Package: installation-reports
INSTALL REPORT
Debian-installer-version: lenny i386 hd-media daily 2008.07.21
(see comments for details)
uname -a: (does not boot)
Date: 2008.07.22
Method:
How did you install? Boot from USB key.
What did you boot off? USB key
If network install, from where?
Proxied? no
Machine: Dell Poweredge 2950
Processor: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz
(two, quad core)
Memory: 16Gb
MemTotal: 16441888 kB
MemFree: 16351100 kB
Buffers: 4644 kB
Cached: 28908 kB
SwapCached: 0 kB
Active: 28840 kB
Inactive: 16216 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 16441888 kB
LowFree: 16351100 kB
SwapTotal: 8388600 kB
SwapFree: 8388600 kB
Dirty: 8 kB
Writeback: 0 kB
AnonPages: 11512 kB
Mapped: 4448 kB
Slab: 15592 kB
PageTables: 1660 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 16609544 kB
Committed_AS: 45784 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 266708 kB
VmallocChunk: 34359471415 kB
Root Device:
Root Size/partition table:
Output of lspci and lspci -n:
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
I was attempting to provide more information about an old bug (#414117).
I downloaded an hd-media image from
http://people.debian.org/~joeyh/d-i/images/daily/hd-media/boot.img.gz
and a netinst.iso from
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
I set the USB key up like this:
zcat boot.img.gz >/dev/sdb
mount /dev/sdb /mnt
cp netinst.iso /mnt
The sequence to reproduce is:
1. Power off machine.
2. Insert USB key.
3. Power up, select F11 to get the boot menu.
4. Select the USB key device to boot from.
The installer screen appears (so ISOLINUX/SYSLINUX is working)
'Install' is highlighted.
5. Press <return>
The system starts to load, ie 'linux' loads, then 'initrdg.gz'.
The initrd appears to complete loading.
But then the system boots back into the BIOS.
I don't see any normal boot messages at all.
I tried different modes of booting, by using the arrow keys to highlight
the different options on the first screen of the installer, and hitting
<return>.
* Advanced->Expert Install'
* Help->, look at a few screens (using F6, F7, F8)
then type 'Install' at the prompt on the screen.
* 'Graphical'
All give the same result.
The bios is Phoenix ROM BIOS Plus 1.10, 1.3.7
This machine is currently running etch, with EMT64 extensions turned on
(ie amd64 kernel). So I'm confident the hardware is ok.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
