On Sun, 2013-05-19 at 15:12 +0100, Ian Campbell wrote: > On Sun, 2013-05-19 at 14:41 +0100, Tixy wrote: > > On Sun, 2013-05-19 at 12:33 +0100, Ian Campbell wrote: > > > > You may have (harmlessly) ended up appending the DTB twice since I think > > > the installer uImage has it already there... > > > > It doesn't, I just checked, and if it did have the DreamPlug dtb it > > wouldn't work on the iconnect which also has a dtb in the kirkwood > > kernel package and so I assume is also supported. > > Which kernel were you using?
I was using the one linked to from http://www.cyrius.com/debian/kirkwood/sheevaplug/install/ which I now see is the SheevaPlug one. > ftp://ftp.uk.debian.org/debian/dists/wheezy/main/installer-armel/current/images/kirkwood/netboot/marvell/dreamplug/ > should have the device tree appended. Yes, it does. Seems that Martin Michlmayr's otherwise excellent pages have just had the DreamPlug added to the list of supported devices without any indication that you need a different uImage and that the process for updating U-Boot is different. Sitting here looking at the DreamPlug with it's ugly and fragile module taped to it so I've got a serial port, and cut'n'pasting commands 8 characters at a time because said serial doesn't have hardware flow control and will drop character otherwise, I can't help but suspect that the plug is going to get put pack in the cupboard and not see the light of day again. Now if only I had bought a couple of OpenRD Ultimates when they were available. The certainly look the business. -- Tixy -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1368977858.3441.32.ca...@computer5.home
