Package: installation-reports Boot method: CD (IDE cd-rom)
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso Daily-Build: "Sat Sep 20 09:01:29 UTC 2008" "Binary-1 20080920-09:00" md5 = "3292bf5fc49bbed9cf53d4f0dc945fed" Date: 2008-09-20 Machine: Processor: AMD Athlon(tm) Dual Core Processor 4850e (2x 2,5 GHz) Mainboard: Gigabyte GA-MA78GM-S2H (BIOS version: F5) Memory: Kingston KVR800D2N5K2/4G (4 GB, DDR2-800, Kingston ValueRAM) HDD: 4x Western Digital WD1000FYPS (1 TB, SATA) (ahci) Partitions: /dev/mapper/vglenny-lvlenny ext3 6732764 678892 5711856 11% / tmpfs tmpfs 1966588 0 1966588 0% /lib/init/rw udev tmpfs 10240 196 10044 2% /dev tmpfs tmpfs 1966588 0 1966588 0% /dev/shm /dev/md0 ext3 233225 16845 204339 8% /boot /dev/mapper/vgsrv-lvsrv ext3 2865558976 2122709744 713736832 75% /srv Output of lspci -knn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] Kernel modules: shpchp 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609] Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a) Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] Kernel driver in use: ATIIXP_IDE Kernel modules: atiixp, ide-pci-generic, ata_generic 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3200 Graphics [1002:9610] 01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Kernel driver in use: r8169 Kernel modules: r8169 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: ## 1) language bug I choose german for the installation and i discover english messages during the raid-config. ("The RAID1 array will consist of both..." & "You have choosen to create a RAID1...") But, I tried it again with the Daily Build of today (Tue Sep 23 09:33:05 UTC 2008) and there was everything in german. (I tested the i386-Version. I can't check the amd64-version.) ## 2) softreset failed (device not ready) At the boot of Debian i got "softreset failed..." messages: ... [ 3.732525] scsi0 : ahci [ 3.732525] scsi1 : ahci [ 3.732525] scsi2 : ahci [ 3.732526] scsi3 : ahci [ 3.732526] scsi4 : ahci [ 3.732526] scsi5 : ahci [ 3.732526] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfe02f100 irq 1277 [ 3.732526] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfe02f180 irq 1277 [ 3.732526] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfe02f200 irq 1277 [ 3.732526] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfe02f280 irq 1277 [ 3.732526] ata5: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfe02f300 irq 1277 [ 3.732526] ata6: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfe02f380 irq 1277 [ 4.326434] ata1: softreset failed (device not ready) [ 4.326526] ata1: failed due to HW bug, retry pmp=0 [ 4.490430] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.496603] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 4.496603] ata1.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 4.496603] ata1.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.496603] ata1.00: configured for UDMA/133 [ 5.098073] ata2: softreset failed (device not ready) [ 5.098158] ata2: failed due to HW bug, retry pmp=0 [ 5.261922] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.276979] ata2.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 5.276979] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.276979] ata2.00: configured for UDMA/133 [ 5.898067] ata3: softreset failed (device not ready) [ 5.898153] ata3: failed due to HW bug, retry pmp=0 [ 6.114055] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.129385] ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 6.129385] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.129385] ata3.00: configured for UDMA/133 [ 6.614048] ata4: softreset failed (device not ready) [ 6.614134] ata4: failed due to HW bug, retry pmp=0 [ 6.778065] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.793658] ata4.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 6.793658] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.793658] ata4.00: configured for UDMA/133 [ 7.234041] ata5: SATA link down (SStatus 0 SControl 300) [ 7.556940] ata6: SATA link down (SStatus 0 SControl 300) [ 7.556916] scsi 0:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.556916] scsi 1:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.556916] scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 7.556916] scsi 3:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 ... /proc/version Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008 With the Kernel "2.6.25" i didn't get these messages. I uploaded about 2 TB of data on this machine and I don't get a soft-reset during the upload. I discover this only at the boot. ## 3) raid resync Is it necessary to resync the new raid _at_ the installation? It took more than 12 hours to check my software-raid. Sep 20 20:41:43 mdcfg: mdadm: array /dev/md2 started. Sep 21 08:54:00 kernel: [50499.929621] md: md2: resync done. (Normally I don't wait at the installation until the raid resync is done.) ## 4) At the boot of Debian i got this warning (?): ... Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM ... #### If you need more informations, please contact me. Thank you! -- http://kaoso.org/impressum.xhtml
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
