On Sun, 2014-04-27 at 23:18 +0200, tpsamw1 wrote: > Hello, > > Yesterday I've upgraded Debian from stable release to testing > (Jessie). It was fine for some time, today I've reinstalled qcontrol - > I don't know why, but with reinstalling qcontrol installer started to > flash kernel image (maybe it wasn't flashed for first time?).
qcontrol has an initramfs hook so it can disable the boot watchdog early in boot (otherwise it can fire while you are fsking. > After booting device network is down - front led is off. > > I've mounted disk on other device and copied some logs, in kern.log I see: > > Apr 27 14:30:34 qnap kernel: [ 0.000000] Linux version 3.13-1-orion5x > (debian-ker...@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-19) ) #1 > Debian 3.13.10-1 (2014-04-15) > > Apr 27 14:30:34 qnap kernel: [ 29.282933] libphy: PHY orion-mdio-mii:08 not > found > Apr 27 14:30:34 qnap kernel: [ 29.314674] platform mv643xx_eth_port.0: > Driver mv643xx_eth_port requests probe deferral > > Apr 27 14:30:34 qnap kernel: [ 30.238754] libphy: PHY orion-mdio-mii:08 not > found > Apr 27 14:30:34 qnap kernel: [ 30.271171] platform mv643xx_eth_port.0: > Driver mv643xx_eth_port requests probe deferral > Apr 27 14:30:34 qnap kernel: [ 30.477932] mv643xx_eth_port > mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:8c:3b:9c > > Apr 27 14:30:34 qnap kernel: [ 50.456008] mv643xx_eth_port > mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control > disabled > Apr 27 14:30:34 qnap kernel: [ 50.466158] IPv6: ADDRCONF(NETDEV_CHANGE): > eth0: link becomes ready Looks a bit like https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=719680 which was thought to be fixed. Can you provide a full dmesg please. Ian. -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/1398682679.29700.60.ca...@kazak.uk.xensource.com
