On Sat, 18 Aug 2012 22:35:43 +1000, Matt Palmer <mpal...@debian.org> wrote: > If you're referring to > http://images.anandtech.com/doci/4706/Screen%20Shot%202011-11-13%20at%204.20.09%20AM.png > specifically, then yes, that does say "CON1", and it's a 4-pin header > (which is what I've always seen on other devices for serial).
Unfortunately no such luck. I disassembled my GoFlex Satellite this morning and the CON1 connector is for the battery. There was a promising set of 10 pads along the bottom of the PCB, but I checked each of them with an oscilloscope while power cycling and saw no sign of any serial activity. The dmesg clearly shows that a console is configured to run on /dev/ttyS0, I just don't know where to find it. Pictures from my teardown (especially the bottom of the PCB) are here: http://braddock.com/~braddock/expire/satellite If you see anything I might try please let me know. -braddock -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/8eaf18b3a760eb993cec63e6a418d...@braddock.com
