On Tue, 6 Jun 2017 02:24:41 +0200
Cyril Brulebois <k...@debian.org> wrote:
>
> I'm not familiar with those images, but they should contain u-boot
> configuration and needed bits. From the log above, it looks like a
> vmlinuz was found, but initrd.gz couldn't be read. Cc'ing debian-arm@
> since I don't know much more about this.
>
My mistake, sorry. I copy&paste a log from a daily image instead of current
image. The right output is:
U-Boot SPL 2016.11+dfsg1-4 (Mar 27 2017 - 18:39:51)
DRAM: 512 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1
U-Boot 2016.11+dfsg1-4 (Mar 27 2017 - 18:39:51 +0000) Allwinner Technology
CPU: Allwinner A10 (SUN4I)
Model: Olimex A10-OLinuXino-LIME
I2C: ready
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
SCSI: SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: eth0: ethernet@01c0b000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
1575 bytes read in 26 ms (58.6 KiB/s)
## Executing script at 43100000
Mainline u-boot / new-style environment detected.
reading vmlinuz
** Unable to read file vmlinuz **
SCRIPT FAILED: continuing...
PS: The daily image, indeed had the vmlinuz, but not the initrd.img.
Thanks in advance.
--
Diego Roversi <die...@tiscali.it>
