I think i found the problem! i had timeouts while tftp-transfer of the initrd.gz and vmlinuz and after i switched to direct communication pc<->cubietruck(before i had used a switch inbetween) i had no timeouts and the hdd was recognized!
So the installer is successfully finished! But after a restart i cannot boot the installed hdd. This is my log: http://hastebin.com/ozuzidixaj.pl Did i forget something? Regards Michael 2014-07-04 13:52 GMT+02:00 Michi Ti <rubiktu...@gmail.com>: > I think i found the problem! > > i had timeouts while tftp-transfer of the initrd.gz and vmlinuz and after > i switched to direct communication pc<->cubietruck(before i had used a > switch inbetween) i had no > timeouts and the hdd was recognized! > > So the installer is successfully finished! > > But after a restart i cannot boot the installed hdd. > > This is my log: http://hastebin.com/ozuzidixaj.pl > > Did i forget something? > > Regards > Michael > > > 2014-07-04 8:41 GMT+02:00 Ian Campbell <i...@hellion.org.uk>: > > On Thu, 2014-07-03 at 23:41 +0200, Michi Ti wrote: >> >> > syslog: http://hastebin.com/ayuqoquqog.vhdl >> >> This shows kernel package version of 3.14.7-1 which is the current >> Jessie version, but the daily builds use sid udebs and sid now has >> 3.14.9-1 which I suspect is leading to these messages: >> scsi_mod: Unknown symbol netlink_capable (err 0) >> and therefore non-working SCSI/SATA. >> >> I think you just got unlucky and downloaded a daily image right before >> the transition. Can you try today's daily version please. >> >> Ian. >> >> >> >
