Your message dated Wed, 2 Jul 2008 19:40:56 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#488706: 5.0beta2 netinst laptop Toshiba Tecra 8000
RTL-8169 ethernet PCMCIA not recognized
has caused the Debian Bug report #488706,
regarding 5.0beta2 netinst laptop Toshiba Tecra 8000 RTL-8169 ethernet PCMCIA
not recognized
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
488706: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=488706
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: installation-reports
Boot method: network
Image version:
http://cdimage.debian.org/cdimage/lenny_di_beta2/i386/iso-cd/debian-LennyBeta2-i386-netinst.iso
Date: 2008-06-30
Machine: laptop Toshiba Tecra 8000
Processor: pentium2
Memory: 128M
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda1 ext3 76549056 7881108 64779420 11% /
tmpfs tmpfs 63516 0 63516 0% /lib/init/rw
udev tmpfs 10240 52 10188 1% /dev
tmpfs tmpfs 63516 12 63504 1% /dev/shm
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX -
82443BX/ZX/DX Host bridge (AGP disabled) [8086:7192] (rev 03)
00:04.0
VGA compatible controller [0300]: Neomagic Corporation NM2200
[MagicGraph 256AV] [10c8:0005] (rev 12)
00:05.0 Bridge [0680]: Intel
Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
00:05.1 IDE
interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111]
(rev 01)
00:05.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB
PIIX4 USB [8086:7112] (rev 01)
00:05.3 Bridge [0680]: Intel Corporation
82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
00:09.0 Communication
controller [0780]: Toshiba America Info Systems FIR Port [1179:0701]
(rev 23)
00:0b.0 CardBus bridge [0607]: Toshiba America Info Systems
ToPIC97 [1179:060f] (rev 05)
00:0b.1 CardBus bridge [0607]: Toshiba
America Info Systems ToPIC97 [1179:060f] (rev 05)
05:00.0 Ethernet
controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit
Ethernet [10ec:8169] (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
RTL-8169 ethernet PCMCIA not recognized, I had to stop install.
The laptop had etch already installed. CD-ROM is old and may have
problems.
--- End Message ---
--- Begin Message ---
On Tuesday 01 July 2008, Jean-Bernard Addor wrote:
> From memory, it detected the CD and after made a message (I remember
> very well the message, I was really surprised) that it was not able to
> detect the ethernet card. I continued and it blocked definitively when
> it needed something it was not able to find on the CD. I tryed again
> but I have not been able to even boot the kernel, I have the impression
> the CD driver is finished (ie the computer).
OK. If this is hardware failure then I don't think there is any reason to
keep this installation report open. Therefore closing it.
If your computer can boot from a USB stick, you could try installing it
that way. See the installation guide for additional information.
Cheers,
FJP
--- End Message ---
