On Thu, 30 Aug 2012 13:05:36 +0100 Brian Platt <brianpl...@hotmail.com> allegedly wrote:
> > I'm getting in bit of flap setting up partitions manually for my > NSLU2 normally i'd use the graphical installer and guided > partitioning but it's no longer available so have to partition > manually on another linux machine first. I'm using a 16GB flash drive > and after many attempts came up with these partitions > > Device Boot Start End Blocks Id System > /dev/sde1 * 1 245 250864 83 > Linux /dev/sde2 246 4061 3907584 83 > Linux /dev/sde3 4062 14996 11197440 5 > Extended /dev/sde5 4062 4123 63472 82 > Linux swap / Solaris /dev/sde6 4124 14996 > 11133936 83 Linux > Brian Have you checked out Martin Michlmayr's site? http://www.cyrius.com/debian/nslu2/unpack.html On one of my slugs (running wheezy/sid installed on an 8 Gig USB stick) I have the following setup Disk /dev/sda: 8004 MB, 8004304896 bytes 255 heads, 63 sectors/track, 973 cylinders, total 15633408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00014825 Device Boot Start End Blocks Id System /dev/sda1 * 63 498014 248976 83 Linux /dev/sda2 498015 15133229 7317607+ 83 Linux /dev/sda3 15133230 15631244 249007+ 5 Extended /dev/sda5 15133293 15631244 248976 82 Linux swap / Solaris --------------------------------------------------------------------- blog: baldric.net fingerprint: FC23 3338 F664 5E66 876B 72C0 0A1F E60B 5BAD D312 Note that I have recently upgraded my GPG key see: http://baldric.net/2012/07/20/gpg-key-upgrade/ ---------------------------------------------------------------------
signature.asc
Description: PGP signature
