Well, I re-downloaded and re-copied the resulting complete image to a micro-SD card by a different manufacturer, and lo and behold, it all works this time!
Sigh! Sorry for all the noise, Rick On Sun, Jul 17, 2022, at 6:47 PM, Rick Thomas wrote: > On Sun, Jul 17, 2022, at 6:37 PM, Rick Thomas wrote: >> I'm experimenting with installing Bullseye on a Cubox-i4Pro I keep >> around for testing purposes. >> >> I followed the instructions at: >> >> >> http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/current/images/netboot/SD-card-images/README.concatenateable_images >> >> Then I dd'ed the resulting complete image onto an 8GB microSD card, >> which I then inserted into the microSD slot in the Cubox-I. When I >> applied power, I got the attached log on the serial console. >> >> Does anyone know what I'm doing wrong? Is this a bug in the installer? >> If so, what's the best way for me to volunteer to help as a tester in >> debugging it. >> >> Rick >> Attachments: >> * screenlog > > In case it helps, the two components I used in this experiment are: > > > http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/20210731+deb11u4/images/netboot/SD-card-images/firmware.MX6_Cubox-i.img.gz > > and > > > http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/20210731+deb11u4/images/netboot/SD-card-images/partition.img.gz > > On the web page, these files are dated 2022-07-05 15:57 . > > Any clues are appreciated! > Rick
