.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller > [1180:0552] (rev 04) > Kernel driver in use: ohci1394 > Kernel modules: ohci1394 > 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG > Network Connection [8086:4220] (rev 05) > Kernel driver in use: ipw2200 > Kernel modules: ipw2200 > RBG-NB:/home/bernhard# > Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] (i didn't try it, because the installation was completely done over network) Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: Immediately after Installation, there were updates available. Here, the output of dist-upgrade: > RBG-NB:/home/bernhard# apt-get dist-upgrade > Paketlisten werden gelesen... Fertig > Abhängigkeitsbaum wird aufgebaut > Lese Status-Informationen ein... Fertig > Berechne Upgrade ...Fertig > Die folgenden NEUEN Pakete werden installiert: > esound-clients perl-doc > 0 aktualisiert, 2 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. > Es müssen 8256kB an Archiven heruntergeladen werden. > Nach dieser Operation werden 14,2MB Plattenplatz zusätzlich benutzt. > Möchten Sie fortfahren [J/n]? J > Hole:1 ftp://192.168.2.1 lenny/main esound-clients 0.2.36-3 [35,5kB] > Hole:2 ftp://192.168.2.1 lenny/main perl-doc 5.10.0-14 [8220kB] > Es wurden 8256kB in 15s geholt (529kB/s) > > Wähle vormals abgewähltes Paket esound-clients. > (Lese Datenbank ... 105977 Dateien und Verzeichnisse sind derzeit > installiert.) > Entpacke esound-clients (aus .../esound-clients_0.2.36-3_i386.deb) ... > Wähle vormals abgewähltes Paket perl-doc. > Entpacke perl-doc (aus .../perl-doc_5.10.0-14_all.deb) ... > Füge »diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc« > hinzu > Verarbeite Trigger für man-db ... > Richte esound-clients ein (0.2.36-3) ... > Richte perl-doc ein (5.10.0-14) ... > RBG-NB:/home/bernhard# Because, the updates are available on my local mirror (see IP-address 192.168.2.1), it is possible to install the actual packages during installation. For example: If you look at packages.debian.org, the package esound-clients was migrated to testing at the beginning of 2006. Because this is a minor issue, you can ignore this or not. I will do an dist-upgrade immediately after installation and all is fine. But it looks better to have an up-to-date system after installation. If you need more information, please let me know. Regards Bernhard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
