Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: debian gnu/linux lennybeta2 "lenny" - official beta i386 netinst
binary-1 20080608-11:24
Date: <Date and time of the install>
Machine: Fujitsu-Siemens Primergy Econel 100 S2
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
The installer doesn't propose software raid configuration.
Only Full disk usage, LVM support, LVM encrypted and Manual are proposed.
In the Manual section, no RAID configuration is available.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
I was trying to install Lenny with Software RAID 1
During first installation, I wasn't asked for RAID configuration.
I decided to install on a single disk (with 2 partitions - one for /boot
and another for a LVM).
First installation ended perfectly, but on a single disk (/dev/sda) and no RAID
Then (from http://www.debian-administration.org/articles/238 ) :
modify partitions types of /dev/sda as FD (Linux RAID autodetect)
copy partitions on /dev/sdb
create raid level 1 with /dev/sda missing and /dev/sdb present
stop following the tutorial and rebooted.
trying to reinstall from CD
During second installation, I selected manual partition and the 'Software RAID'
configuration was proposed.
The installer work pretty well, allowing to erase everything I created before.
I could properly create new RAID devices, and use them as I wanted
(one for /boot and the other as a LVM volume)
Installation ended perfectly
I've used this workaround on two differents systems (same as twins).
I've not tried other system as for now.
I think that modifying partitions type as FD could be enough for the installer
to propose Software RAID configuration, but I've no time to try now.
Why doesn't Lenny propose RAID software as an option (like LVM) ?
I think Etch did.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20080522"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux s3mail 2.6.24-1-486 #1 Thu May 8 01:29:10 UTC 2008 i686 unknown
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 3200/3210 Chipset
DRAM Controller [8086:29f0] (rev 01)
lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2
Gigabit Network Connection [8086:10bd] (rev 02)
lspci -knn: Kernel driver in use: e1000e
lspci -knn: Kernel modules: e1000e
lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB UHCI Controller #4 [8086:2937] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB UHCI Controller #5 [8086:2938] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB UHCI Controller #6 [8086:2939] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: Kernel modules: ehci-hcd
lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB UHCI Controller #1 [8086:2934] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB UHCI Controller #2 [8086:2935] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB UHCI Controller #3 [8086:2936] (rev 02)
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: Kernel modules: uhci-hcd
lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9
Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: Kernel modules: ehci-hcd
lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 92)
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC
Interface Controller [8086:2916] (rev 02)
lspci -knn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH
(ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02)
lspci -knn: Kernel driver in use: ahci
lspci -knn: Kernel modules: ahci
lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
Controller [8086:2930] (rev 02)
lspci -knn: 01:07.0 VGA compatible controller [0300]: ATI Technologies Inc
ES1000 [1002:515e] (rev 02)
lsmod: Module Size Used by
lsmod: ufs 71428 0
lsmod: qnx4 10628 0
lsmod: ntfs 199744 0
lsmod: dm_mod 54596 13
lsmod: raid456 119824 0
lsmod: async_xor 2816 1 raid456
lsmod: async_memcpy 1920 1 raid456
lsmod: async_tx 2560 1 raid456
lsmod: xor 14344 2 raid456,async_xor
lsmod: raid1 21504 2
lsmod: raid0 7680 0
lsmod: md_mod 71956 5 raid456,raid1,raid0
lsmod: xfs 487540 0
lsmod: reiserfs 207488 0
lsmod: jfs 163932 0
lsmod: ext3 120328 6
lsmod: jbd 39444 1 ext3
lsmod: vfat 11776 0
lsmod: fat 47772 1 vfat
lsmod: e1000e 87332 0
lsmod: nls_iso8859_1 4096 0
lsmod: isofs 32164 0
lsmod: zlib_inflate 14336 1 isofs
lsmod: rsrc_nonstatic 11776 0
lsmod: pcmcia_core 36624 1 rsrc_nonstatic
lsmod: ide_generic 1152 0 [permanent]
lsmod: ide_core 106456 1 ide_generic
lsmod: usb_storage 76736 0
lsmod: vga16fb 13068 2
lsmod: vgastate 8192 1 vga16fb
lsmod: fan 4740 0
lsmod: sg 33440 0
lsmod: sr_mod 16420 0
lsmod: cdrom 32416 1 sr_mod
lsmod: sd_mod 27024 6
lsmod: parport_pc 33316 0
lsmod: parport 33096 1 parport_pc
lsmod: floppy 54148 0
lsmod: ahci 26116 4
lsmod: libata 144880 1 ahci
lsmod: scsi_mod 141068 5 usb_storage,sg,sr_mod,sd_mod,libata
lsmod: ehci_hcd 32140 0
lsmod: uhci_hcd 22800 0
lsmod: usbcore 130924 4 usb_storage,ehci_hcd,uhci_hcd
lsmod: thermal 15900 0
lsmod: processor 28336 1 thermal
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 453196 32 453164 0% /dev
df: tmpfs 453196 32 453164 0% /dev
df: /dev/mapper/s3mail-root
df: 273674 88720 170823 34% /target
df: /dev/md0 241036 14933 213659 7% /target/boot
df: /dev/mapper/s3mail-home
df: 142359336 192148 134935700 0% /target/home
df: /dev/mapper/s3mail-tmp
df: 388741 10288 358383 3% /target/tmp
df: /dev/mapper/s3mail-usr
df: 4922684 396800 4275824 8% /target/usr
df: /dev/mapper/s3mail-var
df: 2955216 231972 2573128 8% /target/var
df: /dev/mapper/s3mail-root
df: 273674 88720 170823 34% /dev/.static/dev
df: tmpfs 453196 32 453164 0% /target/dev
free: total used free shared buffers
free: Mem: 906396 628096 278300 0 43324
free: Swap: 2719736 0 2719736
free: Total: 3626132 628096 2998036
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 15
/proc/cpuinfo: model name : Intel(R) Pentium(R) Dual CPU E2160 @
1.80GHz
/proc/cpuinfo: stepping : 13
/proc/cpuinfo: cpu MHz : 1795.587
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep
mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx
lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16
xtpr lahf_lm
/proc/cpuinfo: bogomips : 3594.01
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-040f : pnp 00:03
/proc/ioports: 04d0-04d1 : pnp 00:03
/proc/ioports: 0500-057f : pnp 00:03
/proc/ioports: 0800-080f : pnp 00:03
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-107f : 0000:00:1f.0
/proc/ioports: 1000-107f : pnp 00:03
/proc/ioports: 1000-1003 : ACPI PM1a_EVT_BLK
/proc/ioports: 1004-1005 : ACPI PM1a_CNT_BLK
/proc/ioports: 1008-100b : ACPI PM_TMR
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1020-102f : ACPI GPE0_BLK
/proc/ioports: 1100-110f : pnp 00:03
/proc/ioports: 1180-11bf : 0000:00:1f.0
/proc/ioports: 1180-11bf : pnp 00:03
/proc/ioports: 1820-183f : 0000:00:19.0
/proc/ioports: 1820-183f : e1000e
/proc/ioports: 1840-185f : 0000:00:1a.0
/proc/ioports: 1840-185f : uhci_hcd
/proc/ioports: 1860-187f : 0000:00:1a.1
/proc/ioports: 1860-187f : uhci_hcd
/proc/ioports: 1880-189f : 0000:00:1a.2
/proc/ioports: 1880-189f : uhci_hcd
/proc/ioports: 18a0-18bf : 0000:00:1d.0
/proc/ioports: 18a0-18bf : uhci_hcd
/proc/ioports: 18c0-18df : 0000:00:1d.1
/proc/ioports: 18c0-18df : uhci_hcd
/proc/ioports: 18e0-18ff : 0000:00:1d.2
/proc/ioports: 18e0-18ff : uhci_hcd
/proc/ioports: 1c00-1c1f : 0000:00:1f.2
/proc/ioports: 1c20-1c3f : 0000:00:1f.3
/proc/ioports: 1c60-1c63 : 0000:00:1f.2
/proc/ioports: 1c64-1c67 : 0000:00:1f.2
/proc/ioports: 1c68-1c6f : 0000:00:1f.2
/proc/ioports: 1c70-1c77 : 0000:00:1f.2
/proc/ioports: 2000-2fff : PCI Bus #01
/proc/ioports: 2000-20ff : 0000:01:07.0
/proc/ioports: fe00-fe00 : pnp 00:03
/proc/ioports: ff00-ff00 : pnp 00:03
/proc/iomem: 00000000-0009cbff : System RAM
/proc/iomem: 0009cc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c8fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3febffff : System RAM
/proc/iomem: 00100000-002b6004 : Kernel code
/proc/iomem: 002b6005-0036ade3 : Kernel data
/proc/iomem: 003bf000-003f595b : Kernel bss
/proc/iomem: 3fec0000-3fec8fff : ACPI Tables
/proc/iomem: 3fec9000-3fecbfff : ACPI Non-volatile Storage
/proc/iomem: 3fecc000-3fefefff : reserved
/proc/iomem: 3ff00000-3fffffff : reserved
/proc/iomem: d0000000-d7ffffff : PCI Bus #01
/proc/iomem: d0000000-d7ffffff : 0000:01:07.0
/proc/iomem: d8000000-d80fffff : PCI Bus #01
/proc/iomem: d8000000-d800ffff : 0000:01:07.0
/proc/iomem: d8020000-d803ffff : 0000:01:07.0
/proc/iomem: d8300000-d831ffff : 0000:00:19.0
/proc/iomem: d8300000-d831ffff : e1000e
/proc/iomem: d8320000-d8320fff : 0000:00:19.0
/proc/iomem: d8320000-d8320fff : e1000e
/proc/iomem: d8321000-d83217ff : 0000:00:1f.2
/proc/iomem: d8321000-d83217ff : ahci
/proc/iomem: d8321800-d8321bff : 0000:00:1a.7
/proc/iomem: d8321800-d8321bff : ehci_hcd
/proc/iomem: d8321c00-d8321fff : 0000:00:1d.7
/proc/iomem: d8321c00-d8321fff : ehci_hcd
/proc/iomem: d8322000-d83220ff : 0000:00:1f.3
/proc/iomem: e0000000-e3ffffff : reserved
/proc/iomem: fec00000-fec0ffff : reserved
/proc/iomem: fed13000-fed13fff : pnp 00:03
/proc/iomem: fed14000-fed17fff : pnp 00:03
/proc/iomem: fed18000-fed18fff : pnp 00:03
/proc/iomem: fed19000-fed19fff : pnp 00:03
/proc/iomem: fed1c000-fed1ffff : pnp 00:03
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ffb00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 212 IO-APIC-edge timer
/proc/interrupts: 1: 3921 IO-APIC-edge i8042
/proc/interrupts: 6: 3 IO-APIC-edge floppy
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-fasteoi acpi
/proc/interrupts: 16: 0 IO-APIC-fasteoi uhci_hcd:usb1,
uhci_hcd:usb6, ehci_hcd:usb7
/proc/interrupts: 17: 0 IO-APIC-fasteoi uhci_hcd:usb2
/proc/interrupts: 18: 0 IO-APIC-fasteoi uhci_hcd:usb3
/proc/interrupts: 19: 0 IO-APIC-fasteoi uhci_hcd:usb4,
ehci_hcd:usb8
/proc/interrupts: 20: 0 IO-APIC-fasteoi uhci_hcd:usb5
/proc/interrupts: 222: 14343 PCI-MSI-edge eth0
/proc/interrupts: 223: 1266661 PCI-MSI-edge ahci
/proc/interrupts: NMI: 0 Non-maskable interrupts
/proc/interrupts: LOC: 154233 Local timer interrupts
/proc/interrupts: TRM: 0 Thermal event interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 906396 kB
/proc/meminfo: MemFree: 278324 kB
/proc/meminfo: Buffers: 43324 kB
/proc/meminfo: Cached: 527568 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 156200 kB
/proc/meminfo: Inactive: 419484 kB
/proc/meminfo: SwapTotal: 2719736 kB
/proc/meminfo: SwapFree: 2719736 kB
/proc/meminfo: Dirty: 2184 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 4016 kB
/proc/meminfo: Mapped: 2076 kB
/proc/meminfo: Slab: 39880 kB
/proc/meminfo: SReclaimable: 30940 kB
/proc/meminfo: SUnreclaim: 8940 kB
/proc/meminfo: PageTables: 216 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 3172932 kB
/proc/meminfo: Committed_AS: 7224 kB
/proc/meminfo: VmallocTotal: 122564 kB
/proc/meminfo: VmallocUsed: 9076 kB
/proc/meminfo: VmallocChunk: 113084 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 4096 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff
ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
