Some further info/progress. This post http://lists.debian.org/debian-arm/2009/08/msg00011.html set me wondering why pwmconfig would not work on my system, no such file. The resolution was to download the lm-sensors source and compile it locally on the SS4000e.
>apt-get install build-essential bison flex (Bison, flex were necessary I found later). >cd ~ root@FREESTOR:~# apt-get source lm-sensors Reading package lists... Done Building dependency tree Reading state information... Done Need to get 221 kB of source archives. Get:1 http://ftp.us.debian.org/debian/ squeeze/main lm-sensors-3 1:3.1.2-6 (dsc) [1,099 B] Get:2 http://ftp.us.debian.org/debian/ squeeze/main lm-sensors-3 1:3.1.2-6 (tar) [189 kB] Get:3 http://ftp.us.debian.org/debian/ squeeze/main lm-sensors-3 1:3.1.2-6 (diff) [31.1 kB] Fetched 221 kB in 0s (577 kB/s) gpgv: keyblock resource `/root/.gnupg/trustedkeys.gpg': file open error gpgv: Signature made Wed 26 May 2010 01:35:43 PM EDT using DSA key ID F1BCDB73 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./lm-sensors-3_3.1.2-6.dsc dpkg-source: info: extracting lm-sensors-3 in lm-sensors-3-3.1.2 dpkg-source: info: unpacking lm-sensors-3_3.1.2.orig.tar.gz dpkg-source: info: applying lm-sensors-3_3.1.2-6.diff.gz >make all >make install Pwmconfig now works and writes a /etc/fancontrol config file thus # Configuration file generated by pwmconfig, changes will be lost INTERVAL=10 DEVPATH=hwmon0=devices/platform/IOP3xx-I2C.0/i2c-0/0-002d DEVNAME=hwmon0=w83792d FCTEMPS= hwmon0/device/pwm1=hwmon0/device/temp1_input FCFANS= hwmon0/device/pwm1=hwmon0/device/fan1_input MINTEMP= hwmon0/device/pwm1=30 MAXTEMP= hwmon0/device/pwm1=60 MINSTART= hwmon0/device/pwm1=150 MINSTOP= hwmon0/device/pwm1=100 MINPWM=hwmon0/device/pwm1=195 See also the fancontrol.txt in the source tree docs for lm-sensors I also found from this post http://lm-sensors.org/browser/lm-sensors/trunk/doc/fan-divisors that explains fan divisors. I edited the w83792d section in /etc/sensors3.conf thus See also fan-divisors in the source tree docs chip "w83792d-*" label in0 "VcoreA" label in1 "VcoreB" label in6 "+5V" label in7 "5VSB" label in8 "Vbat" set in6_min 5.0 * 0.90 set in6_max 5.0 * 1.10 set in7_min 5.0 * 0.90 set in7_max 5.0 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.0 * 1.10 # Fans - only fan1 is connected set fan1_div 4 ignore fan2 ignore fan3 ignore fan4 ignore fan5 label fan1 "Case Fan" Need to run sensors -s after changes to /etc/sensors3.conf Now I have a fan speed reported. root@FREESTOR:/etc# sensors w83792d-i2c-0-2d Adapter: IOP3xx-I2C VcoreA: +1.29 V (min = +0.00 V, max = +2.04 V) VcoreB: +0.00 V (min = +0.00 V, max = +2.04 V) in2: +2.57 V (min = +0.00 V, max = +4.08 V) in3: +3.30 V (min = +0.00 V, max = +4.08 V) in4: +0.00 V (min = +0.00 V, max = +4.08 V) in5: +1.99 V (min = +0.00 V, max = +4.08 V) +5V: +4.94 V (min = +4.49 V, max = +5.50 V) 5VSB: +4.92 V (min = +4.49 V, max = +5.50 V) Vbat: +0.00 V (min = +2.69 V, max = +3.30 V) ALARM Case Fan: 2596 RPM (min = 0 RPM, div = 4) temp1: +41.0°C (high = +127.0°C, hyst = +0.0°C) temp2: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM The temperature readings are still a bit weird. Temp1 is I suppose from the CPU the internal diode and temp2/3 would be the sensors on the SATA board which seem to be stuck high. These readings were I suppose the cause of the original Freestor 4020 firmware shutting down the NAS as soon as it had started. CJW -----Original Message----- From: Chris Wilkinson [mailto:kins...@verizon.net] Sent: Tuesday, July 24, 2012 12:13 PM To: debian-arm@lists.debian.org Subject: RE: SS4000E Fan speed, LEDS and power button Could someone be kind enough to post the output they get from these commands? CJW -----Original Message----- From: Chris Wilkinson [mailto:kins...@verizon.net] Sent: Friday, July 20, 2012 11:58 AM To: 'Arnaud Patard (Rtp)' Cc: debian-arm@lists.debian.org Subject: RE: SS4000E Fan speed, LEDS and power button Installed lm-sensors. sensors-detect detects the w83792d chip root@Freestor:~# sensors w83792d-i2c-0-2d Adapter: IOP3xx-I2C VcoreA: +1.28 V (min = +0.00 V, max = +2.04 V) VcoreB: +0.00 V (min = +0.00 V, max = +2.04 V) in2: +2.55 V (min = +0.00 V, max = +4.08 V) in3: +3.30 V (min = +0.00 V, max = +4.08 V) in4: +0.00 V (min = +0.00 V, max = +4.08 V) in5: +1.99 V (min = +0.00 V, max = +4.08 V) +5V: +4.92 V (min = +4.49 V, max = +5.50 V) 5VSB: +4.93 V (min = +4.49 V, max = +5.50 V) Vbat: +0.00 V (min = +2.69 V, max = +3.30 V) ALARM fan1: 0 RPM (min = 0 RPM, div = 2) fan2: 0 RPM (min = 0 RPM, div = 2) fan3: 0 RPM (min = 0 RPM, div = 2) fan4: 0 RPM (min = 0 RPM, div = 2) fan5: 0 RPM (min = 0 RPM, div = 2) temp1: +46.0°C (high = +127.0°C, hyst = +0.0°C) temp2: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM All the fans are zero so presumably it's not reading the fan speed from the chip. root@Freestor:~# modprobe -l | grep 83792 kernel/drivers/hwmon/w83792d.ko root@Freestor:~# modinfo w83792d filename: /lib/modules/2.6.32-5-iop32x/kernel/drivers/hwmon/w83792d.ko license: GPL description: W83792AD/D driver for linux-2.6 author: Chunhao Huang @ Winbond <dzs...@winbond.com.tw> alias: i2c:w83792d depends: vermagic: 2.6.32-5-iop32x mod_unload modversions ARMv5 parm: force:List of adapter,address pairs to boldly assume to be present (array of short) parm: force_w83792d:List of adapter,address pairs which are unquestionably assumed to contain a `w83792d' chip (array of short) parm: probe:List of adapter,address pairs to scan additionally (array of short) parm: ignore:List of adapter,address pairs not to scan (array of short) parm: force_subclients:List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2} (array of short) parm: init:Set to one to force chip initialization (bool) CJW -----Original Message----- From: Arnaud Patard (Rtp) [mailto:arnaud.pat...@rtp-net.org] Sent: Tuesday, July 17, 2012 3:44 PM To: Chris Wilkinson Cc: debian-arm@lists.debian.org Subject: Re: SS4000E Fan speed, LEDS and power button "Chris Wilkinson" <kins...@verizon.net> writes: Please note that I'm about to talk about em7210 so things may be different on em7220. > Has anyone succeeded to control the fan speed according to > temperature, the fan is handled by a w83792*. > control the front panel LEDS and power off with the power button on this > device? The leds are handled by the f75111 chip from fintek. There's a driver here http://git.rtp-net.org/?p=ss4000e.git;a=tree The needed patches are : f75111.patch add_f75111_pdata.patch em7210_add_missing_leds.patch I'm using them on top of 3.4 for several weeks now. For the buttons, there's em7210_add_gpio_keys.patch. It was relying on custom gpio input driver but there's nowadays needed stuff in mainline. > > I built http://lm-sensors.org/ but it couldn't recognize any sensors. > > I also haven't been able to figure out how to set up 4 disks in a RAID5. The > d-I only prompted to install 1 disk. I can format/mount the other 3 and but > don't know how to create the 4-disk RAID. RAID5 needs only 3 drives, so create the RAID5 on 3 drives and then add the last one as spare. Arnaud -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/004201cd6690$64aa7970$2dff6c50$@net -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/001b01cd69b7$2a147d90$7e3d78b0$@net -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/004101cd69df$e1e13a30$a5a3ae90$@net
