Hello,
with newer Kernel the Device (Revision A) has problems with the sata
bus. I get the following erros at boot:
...
[ 119.110578] ata2.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
ncq 4096 in
[ 119.110578] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 119.125780] ata2.00: status: { DRDY }
[ 119.129462] ata2: hard resetting link
[ 119.641981] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 119.782055] ata2.00: configured for UDMA/33
[ 119.786288] ata2: EH complete
[ 119.789502] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 119.796682] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 119.805407] ata2.00: failed command: READ FPDMA QUEUED
[ 119.810573] ata2.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
ncq 4096 in
[ 119.810573] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 119.825777] ata2.00: status: { DRDY }
[ 119.829459] ata2: hard resetting link
[ 120.341985] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 120.482055] ata2.00: configured for UDMA/33
[ 120.486295] ata2: EH complete
[ 120.489513] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 120.496694] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 120.505411] ata2.00: failed command: READ FPDMA QUEUED
[ 120.510577] ata2.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
ncq 4096 in
[ 120.510577] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 120.525781] ata2.00: status: { DRDY }
[ 120.529462] ata2: hard resetting link
[ 121.041983] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 121.182054] ata2.00: configured for UDMA/33
[ 121.186288] ata2: EH complete
[ 121.189503] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 121.196681] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 121.205397] ata2.00: failed command: READ FPDMA QUEUED
[ 121.210564] ata2.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
ncq 4096 in
[ 121.210564] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 121.225767] ata2.00: status: { DRDY }
[ 121.229450] ata2: hard resetting link
[ 121.741980] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 121.882054] ata2.00: configured for UDMA/33
[ 121.886292] ata2: EH complete
[ 121.889512] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 121.896696] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 121.905419] ata2.00: failed command: READ FPDMA QUEUED
[ 121.910585] ata2.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
ncq 4096 in
[ 121.910585] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 121.925808] ata2.00: status: { DRDY }
[ 121.929488] ata2: hard resetting link
[ 122.441983] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 122.582054] ata2.00: configured for UDMA/33
[ 122.586295] sd 1:0:0:0: [sdb]
[ 122.589430] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 122.595046] sd 1:0:0:0: [sdb]
[ 122.598181] Sense Key : Aborted Command [current] [descriptor]
[ 122.604054] Descriptor sense data with sense descriptors (in hex):
[ 122.610211] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff
[ 122.616727] ff ff ff ff
[ 122.619994] sd 1:0:0:0: [sdb]
[ 122.623176] Add. Sense: No additional sense information
[ 122.628403] sd 1:0:0:0: [sdb] CDB:
[ 122.631921] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 122.636893] end_request: I/O error, dev sdb, sector 0
[ 122.642056] ata2: EH complete
/dev/sdb: read f[ 122.649285] ata2.00: exception Emask 0x10 SAct 0x1
SErr 0x0 action 0x6 frozen
ailed after 0 of[ 122.656987] ata2.00: edma_err_cause=00000280
pp_flags=00000003, parity error, EDMA self-disable
4096 at 0: Inpu[ 122.666977] ata2.00: failed command: READ FPDMA QUEUED
t/output error
[ 122.673496] ata2.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0
ncq 4096 in
[ 122.673496] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 122.689957] ata2.00: status: { DRDY }
[ 122.693679] ata2: hard resetting link
[ 123.201982] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 123.342056] ata2.00: configured for UDMA/33
[ 123.346290] ata2: EH complete
[ 123.349507] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 123.356689] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 123.365406] ata2.00: failed command: READ FPDMA QUEUED
[ 123.370573] ata2.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0
ncq 4096 in
[ 123.370573] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 123.385776] ata2.00: status: { DRDY }
[ 123.389458] ata2: hard resetting link
[ 123.901980] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 124.042055] ata2.00: configured for UDMA/33
[ 124.046295] ata2: EH complete
[ 124.049512] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 124.056694] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 124.065420] ata2.00: failed command: READ FPDMA QUEUED
[ 124.070587] ata2.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0
ncq 4096 in
[ 124.070587] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 124.085789] ata2.00: status: { DRDY }
[ 124.089471] ata2: hard resetting link
[ 124.601981] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 124.742055] ata2.00: configured for UDMA/33
[ 124.746288] ata2: EH complete
[ 124.749504] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 124.756681] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 124.765406] ata2.00: failed command: READ FPDMA QUEUED
[ 124.770573] ata2.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0
ncq 4096 in
[ 124.770573] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 124.785782] ata2.00: status: { DRDY }
[ 124.789466] ata2: hard resetting link
[ 125.301983] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 125.442056] ata2.00: configured for UDMA/33
[ 125.446292] ata2: EH complete
[ 125.449509] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 125.456684] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 125.465400] ata2.00: failed command: READ FPDMA QUEUED
[ 125.470568] ata2.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0
ncq 4096 in
[ 125.470568] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 125.485770] ata2.00: status: { DRDY }
[ 125.489453] ata2: hard resetting link
[ 126.002204] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 126.142054] ata2.00: configured for UDMA/33
[ 126.146292] ata2: EH complete
[ 126.149506] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x0 action
0x6 frozen
[ 126.156690] ata2.00: edma_err_cause=00000280 pp_flags=00000003,
parity error, EDMA self-disable
[ 126.165414] ata2.00: failed command: READ FPDMA QUEUED
[ 126.170582] ata2.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0
ncq 4096 in
[ 126.170582] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask
0x10 (ATA bus error)
[ 126.185784] ata2.00: status: { DRDY }
[ 126.189466] ata2: hard resetting link
[ 126.701980] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 126.842055] ata2.00: configured for UDMA/33
[ 126.846297] sd 1:0:0:0: [sdb]
[ 126.849434] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 126.855050] sd 1:0:0:0: [sdb]
[ 126.858184] Sense Key : Aborted Command [current] [descriptor]
[ 126.864057] Descriptor sense data with sense descriptors (in hex):
[ 126.870216] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff
[ 126.876730] ff ff ff ff
[ 126.879998] sd 1:0:0:0: [sdb]
[ 126.883182] Add. Sense: No additional sense information
[ 126.888407] sd 1:0:0:0: [sdb] CDB:
[ 126.891931] Read(10): 28 00 3a 38 5f 80 00 00 08 00
[ 126.896908] end_request: I/O error, dev sdb, sector 976772992
[ 126.902749] ata2: EH complete
/dev/sdb: read f[ 126.909572] ata2.00: exception Emask 0x10 SAct 0x1
SErr 0x0 action 0x6 frozen
Best Regards,
