On Mon, 20 Apr 2015 20:59:46 +0100 Neil Williams <codeh...@debian.org> wrote:
> > >> > On Mon, Apr 20, 2015 at 7:49 AM, Neil Williams > > >> > <codeh...@debian.org> wrote: > > >> >> These instructions: https://wiki.debian.org/PandaBoard don't > > >> >> give a bootable SD card for the panda-es: > > >> >> > > >> >> U-Boot SPL 2014.10+dfsg1-5 (Apr 07 2015 - 22:19:50) U-Boot 2015.04+dfsg1-2 (May 26 2015 - 05:33:36) works - thank you. I'm using the MLO and u-boot.img file from the u-boot-omap package. Sorry it took so long to get back to you on this after the upload on 26 May 2015 but I was away for a work event. > > >> >> OMAP4460 ES1.1 > > >> >> SPL: Please implement spl_start_uboot() for your board > > >> >> SPL: Direct Linux boot not active! > > >> >> reading u-boot.img > > >> >> spl_load_image_fat: error reading image u-boot.img, err - -1 > > >> >> ### ERROR ### Please RESET the board ### > > >> >> > > >> >> There's no u-boot.img in the package. U-Boot 2015.04+dfsg1-2 (May 26 2015 - 05:33:36) now provides the u-boot.img. Thanks. https://tracker.debian.org/news/686934 On Mon, 20 Apr 2015 15:06:56 -0500 Robert Nelson <robertcnel...@gmail.com> wrote: > bootz is enable on the omap4_panda target by default in u-boot > "v2014.10", the debian patches didn't patch that out.. > > http://git.denx.de/?p=u-boot.git;a=blob;f=include/configs/ti_armv7_common.h;h=85171dbb4c4fb9e13e6a9e9766f98c9820da2490;hb=c43fd23cf619856b0763a64a6a3bcf3663058c49#l176 U-Boot# help ? - alias for 'help' askenv - get environment variables from stdin base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol bootz - boot Linux zImage image from memory cmp - memory compare So now I can test with bootz as well. :-) -- Neil Williams ============= http://www.linux.codehelp.co.uk/
pgpDaAnY7JQwf.pgp
Description: OpenPGP digital signature
