Package: installation-reports Severity: critical Justification: breaks the whole system
(I was asked to file this with reportbug after posting on the debian-laptop mailing list, so some of this text is re-purposed.) A few days ago I purchased an Acer Extensa 4420-5963 laptop at retail for USD$400. The somewhat stale lenny netinst disc I had lying around did not detect any of the laptop's network hardware, so I could not proceed. Hoping that a newer build would help, I downloaded a daily build of lenny netinst. But this would hang upon boot with errors similar to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/252041 With the kernel boot options "noapic" and "nolapic", I was able to get the installer to boot and recognize at least the wired ethernet, and then successfully installed lenny. The resulting system hung on boot unless also provided with acpi=off, but there were warnings about pnpbios stuff. The laptop works fine after that. I usually build a kernel package with the latest stable RT (realtime) patches from kernel.org, because of the multimedia work I do. I also read somewhere that more recent kernels had helped. So I built linux-2.6.26.5-rt8 with the make-kpkg tools and installed that. It works, but still must have "acpi=off" in order to boot successfully, and still gives pnpbios warnings. See complete dmesg output at bottom of this email. ALSA seems to work fine, I'm listening to Ahmad Jamal through the laptop's speakers. The SD card slot seems not to work. It detects the SD card, but nothing else happens; it does not get assigned a /dev/sdX Sep 10 20:19:13 monad kernel: [24428.378942] mmc0: new SD card at address e624 Sep 10 20:19:13 monad kernel: [24428.447325] mmcblk0: mmc0:e624 SD02G 1985024KiB Sep 10 20:19:13 monad kernel: [24428.447385] mmcblk0: p1 Sep 10 20:19:50 monad kernel: [24465.481451] mmc0: card e624 removed This is a pretty decent laptop for the price. It's a dual-core athlon 64 with 2gb of ram and a radeon graphics card. I like the keyboard layout and feel... very "snappy". The rows of keys are slightly curved, like the Logitech Wave keyboard. I've not yet seen that on a laptop and I like it. The touchpad is in a good spot, and is blessedly free of the "scroll bars" that HP likes to put on their touchpads (i was endlessly triggering these scroll areas with the edge of my palm as i typed, but the better location of the Acer's touchpad prevents this from happening altogether.) I also ran it through its paces with multiple simultaneous internet downloads, a 45Gig rsync job over the LAN, and simultaneously building GNU Emacs from CVS and the aforementioned realtime kernel. I think I'll be pretty comfortable with this as my primary personal machine. I can't seem to get started with the wireless, the kernel only detects the wired (only one eth*, see below.) -- Package-specific info: Boot method: CD Image version: daily lenny netinst build from yesterday Date: 2008-09-10 Machine: Acer Extensa 4420-5963 laptop Partitions: <df -Tl will do; the raw partition table is preferred> Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [E] Would not boot unless given acpi=off Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="5.0 (lenny) - installer build 20080909-19:04" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== umame -a: Linux monad 2.6.26-1-486 #1 Thu Aug 28 11:14:57 UTC 2008 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] lspci -knn: 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] lspci -knn: 00:04.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7914] lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] lspci -knn: Kernel driver in use: ahci lspci -knn: Kernel modules: ahci lspci -knn: 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: Kernel modules: ohci-hcd lspci -knn: 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: Kernel modules: ohci-hcd lspci -knn: 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: Kernel modules: ohci-hcd lspci -knn: 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: Kernel modules: ohci-hcd lspci -knn: 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: Kernel modules: ohci-hcd lspci -knn: 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) lspci -knn: 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] lspci -knn: Kernel driver in use: ATIIXP_IDE lspci -knn: Kernel modules: atiixp lspci -knn: 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] lspci -knn: 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] lspci -knn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] lspci -knn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] lspci -knn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] lspci -knn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] lspci -knn: 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller [11ab:436b] (rev 15) lspci -knn: Kernel driver in use: sky2 lspci -knn: Kernel modules: sky2 lspci -knn: 05:00.0 Network controller [0280]: Broadcom Corporation BCM4310 USB Controller [14e4:4315] (rev 01) lspci -knn: 0b:06.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711SP1 Memory CardBus Controller [1217:7136] (rev 01) lspci -knn: Kernel driver in use: yenta_cardbus lspci -knn: Kernel modules: yenta_socket lspci -knn: 0b:06.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 02) lspci -knn: 0b:06.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01) lspci -knn: 0b:06.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) lspci -knn: Kernel driver in use: ohci1394 lspci -knn: Kernel modules: ohci1394 lsmod: Module Size Used by lsmod: ufs 63620 0 lsmod: qnx4 7684 0 lsmod: ntfs 180416 0 lsmod: dm_mod 45384 0 lsmod: md_mod 65940 0 lsmod: xfs 446836 0 lsmod: reiserfs 187008 0 lsmod: jfs 148060 0 lsmod: ext3 103432 1 lsmod: jbd 35092 1 ext3 lsmod: vfat 8832 0 lsmod: fat 39964 1 vfat lsmod: ext2 52616 0 lsmod: mbcache 6656 2 ext3,ext2 lsmod: eth1394 13444 0 lsmod: sky2 36740 0 lsmod: nls_utf8 1664 2 lsmod: isofs 27684 0 lsmod: nls_base 6528 6 ntfs,jfs,vfat,fat,nls_utf8,isofs lsmod: zlib_inflate 13952 1 isofs lsmod: sbp2 18700 0 lsmod: ide_generic 2432 0 [permanent] lsmod: usb_storage 75200 0 lsmod: vga16fb 11276 2 lsmod: vgastate 7552 1 vga16fb lsmod: fan 4100 0 lsmod: pcmcia 29484 0 lsmod: firmware_class 6656 1 pcmcia lsmod: ide_cd_mod 27524 0 lsmod: cdrom 30112 1 ide_cd_mod lsmod: sd_mod 21904 3 lsmod: ohci1394 25008 0 lsmod: ieee1394 75576 3 eth1394,sbp2,ohci1394 lsmod: yenta_socket 20492 1 lsmod: rsrc_nonstatic 9344 1 yenta_socket lsmod: pcmcia_core 31760 3 pcmcia,yenta_socket,rsrc_nonstatic lsmod: atiixp 3328 0 [permanent] lsmod: ide_core 91188 3 ide_generic,ide_cd_mod,atiixp lsmod: ehci_hcd 28300 0 lsmod: ahci 23048 2 lsmod: ohci_hcd 18436 0 lsmod: libata 140960 1 ahci lsmod: usbcore 117104 4 usb_storage,ehci_hcd,ohci_hcd lsmod: scsi_mod 129420 4 sbp2,usb_storage,sd_mod,libata lsmod: dock 8076 1 libata lsmod: thermal 15004 0 lsmod: processor 27824 1 thermal lsmod: thermal_sys 10656 3 fan,thermal,processor df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 453140 28 453112 0% /dev df: /dev/sda1 151225248 738500 142804872 1% /target df: /dev/sda1 151225248 738500 142804872 1% /dev/.static/dev df: tmpfs 453140 28 453112 0% /target/dev free: total used free shared buffers free: Mem: 906284 615768 290516 0 1380 free: Swap: 2650684 0 2650684 free: Total: 3556968 615768 2941200 pccardctl status: Socket 0: pccardctl status: no card pccardctl ident: Socket 0: pccardctl ident: no product info available /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : AuthenticAMD /proc/cpuinfo: cpu family : 15 /proc/cpuinfo: model : 104 /proc/cpuinfo: model name : AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 /proc/cpuinfo: stepping : 2 /proc/cpuinfo: cpu MHz : 1895.331 /proc/cpuinfo: cache size : 256 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 1 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch /proc/cpuinfo: bogomips : 3872.38 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: power management: ts fid vid ttp tm stc 100mhzsteps /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:14.1 /proc/ioports: 0170-0177 : ide_generic /proc/ioports: 01f0-01f7 : 0000:00:14.1 /proc/ioports: 01f0-01f7 : SB600_PATA /proc/ioports: 0220-022f : pnp 00:06 /proc/ioports: 0376-0376 : 0000:00:14.1 /proc/ioports: 0376-0376 : ide_generic /proc/ioports: 03c0-03df : vga+ /proc/ioports: 03f6-03f6 : 0000:00:14.1 /proc/ioports: 03f6-03f6 : SB600_PATA /proc/ioports: 040b-040b : pnp 00:06 /proc/ioports: 04d0-04d1 : pnp 00:06 /proc/ioports: 04d6-04d6 : pnp 00:06 /proc/ioports: 0530-0537 : pnp 00:06 /proc/ioports: 087f-087f : pnp 00:06 /proc/ioports: 0c00-0c01 : pnp 00:06 /proc/ioports: 0c14-0c14 : pnp 00:06 /proc/ioports: 0c50-0c52 : pnp 00:06 /proc/ioports: 0c6c-0c6c : pnp 00:06 /proc/ioports: 0c6f-0c6f : pnp 00:06 /proc/ioports: 0cd0-0cd1 : pnp 00:06 /proc/ioports: 0cd2-0cd3 : pnp 00:06 /proc/ioports: 0cd4-0cd5 : pnp 00:06 /proc/ioports: 0cd6-0cd7 : pnp 00:06 /proc/ioports: 0cd8-0cdf : pnp 00:06 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 0f40-0f47 : pnp 00:06 /proc/ioports: 1080-1080 : pnp 00:06 /proc/ioports: 2000-2fff : PCI Bus 0000:0b /proc/ioports: 2000-20ff : PCI CardBus 0000:0c /proc/ioports: 2400-24ff : PCI CardBus 0000:0c /proc/ioports: 8000-805f : pnp 00:06 /proc/ioports: 8000-8003 : ACPI PM1a_EVT_BLK /proc/ioports: 8004-8005 : ACPI PM1a_CNT_BLK /proc/ioports: 8008-800b : ACPI PM_TMR /proc/ioports: 8010-8015 : ACPI CPU throttle /proc/ioports: 8020-8027 : ACPI GPE0_BLK /proc/ioports: 8104-8107 : ACPI PM1b_EVT_BLK /proc/ioports: 8200-8200 : ACPI PM2_CNT_BLK /proc/ioports: 8400-840f : 0000:00:12.0 /proc/ioports: 8400-840f : ahci /proc/ioports: 8410-841f : 0000:00:14.0 /proc/ioports: 8420-842f : 0000:00:14.1 /proc/ioports: 8420-842f : SB600_PATA /proc/ioports: 8430-8433 : 0000:00:12.0 /proc/ioports: 8430-8433 : ahci /proc/ioports: 8434-8437 : 0000:00:12.0 /proc/ioports: 8434-8437 : ahci /proc/ioports: 8438-843f : 0000:00:12.0 /proc/ioports: 8438-843f : ahci /proc/ioports: 8440-8447 : 0000:00:12.0 /proc/ioports: 8440-8447 : ahci /proc/ioports: 9000-9fff : PCI Bus 0000:01 /proc/ioports: 9000-90ff : 0000:01:05.0 /proc/ioports: a000-afff : PCI Bus 0000:02 /proc/ioports: a000-a0ff : 0000:02:00.0 /proc/ioports: a000-a0ff : sky2 /proc/iomem: 00000000-0009dbff : System RAM /proc/iomem: 0009dc00-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000cd3ff : Video ROM /proc/iomem: 000cd800-000ce7ff : Adapter ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-6fe7ffff : System RAM /proc/iomem: 00100000-002a75d2 : Kernel code /proc/iomem: 002a75d3-00361fff : Kernel data /proc/iomem: 003b4000-0040dbd7 : Kernel bss /proc/iomem: 6fe80000-6fe91fff : ACPI Tables /proc/iomem: 6fe92000-6fe93fff : ACPI Non-volatile Storage /proc/iomem: 6fe94000-7fffffff : reserved /proc/iomem: 88000000-880fffff : PCI Bus 0000:02 /proc/iomem: 88000000-8801ffff : 0000:02:00.0 /proc/iomem: 88400000-887fffff : PCI CardBus 0000:0c /proc/iomem: 8c000000-8fffffff : PCI CardBus 0000:0c /proc/iomem: d0000000-dfffffff : PCI Bus 0000:01 /proc/iomem: d0000000-dfffffff : 0000:01:05.0 /proc/iomem: e0000000-efffffff : reserved /proc/iomem: e0000000-e0dfffff : PCI MMCONFIG 0 /proc/iomem: f0000000-f01fffff : PCI Bus 0000:01 /proc/iomem: f0000000-f00fffff : 0000:01:05.0 /proc/iomem: f0100000-f010ffff : 0000:01:05.0 /proc/iomem: f0200000-f02fffff : PCI Bus 0000:02 /proc/iomem: f0200000-f0203fff : 0000:02:00.0 /proc/iomem: f0200000-f0203fff : sky2 /proc/iomem: f0300000-f03fffff : PCI Bus 0000:05 /proc/iomem: f0300000-f0303fff : 0000:05:00.0 /proc/iomem: f0400000-f04fffff : PCI Bus 0000:0b /proc/iomem: f0400000-f0400fff : 0000:0b:06.0 /proc/iomem: f0400000-f0400fff : yenta_socket /proc/iomem: f0401000-f0401fff : 0000:0b:06.3 /proc/iomem: f0402000-f0402fff : 0000:0b:06.4 /proc/iomem: f0402000-f04027ff : ohci1394 /proc/iomem: f0403000-f04037ff : 0000:0b:06.4 /proc/iomem: f0403800-f04038ff : 0000:0b:06.2 /proc/iomem: f0700000-f0703fff : 0000:00:14.2 /proc/iomem: f0704000-f0704fff : 0000:00:13.0 /proc/iomem: f0704000-f0704fff : ohci_hcd /proc/iomem: f0705000-f0705fff : 0000:00:13.1 /proc/iomem: f0705000-f0705fff : ohci_hcd /proc/iomem: f0706000-f0706fff : 0000:00:13.2 /proc/iomem: f0706000-f0706fff : ohci_hcd /proc/iomem: f0707000-f0707fff : 0000:00:13.3 /proc/iomem: f0707000-f0707fff : ohci_hcd /proc/iomem: f0708000-f0708fff : 0000:00:13.4 /proc/iomem: f0708000-f0708fff : ohci_hcd /proc/iomem: f0709000-f07093ff : 0000:00:12.0 /proc/iomem: f0709000-f07093ff : ahci /proc/iomem: f0709400-f07094ff : 0000:00:13.5 /proc/iomem: f0709400-f07094ff : ehci_hcd /proc/iomem: fec00000-fec0ffff : reserved /proc/iomem: fed00000-fed003ff : HPET 2 /proc/iomem: fee00000-fee00fff : reserved /proc/iomem: ff800000-ffefffff : pnp 00:06 /proc/iomem: fff00000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 55727 XT-PIC-XT timer /proc/interrupts: 1: 402 XT-PIC-XT i8042 /proc/interrupts: 2: 0 XT-PIC-XT cascade /proc/interrupts: 3: 1 XT-PIC-XT /proc/interrupts: 4: 1 XT-PIC-XT /proc/interrupts: 5: 2 XT-PIC-XT /proc/interrupts: 7: 10 XT-PIC-XT /proc/interrupts: 8: 0 XT-PIC-XT rtc0 /proc/interrupts: 9: 251 XT-PIC-XT acpi /proc/interrupts: 10: 68498 XT-PIC-XT ohci_hcd:usb1, eth0 /proc/interrupts: 11: 58835 XT-PIC-XT ohci_hcd:usb2, ohci_hcd:usb3, ohci_hcd:usb4, ohci_hcd:usb5, ahci, ehci_hcd:usb6, yenta, ohci1394 /proc/interrupts: 12: 19 XT-PIC-XT i8042 /proc/interrupts: 14: 3693 XT-PIC-XT ide0 /proc/interrupts: 15: 0 XT-PIC-XT ide1 /proc/interrupts: NMI: 0 Non-maskable interrupts /proc/interrupts: LOC: 0 Local timer interrupts /proc/interrupts: TRM: 0 Thermal event interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: ERR: 9 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 906284 kB /proc/meminfo: MemFree: 290492 kB /proc/meminfo: Buffers: 1380 kB /proc/meminfo: Cached: 561416 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 162320 kB /proc/meminfo: Inactive: 404396 kB /proc/meminfo: SwapTotal: 2650684 kB /proc/meminfo: SwapFree: 2650684 kB /proc/meminfo: Dirty: 380 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 3944 kB /proc/meminfo: Mapped: 1948 kB /proc/meminfo: Slab: 37280 kB /proc/meminfo: SReclaimable: 32928 kB /proc/meminfo: SUnreclaim: 4352 kB /proc/meminfo: PageTables: 280 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 3103824 kB /proc/meminfo: Committed_AS: 7044 kB /proc/meminfo: VmallocTotal: 122564 kB /proc/meminfo: VmallocUsed: 8684 kB /proc/meminfo: VmallocChunk: 113468 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26.5-rt8 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26.5-rt8 ([EMAIL PROTECTED]) (gcc version 4.3.1 (Debian 4.3.1-9) ) #1 SMP PREEMPT RT Wed Sep 10 20:25:45 EDT 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fe80000 (usable) [ 0.000000] BIOS-e820: 000000006fe80000 - 000000006fe92000 (ACPI data) [ 0.000000] BIOS-e820: 000000006fe92000 - 000000006fe94000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fe94000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 894MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00f83f0] 000f83f0 [ 0.000000] Entering add_active_range(0, 0, 458368) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 458368 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 458368 [ 0.000000] On node 0 totalpages: 458368 [ 0.000000] DMA zone: 52 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4044 pages, LIFO batch:0 [ 0.000000] Normal zone: 2860 pages used for memmap [ 0.000000] Normal zone: 222420 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2908 pages used for memmap [ 0.000000] HighMem zone: 226084 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: AMD Product ID: POOH <6>MPTABLE: Product ID: POOH <6>MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 Version 33 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 39876 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2 [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452548 [ 0.000000] Kernel command line: root=/dev/sda1 ro noapic nolapic quiet acpi=off [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1895.297 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 1797612k/1833472k available (1863k kernel code, 34480k reserved, 767k data, 244k init, 915968k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000999] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.000999] .init : 0xc0397000 - 0xc03d4000 ( 244 kB) [ 0.000999] .data : 0xc02d1c7e - 0xc03918a0 ( 767 kB) [ 0.000999] .text : 0xc0100000 - 0xc02d1c7e (1863 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.060995] Calibrating delay using timer specific routine.. 3855.09 BogoMIPS (lpj=1927549) [ 0.061038] Security Framework initialized [ 0.061043] SELinux: Disabled at boot. [ 0.061046] Capability LSM initialized [ 0.061069] Mount-cache hash table entries: 512 [ 0.061220] Initializing cgroup subsys ns [ 0.061224] Initializing cgroup subsys cpuacct [ 0.061226] Initializing cgroup subsys devices [ 0.061245] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.061248] CPU: L2 Cache: 256K (64 bytes/line) [ 0.061250] CPU 0(2) -> Core 0 [ 0.061253] Intel machine check architecture supported. [ 0.061256] Intel machine check reporting enabled on CPU#0. [ 0.061267] Checking 'hlt' instruction... OK. [ 0.066001] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02 [ 0.168658] Booting processor 1/1 ip 6000 [ 0.178972] Initializing CPU#1 [ 0.178972] Calibrating delay using timer specific routine.. 3789.71 BogoMIPS (lpj=1894856) [ 0.178972] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.178972] CPU: L2 Cache: 256K (64 bytes/line) [ 0.178972] CPU 1(2) -> Core 1 [ 0.178972] Intel machine check architecture supported. [ 0.178972] Intel machine check reporting enabled on CPU#1. [ 0.239142] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02 [ 0.239170] Brought up 2 CPUs [ 0.239173] Total of 2 processors activated (7644.81 BogoMIPS). [ 0.239183] CPU0 attaching sched-domain: [ 0.239187] domain 0: span 0-1 [ 0.239189] groups: 0 1 [ 0.239194] CPU1 attaching sched-domain: [ 0.239196] domain 0: span 0-1 [ 0.239198] groups: 1 0 [ 0.178972] net_namespace: 744 bytes [ 0.178972] Booting paravirtualized kernel on bare hardware [ 0.178972] NET: Registered protocol family 16 [ 0.240392] PCI: PCI BIOS revision 3.00 entry at 0xfdb78, last bus=14 [ 0.240396] PCI: Using configuration type 1 for base access [ 0.240401] Setting up standard PCI resources [ 0.241964] ACPI: Interpreter disabled. [ 0.241973] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.242029] pnp: PnP ACPI: disabled [ 0.242032] PnPBIOS: Scanning system for PnP BIOS support... [ 0.242061] PnPBIOS: Found PnP BIOS installation structure at 0xc00f8410 [ 0.242064] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc5b6, dseg 0x400 [ 0.242405] PNPBIOS fault.. attempting recovery. [ 0.242459] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue [ 0.242515] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably [ 0.242569] PnPBIOS: Check with your vendor for an updated BIOS [ 0.242619] PnPBIOS: get_dev_node: unexpected status 0x37 [ 0.242668] PnPBIOS: 0 nodes reported by PnP BIOS; 0 recorded by driver [ 0.243043] PCI: Probing PCI hardware [ 0.243047] PCI: Probing PCI hardware (bus 00) [ 0.243296] pci 0000:00:12.0: set SATA to AHCI mode [ 0.244699] PCI: Transparent bridge - 0000:00:14.4 [ 0.246964] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 [ 0.246964] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0 [ 0.251563] PCI: region 0000:0b:06.0/9 too large: 0x0000000000000000-0x0000000003ffffff [ 0.251573] PCI: Bridge: 0000:00:01.0 [ 0.251576] IO window: 9000-9fff [ 0.251579] MEM window: 0xf0000000-0xf01fffff [ 0.251582] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.251586] PCI: Bridge: 0000:00:04.0 [ 0.251589] IO window: a000-afff [ 0.251592] MEM window: 0xf0200000-0xf02fffff [ 0.251594] PREFETCH window: 0x0000000088000000-0x00000000880fffff [ 0.251599] PCI: Bridge: 0000:00:05.0 [ 0.251600] IO window: disabled. [ 0.251603] MEM window: 0xf0300000-0xf03fffff [ 0.251606] PREFETCH window: disabled. [ 0.251609] PCI: Bridge: 0000:00:06.0 [ 0.251610] IO window: disabled. [ 0.251613] MEM window: disabled. [ 0.251615] PREFETCH window: disabled. [ 0.251621] PCI: Bus 12, cardbus bridge: 0000:0b:06.0 [ 0.251623] IO window: 0x00001000-0x000010ff [ 0.251628] IO window: 0x00001400-0x000014ff [ 0.251634] MEM window: 0x8c000000-0x8fffffff [ 0.251639] PCI: Bridge: 0000:00:14.4 [ 0.251642] IO window: 1000-1fff [ 0.251648] MEM window: 0xf0400000-0xf04fffff [ 0.251652] PREFETCH window: disabled. [ 0.251671] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.251678] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.251686] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.251745] NET: Registered protocol family 2 [ 0.266029] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.266334] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.266989] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.268026] TCP: Hash tables configured (established 131072 bind 65536) [ 0.268029] TCP reno registered [ 0.274058] NET: Registered protocol family 1 [ 0.274189] checking if image is initramfs... it is [ 0.801925] Freeing initrd memory: 6857k freed [ 0.802925] audit: initializing netlink socket (disabled) [ 0.802925] type=2000 audit(1221067926.802:1): initialized [ 0.803116] krcupreemptd setsched 0 [ 0.803120] prio = 98 [ 0.803117] highmem bounce pool size: 64 pages [ 0.803122] Total HugeTLB memory allocated, 0 [ 0.803220] VFS: Disk quotas dquot_6.5.1 [ 0.803250] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.803291] msgmni has been set to 1737 [ 0.803412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.803415] io scheduler noop registered [ 0.803417] io scheduler anticipatory registered [ 0.803419] io scheduler deadline registered [ 0.803433] io scheduler cfq registered (default) [ 0.873958] pci 0000:01:05.0: Boot video device [ 0.874117] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.874138] assign_interrupt_mode Found MSI capability [ 0.874152] Allocate Port Service[0000:00:04.0:pcie00] [ 0.874231] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.874250] assign_interrupt_mode Found MSI capability [ 0.874260] Allocate Port Service[0000:00:05.0:pcie00] [ 0.874334] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.874353] assign_interrupt_mode Found MSI capability [ 0.874363] Allocate Port Service[0000:00:06.0:pcie00] [ 0.874408] Allocate Port Service[0000:00:06.0:pcie02] [ 0.874925] isapnp: Scanning for PnP cards... [ 1.234081] isapnp: No Plug & Play device found [ 1.237404] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.238932] Clocksource tsc unstable (delta = 1005983746 ns) [ 1.239617] brd: module loaded [ 1.239781] PNP: No PS/2 controller found. Probing ports directly. [ 1.250138] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.259264] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.259269] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.259272] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.259275] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.259278] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.259615] mice: PS/2 mouse device common for all mice [ 1.260276] cpuidle: using governor ladder [ 1.260279] cpuidle: using governor menu [ 1.260285] No iBFT detected. [ 1.260740] TCP cubic registered [ 1.260743] NET: Registered protocol family 17 [ 1.260750] Using IPI No-Shortcut mode [ 1.260934] registered taskstats version 1 [ 1.261077] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.261239] Freeing unused kernel memory: 244k freed [ 1.282946] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.503201] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 1.650695] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 1.650727] sky2 0000:02:00.0: v1.21 addr 0xf0200000 irq 10 Yukon-Extreme (0xb5) rev 2 [ 1.651490] sky2 eth0: addr 00:1d:72:3f:2a:e3 [ 1.668613] SCSI subsystem initialized [ 1.678318] libata version 3.00 loaded. [ 1.680225] ahci 0000:00:12.0: version 3.0 [ 1.680266] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.704405] usbcore: registered new interface driver usbfs [ 1.704436] usbcore: registered new interface driver hub [ 1.704498] usbcore: registered new device driver usb [ 1.705602] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.755534] Uniform Multi-Platform E-IDE driver [ 1.755540] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.846278] sdhci: Secure Digital Host Controller Interface driver [ 1.846282] sdhci: Copyright(c) Pierre Ossman [ 2.681131] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.681137] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 2.681533] scsi0 : ahci [ 2.681639] scsi1 : ahci [ 2.681689] scsi2 : ahci [ 2.681737] scsi3 : ahci [ 2.681772] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf0709100 irq 11 [ 2.681777] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf0709180 irq 11 [ 2.681781] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf0709200 irq 11 [ 2.681784] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf0709280 irq 11 [ 3.139935] ata1: softreset failed (device not ready) [ 3.139993] ata1: failed due to HW bug, retry pmp=0 [ 3.292945] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.293887] ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133 [ 3.293891] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.293900] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.295030] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.295034] ata1.00: configured for UDMA/133 [ 3.600104] ata2: SATA link down (SStatus 0 SControl 300) [ 3.905102] ata3: SATA link down (SStatus 0 SControl 300) [ 4.221102] ata4: SATA link down (SStatus 0 SControl 300) [ 4.232192] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5 [ 4.232440] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 4.232546] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 4.232600] ohci_hcd 0000:00:13.0: irq 10, io mem 0xf0704000 [ 4.283185] usb usb1: configuration #1 chosen from 1 choice [ 4.283216] hub 1-0:1.0: USB hub found [ 4.283231] hub 1-0:1.0: 2 ports detected [ 4.384182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.384185] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.384187] usb usb1: Product: OHCI Host Controller [ 4.384190] usb usb1: Manufacturer: Linux 2.6.26.5-rt8 ohci_hcd [ 4.384192] usb usb1: SerialNumber: 0000:00:13.0 [ 4.384256] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 4.384283] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 4.384318] ohci_hcd 0000:00:13.1: irq 5, io mem 0xf0705000 [ 4.435167] usb usb2: configuration #1 chosen from 1 choice [ 4.435193] hub 2-0:1.0: USB hub found [ 4.435206] hub 2-0:1.0: 2 ports detected [ 4.536169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.536172] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.536174] usb usb2: Product: OHCI Host Controller [ 4.536176] usb usb2: Manufacturer: Linux 2.6.26.5-rt8 ohci_hcd [ 4.536178] usb usb2: SerialNumber: 0000:00:13.1 [ 4.536255] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 4.536284] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 4.536297] ohci_hcd 0000:00:13.2: irq 11, io mem 0xf0706000 [ 4.587153] usb usb3: configuration #1 chosen from 1 choice [ 4.587181] hub 3-0:1.0: USB hub found [ 4.587191] hub 3-0:1.0: 2 ports detected [ 4.688173] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.688176] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.688179] usb usb3: Product: OHCI Host Controller [ 4.688181] usb usb3: Manufacturer: Linux 2.6.26.5-rt8 ohci_hcd [ 4.688183] usb usb3: SerialNumber: 0000:00:13.2 [ 4.688232] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 4.688254] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 4.688266] ohci_hcd 0000:00:13.3: irq 5, io mem 0xf0707000 [ 4.739175] usb usb4: configuration #1 chosen from 1 choice [ 4.739202] hub 4-0:1.0: USB hub found [ 4.739212] hub 4-0:1.0: 2 ports detected [ 4.840156] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.840159] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.840161] usb usb4: Product: OHCI Host Controller [ 4.840163] usb usb4: Manufacturer: Linux 2.6.26.5-rt8 ohci_hcd [ 4.840165] usb usb4: SerialNumber: 0000:00:13.3 [ 4.840218] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 4.840243] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 5 [ 4.840280] ehci_hcd 0000:00:13.5: debug port 1 [ 4.840290] ehci_hcd 0000:00:13.5: irq 11, io mem 0xf0709400 [ 4.846087] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.846146] usb usb5: configuration #1 chosen from 1 choice [ 4.846172] hub 5-0:1.0: USB hub found [ 4.846180] hub 5-0:1.0: 10 ports detected [ 4.947158] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.947161] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.947164] usb usb5: Product: EHCI Host Controller [ 4.947166] usb usb5: Manufacturer: Linux 2.6.26.5-rt8 ehci_hcd [ 4.947168] usb usb5: SerialNumber: 0000:00:13.5 [ 4.947195] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 4.947217] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 4.947231] ohci_hcd 0000:00:13.4: irq 11, io mem 0xf0708000 [ 4.998154] usb usb6: configuration #1 chosen from 1 choice [ 4.998180] hub 6-0:1.0: USB hub found [ 4.998190] hub 6-0:1.0: 2 ports detected [ 5.099170] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.099173] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.099176] usb usb6: Product: OHCI Host Controller [ 5.099178] usb usb6: Manufacturer: Linux 2.6.26.5-rt8 ohci_hcd [ 5.099180] usb usb6: SerialNumber: 0000:00:13.4 [ 5.101173] sdhci: SDHCI controller found at 0000:0b:06.2 [1217:7120] (rev 2) [ 5.101223] mmc0: Unknown controller version (2). You may experience problems. [ 5.101337] mmc0: SDHCI at 0xf0403800 irq 11 DMA [ 5.124281] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [ 5.124299] SB600_PATA: not 100% native mode: will probe irqs later [ 5.124308] ide0: BM-DMA at 0x8420-0x8427 [ 5.124315] Probing IDE interface ide0... [ 5.153076] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0402000-f04027ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 5.156275] Driver 'sd' needs updating - please use bus_type methods [ 5.157138] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.157155] sd 0:0:0:0: [sda] Write Protect is off [ 5.157158] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.157182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.157252] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.157266] sd 0:0:0:0: [sda] Write Protect is off [ 5.157268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.157291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.157295] sda: sda1 sda2 < sda5 > [ 5.202342] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.796274] hda: HL-DT-ST DVDRAM GSA-T40N, ATAPI CD/DVD-ROM drive [ 6.101977] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.102794] hda: UDMA/33 mode selected [ 6.103294] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.123469] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 6.123477] Uniform CD-ROM driver Revision: 3.20 [ 6.212824] PM: Starting manual resume from disk [ 6.295770] EXT3-fs: mounted filesystem with ordered data mode. [ 6.296240] kjournald starting. Commit interval 5 seconds [ 6.418227] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001d72ffff3f2ae3] [ 7.923076] udevd version 125 started [ 8.611098] Linux agpgart interface v0.103 [ 8.674090] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.863039] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.091137] acer_wmi: Unknown symbol wmi_evaluate_method [ 9.091255] acer_wmi: Unknown symbol wmi_has_guid [ 9.091386] acer_wmi: Unknown symbol wmi_query_block [ 9.163422] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 9.198608] Yenta: CardBus bridge found at 0000:0b:06.0 [1025:0123] [ 9.198638] PCI: Bus 12, cardbus bridge: 0000:0b:06.0 [ 9.198640] IO window: 0x00001000-0x000010ff [ 9.198646] IO window: 0x00001400-0x000014ff [ 9.198651] PREFETCH window: 0x88400000-0x887fffff [ 9.198656] MEM window: 0x8c000000-0x8fffffff [ 9.198666] Yenta O2: res at 0x94/0xD4: 00/ea [ 9.198667] Yenta O2: enabling read prefetch/write burst [ 9.236941] input: PC Speaker as /class/input/input1 [ 9.243984] PCSP: Timer resolution is not sufficient (999848nS) [ 9.244050] PCSP: Make sure you have HPET and ACPI enabled. [ 9.244106] PC-Speaker initialization failed. [ 9.254020] pcspkr: probe of pcspkr failed with error -5 [ 9.276732] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 9.320754] Yenta: ISA IRQ mask 0x0098, PCI irq 11 [ 9.320758] Socket status: 30000006 [ 9.320762] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff [ 9.320765] cs: IO port probe 0x1000-0x1fff: clean. [ 9.321095] pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff [ 9.694095] cs: IO port probe 0x100-0x3af: clean. [ 9.696095] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7 [ 9.697095] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f [ 9.697619] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf [ 9.698364] cs: IO port probe 0xa00-0xaff: clean. [ 9.867200] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000 [ 9.917504] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 10.095397] Error: Driver 'pcspkr' is already registered, aborting... [ 11.679521] Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k [ 12.123533] EXT3 FS on sda1, internal journal [ 12.689636] loop: module loaded [ 14.358133] sky2 eth0: enabling interface [ 15.561095] powernow_k8: Unknown symbol acpi_processor_notify_smm [ 15.561095] powernow_k8: Unknown symbol acpi_processor_unregister_performance [ 15.561208] powernow_k8: Unknown symbol acpi_processor_register_performance [ 15.621351] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 15.621406] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 15.621611] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 15.621687] acpi_cpufreq: Unknown symbol acpi_processor_register_performance [ 16.403107] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 18.118400] NET: Registered protocol family 10 [ 18.119466] lo: Disabled Privacy Extensions [ 18.262373] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 18.354095] Bluetooth: Core ver 2.11 [ 18.354095] NET: Registered protocol family 31 [ 18.354095] Bluetooth: HCI device and connection manager initialized [ 18.354095] Bluetooth: HCI socket layer initialized [ 18.479831] Bluetooth: L2CAP ver 2.9 [ 18.479886] Bluetooth: L2CAP socket layer initialized [ 18.762098] Bluetooth: RFCOMM socket layer initialized [ 18.762166] Bluetooth: RFCOMM TTY layer initialized [ 18.762187] Bluetooth: RFCOMM ver 1.8 [ 29.042599] eth0: no IPv6 routers present [ 656.223031] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0). [ 656.223036] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known. [ 656.376155] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0). [ 656.376159] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known. [ 914.504211] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0). [ 914.504216] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known. [ 914.601780] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0). [ 914.601785] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
