On Thu, Aug 19, 2021 at 02:04:50PM +0000, Lucas Marshall wrote: > Hi, > > I’m using the Rpi compute module 4 with io board and am trying to work with > raspi bullseye arm64 however the usb connector is by default disabled. > Raspbian provide a solution in the form of an overlay > “dtoverlay=dwc2,dr_mode=host” which is pasted into the config.txt file in the > root folder of the boot partition. I haven’t been able to find a solution or > anybody who has faced the same problem. Do you have any suggestions? > > Thanks, > Lucas
Unfortunately, Raspberry Pi OS is off-topic here because, as with other Debian derivatives, they do things differently to Debian itself. They also have their own support forums at https://www.raspberrypi.org/forums/ It is possible to get a RPi4 (and presumably the Compute Module) running vanilla Debian - see https://raspi.debian.net/ (and possibly also http://flosslinuxblog.blogspot.com/2021/08/vanilla-debian-on-raspberry-pi-4-with.html Hope this helps, All the very best, as ever, Andy Cater
