Hi, On Mon, Jul 07, 2008 at 12:18:02PM +0200, Frans Pop wrote: > > module r8169 is loaded and chokes, see syslog > > Known issue; see: http://bugs.debian.org/471892 > Upgrading to the 2.6.25 kernel from unstable may well fix this.
Will have to try. How can I do this during install? With 2.6.24 I have no network and after installation I do not get any drives. > > The installed system fails to load its root file system and I'm unable > > to get anything useful after it falls into the emergency shell > > (initramfs). > > Well, you're not really giving us anything useful either here... > My guess is that you are affected by the first erratum listed for the > Beta2 release: http://www.debian.org/devel/debian-installer/errata. > > Please check (in the debug shell) the contents of /etc/fstab and compare > that to what disk devices are being recognized (by listing contents > of /dev/ or using the output of dmesg). > Also provide the output of 'echo $ROOT'. The problem is that there are NO drives (sdx) under dev and I don't know how to get the system to recognize any media (also no usb devices etc.). $ROOT gives /dev/sda1 which should be correct. If I put a newer business-card iso image on the beta2 hd-media, I'm not able to install because the installer does not recognize the codename of the distribution. If I'm trying a daily build for the hd-media, I was yet unlucky as these immediately rebooted after unpacking the kernel. Thank you! Michael
signature.asc
Description: Digital signature