Hi Brian, Le 10/04/2013 14:41, Brian Platt a écrit : > I'm tring to install debian on the Thecus N2100 using the instructions from > http://www.cyrius.com/debian/iop/n2100/ however when formatting the > partitions the bar goes up to 33% (I know it can take ages for the bar to > update) as expected however for some reason after a few minutes hard disk > activity stops and eventually the network connection is dropped. It seems > someone had a similar problem here > http://blog.coldtobi.de/1_coldtobis_blog/archive/171_installing_debian_on_the_thecus_n2100_--_part_3_--_installing_debian.html > . I've tried raid non raid single and dual drives, manual and guided setup > and it always fails. I've also tried the ssh connection via putty and via > linux terminal. I thought it was hardware problem so bought another one with > new drivers etc and still the problem exists. > > Anyone got any ideas what could be going on?
I have few thecus N2100 working 24/24 7/7 while following my notes[1] (2 years old) about debianized Thecus-N2100. May be you can try to plug a serial console for debugging the issue you seem to encounter. Regards, drEagle [1] https://doukki.net/doku.php?id=wiki:notes:n2100
signature.asc
Description: OpenPGP digital signature
